sensoresp/platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

# Flash upload with: pio run -t upload --environment sensorespx

[platformio]
#For Config upload comment in data_dir line and flash with: pio run -t uploadfs --environment sensorespx
#data_dir=data_sensoresp0
#data_dir=data_sensoresp1
#data_dir=data_sensoresp2
#data_dir=data_sensoresp3
#data_dir=data_sensoresp4
#data_dir=data_sensoresp5
#data_dir=data_sensoresp6
#data_dir=data_sensoresp7
#data_dir=data_sensoresp3dprinter
#data_dir=data_sensoresptest
data_dir=data_sensoratd03


#Outdoor
[env:sensoresp0]
platform = espressif8266 @ 2.5.0 #using old esp version, because of "obsolete API, use ::begin(WiFiClient, url)" error. Try again if fix available in platformio over vscode
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_BMP180
    -D dataBMP180_temperature_minchange=0.5
    -D dataBMP180_pressure_minchange=0.5

    -D SENSOR_TCS34725
    -D SENSOR_TCS34725_LUX_minchange=500
    -D SENSOR_TCS34725_LUX_senddelaymax=1000*60*1
    -D SENSOR_TCS34725_COLORTEMP_minchange=100
    -D SENSOR_TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078

    #-D SENSOR_HS1101
    #-D SENSOR_HS1101_PIN=D5
    #-D SENSOR_HS1101_humidity_minchange=10

    -D SENSOR_SHT31
    -D SENSOR_SHT31_humidity_minchange=5
    -D SENSOR_SHT31_temperature_minchange=0.5
    

    -D SENSOR_ML8511
    -D SENSOR_ML8511_PIN=A0
    -D SENSOR_ML8511_minchange=0.2

    -D SENSOR_ANEMOMETER
    -D SENSOR_Anemometer_PIN=D6 #Light Blue thicker cable (in distribution box)
    -D SENSOR_Anemometer_minchange=0.25
    -D SENSOR_Anemometer_readdelay=1000*30
    -D SENSOR_Anemometer_senddelaymax=1000*60*5
    -D SENSOR_ANEMOMETER_PPMtoMPS=0.0208640462
    # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))

    -D SENSOR_RAINGAUGE
    -D SENSOR_Raingauge_PIN=D7
    -D RAINGAUGE_FLIPAMOUNT=0.29914
    -D SENSOR_Raingauge_readdelay=1000
    -D SENSOR_Raingauge_senddelaymax=1000*60*60  #also used for rain waiting timeout
    # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal))
    #Cable colors from anemometers sensor (before longer able): blue=gnd, brown=vcc, white=signal

lib_deps = 
    Adafruit BMP085 Library@1.1.0
    https://github.com/adafruit/Adafruit_TCS34725#1.3.5
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0
    adafruit/Adafruit SHT31 Library@^2.2.0
    SPI

    


#Arbeitszimmer
[env:sensoresp1]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_DHT22
    -D SENSOR_DHT22_PIN=D7
    -D SENSOR_DHT22_temperature_minchange=0.2
    -D SENSOR_DHT22_humidity_minchange=2.0

    -D SENSOR_BMP180
    -D dataBMP180_temperature_minchange=0.2
    -D dataBMP180_pressure_minchange=0.5

    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D6

    -D SENSOR_LDR
    -D SENSOR_LDR_CALIB_1
    -D SENSOR_LDR_PIN=A0
    -D SENSOR_LDR_minchange=10.0
    -D SENSOR_LDR_senddelaymax=1000*60*1


lib_deps = 
    Adafruit BMP085 Library@1.1.0
    DHT sensor library@1.3.10
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0


#Wohnzimmer Air Quality
[env:sensoresp2]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_MHZ19B
    -D SENSOR_MHZ19B_SERIAL_RX=D5
    -D SENSOR_MHZ19B_SERIAL_TX=D6
    -D SENSOR_MHZ19B_minchange=10
    -D SENSOR_MHZ19B_readdelay=10*1000

    -D SENSOR_SDS018
    -D SENSOR_SDS018_SERIAL_RX=D7
    -D SENSOR_SDS018_SERIAL_TX=D8
    -D SENSOR_SDS018_PM10_minchange=4
    -D SENSOR_SDS018_PM25_minchange=4

lib_deps =
    klevytskyi/MHZ19@0.0.1
    EspSoftwareSerial@6.8.1
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0


#Wohnzimmer
[env:sensoresp3]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_DHT22
    -D SENSOR_DHT22_PIN=D7
    -D SENSOR_DHT22_temperature_minchange=0.2
    -D SENSOR_DHT22_humidity_minchange=1.0

    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D6

    -D SENSOR_BH1750
    -D dataBH1750_minchange=10.0
    -D dataBH1750_senddelaymax=1000*60*2

lib_deps = 
    adafruit/DHT sensor library@1.3.10
    claws/BH1750@1.1.4
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0


#Schlafzimmer
[env:sensoresp4]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_DHT22
    -D SENSOR_DHT22_PIN=D7
    -D SENSOR_DHT22_temperature_minchange=0.2
    -D SENSOR_DHT22_humidity_minchange=1.0

    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D0

    -D SENSOR_BH1750
    -D dataBH1750_minchange=10.0
    -D dataBH1750_senddelaymax=1000*60*2

