starcalc
/
flm01
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

avr: include SPI_FORWARD_TO_CTRL_PORT source/destination routing tag

This commit is contained in:
Bart Van Der Meerssche 2010-08-07 23:29:15 +02:00
parent ffcc35e107
commit e508f18806
2 changed files with 16 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
mote/v2/avr/basiciotest.c
View File

@ -37,13 +37,14 @@
#define SPI_END_OF_TX 0x00
#define SPI_END_OF_MESSAGE ':'
#define SPI_FORWARD_TO_UART_PORT 'u'
#define SPI_FORWARD_TO_CTRL_PORT 'l'
#define SPI_FORWARD_TO_CTRL_PORT 'l' // 'l'ocal port
volatile uint8_t high_hex;
volatile uint8_t spi_status;
uint8_t htoi(uint16_t hex) {
// hex to binary/byte decoding
uint8_t htob(uint16_t hex) {
uint8_t low_hex = (uint8_t) hex;
uint8_t high_hex = (uint8_t) (hex >> 8);
uint8_t byte;
@ -54,7 +55,8 @@ uint8_t htoi(uint16_t hex) {
return byte;
}
uint16_t itoh(uint8_t byte) {
// binary/byte to hex encoding
uint16_t btoh(uint8_t byte) {
uint8_t low_nibble = (byte & 0x0F);
uint8_t high_nibble = (byte & 0xF0) >> 4;
uint16_t hex;
@ -69,12 +71,13 @@ uint16_t itoh(uint8_t byte) {
SIGNAL(SPI_STC_vect) {
uint8_t spi_rx, spi_tx, uart_tx;
// the SPI is double-buffered, requiring two NO_OPs when switching from Tx to Rx
if (spi_status & (NO_OP_1 | NO_OP_2)) {
spi_status--;
return;
}
// are we in transmit mode?
// are we in Tx mode?
if (spi_status & TRANSMIT) {
if (spi_status & TO_FROM_UART) {
@ -94,7 +97,7 @@ SIGNAL(SPI_STC_vect) {
return;
}
// switch (spi_rx = received_from_spi(ctrlGetFromTxBuffer())) {
// we're in Rx mode
switch (spi_rx = received_from_spi(0x00)) {
case SPI_END_OF_TX:
spi_status |= TRANSMIT;
@ -113,11 +116,14 @@ SIGNAL(SPI_STC_vect) {
case SPI_FORWARD_TO_UART_PORT:
spi_status |= TO_FROM_UART;
break;
case SPI_FORWARD_TO_CTRL_PORT:
spi_status &= ~TO_FROM_UART;
break;
default:
//check whether the incoming hex-encoded stream needs to be forwarded to the UART port
if (spi_status & TO_FROM_UART) {
if (spi_status & HIGH_HEX) {
uart_tx = htoi(((uint16_t)high_hex << 8) + spi_rx);
uart_tx = htob(((uint16_t)high_hex << 8) + spi_rx);
uartAddToTxBuffer(uart_tx);
}
else {
@ -151,7 +157,7 @@ int main(void) {
// check the HEX bit in spi_status
if (spi_status & HIGH_HEX) {
// loopback on the UART itf
send = itoh(htoi(((uint16_t)high_hex << 8) + data));
send = btoh(htob(((uint16_t)high_hex << 8) + data));
uartAddToTxBuffer((uint8_t)(send >> 8));
uartAddToTxBuffer((uint8_t)(send));
}

3
mote/v2/avr/ctrl.c
View File

@ -58,6 +58,9 @@ uint8_t ctrlAddToTxBuffer(uint8_t data) {
}
void ctrlLoop(void) {
// source routing
bufferAddToEnd(&ctrlTxBuffer, 'l');
while (ctrlRxBuffer.datalength) {
bufferAddToEnd(&ctrlTxBuffer, bufferGetFromFront(&ctrlRxBuffer));
}