hoverboard-firmware-hack-fo.../Inc/defines.h

232 lines
6.9 KiB
C
Raw Normal View History

2019-10-06 13:09:15 +00:00
/*
* This file is part of the hoverboard-firmware-hack project.
*
* Copyright (C) 2017-2018 Rene Hopf <renehopf@mac.com>
* Copyright (C) 2017-2018 Nico Stute <crinq@crinq.de>
* Copyright (C) 2017-2018 Niklas Fauth <niklas.fauth@kit.fail>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// Define to prevent recursive inclusion
#ifndef DEFINES_H
#define DEFINES_H
2019-10-06 13:09:15 +00:00
#include "stm32f1xx_hal.h"
#include "config.h"
2019-10-06 13:09:15 +00:00
#define LEFT_HALL_U_PIN GPIO_PIN_5
#define LEFT_HALL_V_PIN GPIO_PIN_6
#define LEFT_HALL_W_PIN GPIO_PIN_7
#define LEFT_HALL_U_PORT GPIOB
#define LEFT_HALL_V_PORT GPIOB
#define LEFT_HALL_W_PORT GPIOB
#define RIGHT_HALL_U_PIN GPIO_PIN_10
#define RIGHT_HALL_V_PIN GPIO_PIN_11
#define RIGHT_HALL_W_PIN GPIO_PIN_12
#define RIGHT_HALL_U_PORT GPIOC
#define RIGHT_HALL_V_PORT GPIOC
#define RIGHT_HALL_W_PORT GPIOC
#define LEFT_TIM TIM8
#define LEFT_TIM_U CCR1
#define LEFT_TIM_UH_PIN GPIO_PIN_6
#define LEFT_TIM_UH_PORT GPIOC
#define LEFT_TIM_UL_PIN GPIO_PIN_7
#define LEFT_TIM_UL_PORT GPIOA
#define LEFT_TIM_V CCR2
#define LEFT_TIM_VH_PIN GPIO_PIN_7
#define LEFT_TIM_VH_PORT GPIOC
#define LEFT_TIM_VL_PIN GPIO_PIN_0
#define LEFT_TIM_VL_PORT GPIOB
#define LEFT_TIM_W CCR3
#define LEFT_TIM_WH_PIN GPIO_PIN_8
#define LEFT_TIM_WH_PORT GPIOC
#define LEFT_TIM_WL_PIN GPIO_PIN_1
#define LEFT_TIM_WL_PORT GPIOB
#define RIGHT_TIM TIM1
#define RIGHT_TIM_U CCR1
#define RIGHT_TIM_UH_PIN GPIO_PIN_8
#define RIGHT_TIM_UH_PORT GPIOA
#define RIGHT_TIM_UL_PIN GPIO_PIN_13
#define RIGHT_TIM_UL_PORT GPIOB
#define RIGHT_TIM_V CCR2
#define RIGHT_TIM_VH_PIN GPIO_PIN_9
#define RIGHT_TIM_VH_PORT GPIOA
#define RIGHT_TIM_VL_PIN GPIO_PIN_14
#define RIGHT_TIM_VL_PORT GPIOB
#define RIGHT_TIM_W CCR3
#define RIGHT_TIM_WH_PIN GPIO_PIN_10
#define RIGHT_TIM_WH_PORT GPIOA
#define RIGHT_TIM_WL_PIN GPIO_PIN_15
#define RIGHT_TIM_WL_PORT GPIOB
// #define LEFT_DC_CUR_ADC ADC1
// #define LEFT_U_CUR_ADC ADC1
// #define LEFT_V_CUR_ADC ADC1
#define LEFT_DC_CUR_PIN GPIO_PIN_0
#define LEFT_U_CUR_PIN GPIO_PIN_0
#define LEFT_V_CUR_PIN GPIO_PIN_3
#define LEFT_DC_CUR_PORT GPIOC
#define LEFT_U_CUR_PORT GPIOA
#define LEFT_V_CUR_PORT GPIOC
// #define RIGHT_DC_CUR_ADC ADC2
// #define RIGHT_U_CUR_ADC ADC2
// #define RIGHT_V_CUR_ADC ADC2
#define RIGHT_DC_CUR_PIN GPIO_PIN_1
#define RIGHT_U_CUR_PIN GPIO_PIN_4
#define RIGHT_V_CUR_PIN GPIO_PIN_5
#define RIGHT_DC_CUR_PORT GPIOC
#define RIGHT_U_CUR_PORT GPIOC
#define RIGHT_V_CUR_PORT GPIOC
// #define DCLINK_ADC ADC3
// #define DCLINK_CHANNEL
#define DCLINK_PIN GPIO_PIN_2
#define DCLINK_PORT GPIOC
// #define DCLINK_PULLUP 30000
// #define DCLINK_PULLDOWN 1000
#define LED_PIN GPIO_PIN_2
#define LED_PORT GPIOB
#define BUZZER_PIN GPIO_PIN_4
#define BUZZER_PORT GPIOA
#define SWITCH_PIN GPIO_PIN_1
#define SWITCH_PORT GPIOA
#define OFF_PIN GPIO_PIN_5
#define OFF_PORT GPIOA
#define BUTTON_PIN GPIO_PIN_1
#define BUTTON_PORT GPIOA
#define CHARGER_PIN GPIO_PIN_12
#define CHARGER_PORT GPIOA
#if defined(CONTROL_PPM_LEFT)
#define PPM_PIN GPIO_PIN_3
#define PPM_PORT GPIOA
#elif defined(CONTROL_PPM_RIGHT)
#define PPM_PIN GPIO_PIN_11
#define PPM_PORT GPIOB
#endif
#if defined(CONTROL_PWM_LEFT)
#define PWM_PIN_CH1 GPIO_PIN_2
