add sensoresp5

platformio.ini

@@ -12,11 +12,12 @@
 
 [platformio]
 #For Config upload comment in data_dir line and flash with platformio run -t uploadfs --environment sensorespx
-data_dir=data_sensoresp0
+#data_dir=data_sensoresp0
 #data_dir=data_sensoresp1
 #data_dir=data_sensoresp2
 #data_dir=data_sensoresp3
 #data_dir=data_sensoresp4
+data_dir=data_sensoresp5
 
 
 #Outdoor
@@ -205,3 +206,35 @@ lib_deps =
     Homie@3.0.0
 
 
+#Kueche
+[env:sensoresp5]
+platform = espressif8266
+board = d1_mini
+framework = arduino
+
+monitor_port = /dev/ttyUSB0
+monitor_speed = 115200
+
+build_flags =
+    -D SENSOR_DHT22
+    -D DHTPIN=D7
+    -D dataDHT22_temperature_minchange=0.2
+    -D dataDHT22_humidity_minchange=1.0
+
+    -D SENSOR_PIR
+    -D PIRPIN=D0
+    -D dataPIR_readdelay=100
+    -D dataPIR_senddelaymax=1000*60*10
+
+    -D SENSOR_BH1750
+    -D dataBH1750_minchange=10.0
+    -D dataBH1750_senddelaymax=1000*60*2
+
+
+lib_deps =
+    adafruit/DHT sensor library@1.3.10
+    claws/BH1750@1.1.4
+    ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error
+    Homie@3.0.0
+
+

src/main.cpp

@@ -66,7 +66,7 @@ struct sensordata
   //SCL=D1, SDA=D2
   #include <Wire.h>
   #include <BH1750.h>
-  BH1750 lightMeter(0x23);
+  BH1750 lightMeter(0x23); //0x23 if addr connected to ground (=pin open), 0x5c if addr pulled high
   bool bh1750init_ok=false;
   sensordata dataBH1750;
   float value_lightBH1750=0;
@@ -84,6 +84,7 @@ struct sensordata
 #ifdef SENSOR_PIR
 // PIR Sensors HC-SR501 (modified to put out shortest pulse time short pins 5 and 6 of ic)
  //pir sensor needs 5v through an inductor for filtering. output level is 3.3v
+ //hc-sr501 should also be a few cm away from the esp. interference can cause false triggering
   sensordata dataPIR;
   bool value_PIR=false;
 #endif
@@ -175,6 +176,7 @@ struct sensordata
   //#include "Adafruit_TCS34725.h"
   #include "tcs34725_agc.h" //class code from example  https://github.com/adafruit/Adafruit_TCS34725/blob/master/examples/tcs34725autorange/tcs34725autorange.ino
   //Connect SCL to D1, SDA to D2, GND and 3v3
+  //Maximum measurable light is around 20k Lux. (direct sunlight is easily above 20k Lux)
   //Adafruit_TCS34725 tcs = Adafruit_TCS34725(TCS34725_INTEGRATIONTIME_700MS, TCS34725_GAIN_1X);  //initializer from standart class
   tcs34725 tcs; //wrapper class with agc
   bool tcs34725init_ok=false;

src/tcs34725_agc.cpp

@@ -1,3 +1,5 @@
+#ifdef SENSOR_TCS34725
+
 //#include <Wire.h>
 //#include "Adafruit_TCS34725.h"
 #include "tcs34725_agc.h"
@@ -82,4 +84,6 @@ void tcs34725::getData(void) {
 
   lux = (TCS34725_R_Coef * float(r_comp) + TCS34725_G_Coef * float(g_comp) + TCS34725_B_Coef * float(b_comp)) / cpl;
   ct = TCS34725_CT_Coef * float(b_comp) / float(r_comp) + TCS34725_CT_Offset;
-}
+}
+
+#endif

src/tcs34725_agc.h

@@ -1,4 +1,5 @@
 //copied from example code: https://github.com/adafruit/Adafruit_TCS34725/blob/master/examples/tcs34725autorange/tcs34725autorange.ino
+#ifdef SENSOR_TCS34725
 
 #ifndef _TCS34725_AGC_H_
 #define _TCS34725_AGC_H_
@@ -45,4 +46,6 @@ public:
   float cratio, cpl, ct, lux, maxlux;
 };
 
+#endif
+
 #endif