platformio.ini

@@ -17,8 +17,8 @@
 #data_dir=data_sensoresp2
 #data_dir=data_sensoresp3
 #data_dir=data_sensoresp4
-data_dir=data_sensoresp5
-#data_dir=data_sensoresp3dprinter
+#data_dir=data_sensoresp5
+data_dir=data_sensoresp3dprinter
 
 
 #Outdoor
@@ -237,17 +237,12 @@ build_flags =
     -D dataBH1750_minchange=10.0
     -D dataBH1750_senddelaymax=1000*60*2
 
-    -D SENSOR_VL53L1X
-    -D dataBH1750_minchange=10.0
-    -D dataBH1750_senddelaymax=1000*60*2
-
 
 lib_deps =
     adafruit/DHT sensor library@1.3.10
     claws/BH1750@1.1.4
     ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
     Homie@3.0.0
-    pololu/VL53L1X @ ^1.3.0
 
 
 
@@ -263,7 +258,7 @@ monitor_speed = 115200
 build_flags =
     -D SENSOR_HTU21D
     -D dataHTU21D_temperature_minchange=0.2
-    -D dataHTU21D_temperature_senddelaymax=1000*60*20
+    -D dataHTU21D_temperature_senddelaymax=1000*60*10
     -D dataHTU21D_humidity_minchange=1.0
     -D dataHTU21D_humidity_senddelaymax=1000*60*10
 

src/main.cpp

@@ -228,22 +228,6 @@ struct sensordata
   #endif
 #endif
 
-#ifdef SENSOR_VL53L1X
-  #ifndef WIRE_H
-  #include <Wire.h>
-  #define WIRE_H
-  #endif
-  #include <VL53L1X.h>
-  VL53L1X vl53l1x;
-  bool vl53l1xinit_ok=false;
-  struct sensordata dataVL53L1X_range;
-  struct sensordata dataVL53L1X_peak_signal_count_rate;
-  struct sensordata dataVL53L1X_ambient_count_rate;
-  
-  uint16_t value_vl53l1x_range;
-  unsigned long lastread_vl53l1x=0;
-#endif
-
 #ifdef SENSOR_ANEMOMETER
   //uses ATS177 Latched hall sensor for rotation sensing
   sensordata dataAnemometer;
@@ -478,23 +462,6 @@ void setup() {
     #endif
   #endif
 
-  #ifdef SENSOR_VL53L1X
-    Serial.println("initializing vl53l1x");
-    vl53l1x.setTimeout(500);
-    if (!vl53l1x.init()) {
-      Serial.println("No vl53l1x found!");
-    }else{
-      vl53l1xinit_ok=true;
-      vl53l1x.setDistanceMode(VL53L1X::Long);
-      vl53l1x.setMeasurementTimingBudget(50000);
-      vl53l1x.startContinuous(50); //This period should be at least as long as the timing budget.
-    }
-    #ifdef dataVL53L1X_range_minchange
-      dataVL53L1X_range.minchange=dataVL53L1X_range_minchange;
-    #endif
-    
-  #endif
-
   #ifdef SENSOR_ANEMOMETER
     pinMode(ANEMOMETERPIN,INPUT_PULLUP);
     attachInterrupt(digitalPinToInterrupt(ANEMOMETERPIN),interrupt_anemometer,CHANGE); //anemometer interrupt
@@ -607,10 +574,6 @@ void setup() {
     sensorNode.advertise("colortemp");
   #endif
 
-  #ifdef SENSOR_VL53L1X
-    sensorNode.advertise("range");
-  #endif  
-
   #ifdef SENSOR_ANEMOMETER
     sensorNode.advertise("windspeed");
   #endif
@@ -1197,54 +1160,6 @@ void loop_TCS34725_colortemp()
 }
 #endif
 
-
-
-#ifdef SENSOR_VL53L1X
-void loop_VL53L1X_range()
-{
-  sensordata &d=dataVL53L1X_range;
-  
-  bool _changed=false;
-  if (millis() >= (d.lastreadtime+d.readdelay)) {
-    if (millis() >= (lastread_vl53l1x+d.readdelay)) { //avoid reading sensor twice in a short time
-      //tcs.getRawData(&value_tcs_r, &value_tcs_g, &value_tcs_b, &value_tcs_c);
-      vl53l1x.read();
-      lastread_vl53l1x=millis();
-    }
-    
-    value_vl53l1x_range=vl53l1x.ranging_data.range_mm;
-    Serial.print("range: ");
-    Serial.print(vl53l1x.ranging_data.range_mm);
-    Serial.print("\tstatus: ");
-    Serial.print(VL53L1X::rangeStatusToString(vl53l1x.ranging_data.range_status));
-    Serial.print("\tpeak signal: ");
-    Serial.print(vl53l1x.ranging_data.peak_signal_count_rate_MCPS);
-    Serial.print("\tambient: ");
-    Serial.print(vl53l1x.ranging_data.ambient_count_rate_MCPS);
-
-    if (abs((int)d.lastsentvalue-value_vl53l1x_range)>=d.minchange){  //int abs
-      _changed=true;
-    }
-    d.lastreadtime=millis();
-  }
-
-  if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
-    Serial.print("Sending VL53L1X range. reason=");
-    if (_changed) Serial.println("change"); else Serial.println("time");
-    checkESPStatus();
-
-    Homie.getLogger() << "range vl53l1x " << ": " << value_vl53l1x_range << endl;
-    
-    sensorNode.setProperty("range").send(String(value_vl53l1x_range));
-    
-    
-    d.lastsentvalue=value_vl53l1x_range;
-    
-    d.lastsent=millis();
-  }
-}
-#endif
-
 #ifdef SENSOR_ANEMOMETER
 void loop_anemometer()
 {