    -D SENSOR_MHZ19B
    -D SENSOR_MHZ19B_SERIAL_RX=D5
    -D SENSOR_MHZ19B_SERIAL_TX=D6
    -D SENSOR_MHZ19B_minchange=10
    -D SENSOR_MHZ19B_readdelay=10*1000

lib_deps =
    adafruit/DHT sensor library@1.3.10
    claws/BH1750@1.1.4
    klevytskyi/MHZ19@0.0.1
    EspSoftwareSerial@6.8.1
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0


#Kueche
[env:sensoresp5]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

#monitor_port = /dev/ttyUSB0
monitor_port = COM3
monitor_speed = 115200

build_flags =
    -D SENSOR_DHT22
    -D SENSOR_DHT22_PIN=D7
    -D SENSOR_DHT22_temperature_minchange=0.2
    -D SENSOR_DHT22_humidity_minchange=1.0

    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D6

    -D SENSOR_RADAR
    -D SENSOR_RADAR_PIN=D5
    -D SENSOR_RADAR_readdelay=100
    -D SENSOR_RADAR_senddelaymax=1000*60*10

    -D SENSOR_BH1750
    -D dataBH1750_minchange=10.0
    -D dataBH1750_senddelaymax=1000*60*2

    -D SENSOR_VL53L1X
    -D SENSOR_VL53L1X_minchange=500
    -D SENSOR_VL53L1X_senddelaymax=1000*30
    -D SENSOR_VL53L1X_readdelay=500



lib_deps =
    adafruit/DHT sensor library@1.3.10
    claws/BH1750@1.1.4
    ArduinoJson@6.16.1
    marvinroger/Homie @ ^3.0.1
    pololu/VL53L1X @ ^1.3.0


#Flur Gas, motion, etc
[env:sensoresp6]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_MULTICHANNELGASGMXXX
    -D SENSOR_MULTICHANNELGASGMXXX_no2_minchange=0.3
    -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange=0.3
    -D SENSOR_MULTICHANNELGASGMXXX_voc_minchange=0.3
    -D SENSOR_MULTICHANNELGASGMXXX_co_minchange=0.3
    -D SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax=1000*60*60
    -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax=1000*60*60
    -D SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax=1000*60*60
    -D SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax=1000*60*60

    -D SENSOR_HTU21D
    -D dataHTU21D_temperature_minchange=0.3
    -D dataHTU21D_temperature_senddelaymax=1000*60*60
    -D dataHTU21D_humidity_minchange=1.0
    -D dataHTU21D_humidity_senddelaymax=1000*60*60

    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D6

    -D SENSOR_BH1750
    -D dataBH1750_minchange=10.0
    -D dataBH1750_senddelaymax=1000*60*5

lib_deps =
    https://github.com/Seeed-Studio/Seeed_Arduino_MultiGas
    adafruit/Adafruit HTU21DF Library @ ^1.0.5
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0
    claws/BH1750@1.1.4
    SPI

#Badezimmer
[env:sensoresp7]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

#monitor_port = /dev/ttyUSB0
monitor_port = COM3
monitor_speed = 115200

build_flags =
    -D SENSOR_HCSR501
    -D SENSOR_HCSR501_PIN=D6

    -D SENSOR_VL53L1X
    -D SENSOR_VL53L1X_minchange=200
    -D SENSOR_VL53L1X_senddelaymax=1000*30
    -D SENSOR_VL53L1X_readdelay=250


    -D SENSOR_SHT31
    -D SENSOR_SHT31_temperature_minchange=0.3
    -D SENSOR_SHT31_temperature_senddelaymax=1000*60*60
    -D SENSOR_SHT31_humidity_minchange=1.0
    -D SENSOR_SHT31_humidity_senddelaymax=1000*60*60
    
    

lib_deps =
    Bounce2
    ArduinoJson@6.16.1
    marvinroger/Homie @ ^3.0.1
    pololu/VL53L1X @ ^1.3.0
    adafruit/Adafruit SHT31 Library@^2.2.0
    SPI
    

#3D Printer
[env:sensoresp3dprinter]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino

monitor_port = /dev/ttyUSB0
monitor_speed = 115200

build_flags =
    -D SENSOR_HTU21D
    -D dataHTU21D_temperature_minchange=0.1
    -D dataHTU21D_temperature_senddelaymax=1000*60*60
    -D dataHTU21D_humidity_minchange=1.0
    -D dataHTU21D_humidity_senddelaymax=1000*60*60



lib_deps =
    adafruit/Adafruit HTU21DF Library @ ^1.0.5
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0
    SPI



#Arbeitszimmer
[env:sensorespatd03]
platform = espressif8266 @ 2.5.0
board = d1_mini
framework = arduino


monitor_speed = 115200

build_flags =
    -D SENSOR_DHT22
    -D SENSOR_DHT22_PIN=D7
    -D DHTTYPE=DHT11
    -D SENSOR_DHT22_temperature_minchange=0.2
    -D SENSOR_DHT22_humidity_minchange=2.0

    -D SENSOR_BMP180
    -D dataBMP180_temperature_minchange=0.2
    -D dataBMP180_pressure_minchange=0.5


lib_deps = 
    Adafruit BMP085 Library@1.1.0
    DHT sensor library@1.3.10
    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
    Homie@3.0.0