Commit Graph

24 Commits

Author SHA1 Message Date
Candas1 2c433ccbb4 Improvements 2021-01-03 12:19:16 +01:00
Candas1 177d5d4dc1 Fix 2021-01-03 02:12:33 +01:00
Candas1 0f6132a71e Renamed functions 2021-01-03 01:58:42 +01:00
Candas1 3acae8ae10 Function for setting, getting, incrementing,initializing and dumping parameters 2021-01-03 00:09:39 +01:00
EmanuelFeru df86ef44fd Dual-inputs implemented
- implemented dual-inputs functionality
- the dual-inputs combinations mentioned in Readme are now supported
2020-12-20 10:16:31 +01:00
EmanuelFeru 5ca3fa4f85 InputStruct update
- input1, input2 converted to structure
- some functions are re-positioned in util.c
2020-12-13 21:52:29 +01:00
EmanuelFeru 3fcae4fc8b Baud rate to 115200
- updated baud rate to 115200
- minor updates to match sideboard data
2020-12-07 20:33:22 +01:00
EmanuelFeru 098ca9f97c Diag: beep numbers for errors
- implemented beep numbers in case of error for easier debugging
- fixed bug: power button needs to be pressed multiple times to turn on
2020-11-28 10:38:17 +01:00
EmanuelFeru 44befc480a Input Auto-calibration
- mainly rearangement of function
- updated initialization in the auto-calibration function
- added beep for confirmation of Input protection
2020-11-18 19:16:56 +01:00
EmanuelFeru 419ef454f3
Merge branch 'master' into master 2020-11-15 18:53:55 +01:00
Candas1 1ab75e5ff9 Fix auto calibration 2020-11-15 18:09:30 +01:00
EmanuelFeru c2647ed686 Improved Standstill Hold functionality
- Standstill Hold should now engage sooner if Brake pedal is pressed to prevent continuous rolling in a Downhill situation.
2020-11-12 22:41:29 +01:00
Candas1 5dc88b7e02
Update util.h 2020-10-28 23:43:19 +01:00
Candas1 4ba8a8d82a
Add new parameter to adddeadband function 2020-10-27 20:23:35 +01:00
EmanuelFeru 4fbf2549c9 Cruise Control update
- added support for Cruise Control in HOVERCAR variant
- updated the shortBeep function, didn't like the beeping sound :)
2020-10-20 19:54:38 +02:00
EmanuelFeru 8369e4d47d Increased delay for CC
In Cruise Control (CC), the button can bounce. The beep delay is increased from 100ms to 200ms to prevent button bouncing and continuous activation/deactivation of CC.
2020-10-13 10:38:43 +02:00
EmanuelFeru dcdac4f6db Updated PWM variant
- fixed the setScopeChannel for PWM, to calibrate properly the limits
- improved the scaling
2020-07-20 19:36:24 +02:00
EmanuelFeru f2d86f3b30 Added functionality: Electric Brake, Standstill hold
- For TORQUE mode, by enabling `ELECTRIC_BRAKE_ENABLE` in `config.h`, the freewheeling amount can be adjusted using the `ELECTRIC_BRAKE_MAX` parameter.
- For VOLTAGE and TORQUE mode, the standstill hold functionality can be forced by enabling `STANDSTILL_HOLD_ENABLE` in `config.h`.

Known (minor) issue: There is a small "tick" noise when Stanstill is engaged/disengaged, due to the switching to SPEED mode. To be solved by an improved mode switching strategy in the future.
2020-07-19 11:24:37 +02:00
EmanuelFeru 17e127a8b7 PWM/PPM Left/Right, UART update
- created possiblity to use PWM, PPM input also on both LEFT and RIGHT cable (RIGHT cable is 5V tolerant)
- updated UART: disabled the Rx errors to avoid DMA stop and additional need to manage the UART error handler
- added Button support LEFT/RIGHT
2020-06-25 20:17:55 +02:00
EmanuelFeru 5f2eb196af Improved UART error recovery
- In case of an Rx error instead of stopping the complete UART, only the Rx DMA is aborted and restarted.
2020-06-23 19:58:36 +02:00
EmanuelFeru e46dff590f Major UART communication improvement
- the UART communication is improved based on UART Idle line detection interrupt
- an Rx ring buffer is used to manage the UART incoming data
- both Tx and Rx are efficiently handled using DMA

#45 #64 #65

Other:
- minor visual improvements
2020-06-21 23:14:46 +02:00
EmanuelFeru 38574153f0 Added deadband for PPM signal
Issue #29
2020-03-24 20:36:19 +01:00
EmanuelFeru c099bec824 RC pwm signal read fixes
Re-work on the RC pwm input signal timeout
2020-03-23 21:09:17 +01:00
EmanuelFeru 72e6b30033 UART with sideboards works + major refactoring
► the mainboard can now send and receive Serial data from the sideboards
► heavy refactored the `main.c`. It was becoming too large to manage... Therefore, `util.c` and `util.h` was created
► added new functionality for `VARIANT_HOVERCAR` and variants with `CONTROL_ADC` in general:
- ADC limits auto-calibration mode (long press of the power button) - calibration will not be lost at power-off
- Max Current and Max Speed adjustment mode (long press followed by a short press of the power button) - calibration will not be lost at power-off
- added one sideboard functionality:
         - LEDs are used to display battery level,  Motor Enable, Errors, Reverse driving, Braking.
         - Photo sensors are used as push buttons: One for changing Control Mode, One for Activating/Deactivating the Field Weakening on the fly
2020-03-01 10:00:26 +01:00