#define PWM_PORT_CH1 GPIOA
#define PWM_PIN_CH2 GPIO_PIN_3
#define PWM_PORT_CH2 GPIOA
#elif defined(CONTROL_PWM_RIGHT)
#define PWM_PIN_CH1 GPIO_PIN_10
#define PWM_PORT_CH1 GPIOB
#define PWM_PIN_CH2 GPIO_PIN_11
#define PWM_PORT_CH2 GPIOB
#endif
#if defined(SUPPORT_BUTTONS_LEFT)
#define BUTTON1_PIN GPIO_PIN_2
#define BUTTON1_PORT GPIOA
#define BUTTON2_PIN GPIO_PIN_3
#define BUTTON2_PORT GPIOA
#elif defined(SUPPORT_BUTTONS_RIGHT)
#define BUTTON1_PIN GPIO_PIN_10
#define BUTTON1_PORT GPIOB
#define BUTTON2_PIN GPIO_PIN_11
#define BUTTON2_PORT GPIOB
#endif
2020-03-24 18:57:08 +00:00
2019-10-06 13:09:15 +00:00
#define DELAY_TIM_FREQUENCY_US 1000000
#define MILLI_R (R * 1000)
#define MILLI_PSI (PSI * 1000)
#define MILLI_V (V * 1000)
#define NO 0
#define YES 1
2019-10-12 17:51:31 +00:00
#define ABS(a) (((a) < 0) ? -(a) : (a))
2019-10-06 13:09:15 +00:00
#define LIMIT(x, lowhigh) (((x) > (lowhigh)) ? (lowhigh) : (((x) < (-lowhigh)) ? (-lowhigh) : (x)))
#define SAT(x, lowhigh) (((x) > (lowhigh)) ? (1.0f) : (((x) < (-lowhigh)) ? (-1.0f) : (0.0f)))
#define SAT2(x, low, high) (((x) > (high)) ? (1.0f) : (((x) < (low)) ? (-1.0f) : (0.0f)))
#define STEP(from, to, step) (((from) < (to)) ? (MIN((from) + (step), (to))) : (MAX((from) - (step), (to))))
#define DEG(a) ((a)*M_PI / 180.0f)
#define RAD(a) ((a)*180.0f / M_PI)
#define SIGN(a) (((a) < 0) ? (-1) : (((a) > 0) ? (1) : (0)))
2019-10-06 13:09:15 +00:00
#define CLAMP(x, low, high) (((x) > (high)) ? (high) : (((x) < (low)) ? (low) : (x)))
2020-03-24 18:57:08 +00:00
#define IN_RANGE(x, low, high) (((x) >= (low)) && ((x) <= (high)))
2019-10-06 13:09:15 +00:00
#define SCALE(value, high, max) MIN(MAX(((max) - (value)) / ((max) - (high)), 0.0f), 1.0f)
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#define MIN3(a, b, c) MIN(a, MIN(b, c))
#define MAX3(a, b, c) MAX(a, MAX(b, c))
#define ARRAY_LEN(x) (uint32_t)(sizeof(x) / sizeof(*(x)))
2020-10-31 20:14:15 +00:00
#define MAP(x, in_min, in_max, out_min, out_max) (((((x) - (in_min)) * ((out_max) - (out_min))) / ((in_max) - (in_min))) + (out_min))
2020-10-27 18:22:23 +00:00
2019-10-06 13:09:15 +00:00
typedef struct {
uint16_t dcr;
uint16_t dcl;
uint16_t rlA;
uint16_t rlB;
uint16_t rrB;
uint16_t rrC;
2019-10-06 13:09:15 +00:00
uint16_t batt1;
uint16_t l_tx2;
uint16_t temp;
uint16_t l_rx2;
} adc_buf_t;
// Define I2C, Nunchuk, PPM, PWM functions
2019-12-14 12:57:44 +00:00
void I2C_Init(void);
2020-01-18 00:05:06 +00:00
void Nunchuk_Init(void);
void Nunchuk_Read(void);
uint8_t Nunchuk_Ping(void);
void PPM_Init(void);
void PPM_ISR_Callback(void);
void PWM_Init(void);
2020-03-24 18:57:08 +00:00
void PWM_ISR_CH1_Callback(void);
void PWM_ISR_CH2_Callback(void);
// Sideboard definitions
#define LED1_SET (0x01)
#define LED2_SET (0x02)
#define LED3_SET (0x04)
#define LED4_SET (0x08)
#define LED5_SET (0x10)
#define SENSOR1_SET (0x01)
#define SENSOR2_SET (0x02)
#define SENSOR_MPU (0x04)
// RC iBUS switch definitions. Flysky FS-i6S has SW1, SW4 - 2 positions; SW2, SW3 - 3 positions
#define SW1_SET (0x0100) // 0000 0001 0000 0000
#define SW2_SET1 (0x0200) // 0000 0010 0000 0000
#define SW2_SET2 (0x0400) // 0000 0100 0000 0000
#define SW3_SET1 (0x0800) // 0000 1000 0000 0000
#define SW3_SET2 (0x1000) // 0001 0000 0000 0000
#define SW4_SET (0x2000) // 0010 0000 0000 0000
#endif // DEFINES_H