move mhz19 to class (calibration topic missing)
This commit is contained in:
parent
53471a9c8a
commit
1693a84cf3
|
@ -18,8 +18,9 @@ void Sensor_LDR::init() //Things to be done during setup()
|
|||
}
|
||||
|
||||
//Also called during setup()
|
||||
void Sensor_LDR::setSettings(unsigned long senddelaymax, unsigned long readdelay)
|
||||
void Sensor_LDR::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
|
||||
{
|
||||
data.minchange=minchange;
|
||||
data.senddelaymax=senddelaymax;
|
||||
data.readdelay=readdelay;
|
||||
}
|
||||
|
|
|
@ -21,9 +21,11 @@ private:
|
|||
|
||||
|
||||
//wemos d1 mini, black wire of ldr connects to A0 with 10k to gnd. red wire connects with 1k to gnd and 2k2 to 3v3
|
||||
#ifdef SENSOR_LDR_CALIB_1
|
||||
#define LDRARRAYSIZE 18
|
||||
const unsigned int out_ldr[18] = {0, 30, 50, 60, 130, 170, 250, 420, 780, 1300,2600, 5000, 5350, 7700, 10900, 12000, 17000,20000}; // x10 (i.e. gets later divided by 10)
|
||||
const unsigned int in_ldr[18] = {0, 12, 100, 150, 350, 400, 450, 650, 730, 780, 840, 930, 948 , 970, 993, 1005, 1019, 1023}; // 0 - 1023
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
@ -33,7 +35,7 @@ public:
|
|||
|
||||
|
||||
void init();
|
||||
void setSettings(unsigned long senddelaymax, unsigned long readdelay);
|
||||
void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
|
||||
void advertise(HomieNode& p_sensorNode);
|
||||
void sensorloop();
|
||||
|
||||
|
|
|
@ -0,0 +1,169 @@
|
|||
#include "sensor_mhz19b.h"
|
||||
|
||||
|
||||
|
||||
Sensor_MHZ19B::Sensor_MHZ19B(int prx,int ptx)
|
||||
{
|
||||
pin_rx=prx;
|
||||
pin_tx=ptx;
|
||||
|
||||
/*
|
||||
* MHZ19 Library: https://platformio.org/lib/show/1620/SevSegSPI
|
||||
* Software Serial Library: https://platformio.org/lib/show/168/EspSoftwareSerial
|
||||
|
||||
*/
|
||||
// SW Serial
|
||||
//SW Serial RX: to mhz19 tx (green cable)
|
||||
//SW Serial TX: to mhz19 rx (blue cable)
|
||||
//co2 sensor needs 5v. Maybe better to Connect USB 5V directly (not through wemos d1 onboard diode which gives only 4.7V! at '5V' output)
|
||||
|
||||
//if ABC is disabled (see in setup function) sensor should be calibrated manually. leave outdoors (=400ppm) with no direct sunlight for >20min, then connect HD pin to GND for at least 7 seconds.
|
||||
/* Pinout (view from top, connector at the bottom)
|
||||
* Vin, GND, NC, PWM
|
||||
* | | | |
|
||||
* /-----------------\
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* \-----------------/
|
||||
* | | | | |
|
||||
* Vo Rx Tx NC HD
|
||||
*
|
||||
* [Connector]
|
||||
*/
|
||||
|
||||
//value will be in [ppm]
|
||||
}
|
||||
|
||||
void Sensor_MHZ19B::init() //Things to be done during setup()
|
||||
{
|
||||
Serial.println("initializing MHZ19B");
|
||||
mhz19_swSerial->begin(BAUD_RATE_MHZ19, SWSERIAL_8N1, pin_rx, pin_tx, false, 256);
|
||||
mhz19->setSerial(mhz19_swSerial);
|
||||
|
||||
uint8_t mhz19abctries=10;
|
||||
while(!mhz19->disableABC() && mhz19abctries>0) { //disable automatic baseline correction (abc does calibration every 24h -> needs to have 400ppm co2 level sometime during that time)
|
||||
delay(500); //wait some time for mhz to be initialized
|
||||
Serial.print("disableABC Failed! try="); Serial.println(mhz19abctries);
|
||||
mhz19abctries--;
|
||||
}
|
||||
if (mhz19abctries>0) {
|
||||
Serial.println("mhz19 abc disabled successfully");
|
||||
init_ok=true;
|
||||
}
|
||||
}
|
||||
|
||||
//Also called during setup()
|
||||
void Sensor_MHZ19B::setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay)
|
||||
{
|
||||
data.minchange=minchange;
|
||||
data.senddelaymax=senddelaymax;
|
||||
data.readdelay=readdelay;
|
||||
}
|
||||
|
||||
|
||||
bool Sensor_MHZ19B::mhz19calibrationHandler(const HomieRange& range, const String& value) {
|
||||
if (range.isRange) {
|
||||
return false; //if range is given but index is not in allowed range
|
||||
}
|
||||
Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
|
||||
|
||||
if (value=="zero") {
|
||||
mhz19->calibrateZero();
|
||||
Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
|
||||
#ifdef STATUSNODE
|
||||
sensorNode->setProperty("status").send("MHZ19 Zero Calibration triggered");
|
||||
#endif
|
||||
} else {
|
||||
Homie.getLogger() << "Value outside range" << endl;
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
//Called during setup
|
||||
void Sensor_MHZ19B::advertise(HomieNode& p_sensorNode)
|
||||
{
|
||||
sensorNode = &p_sensorNode;
|
||||
sensorNode->advertise("co2");
|
||||
#ifdef MHZ19CALIBRATIONTOPIC
|
||||
sensorNode->advertise("mhz19calibration").settable(&Sensor_MHZ19B::mhz19calibrationHandler)); //not working!!! TODO: Fix it
|
||||
#endif
|
||||
}
|
||||
|
||||
void Sensor_MHZ19B::sensorloop()
|
||||
{
|
||||
if (init_ok) {
|
||||
sensordata &d=data;
|
||||
|
||||
bool _changed=false;
|
||||
if (millis() >= (d.lastreadtime+d.readdelay)) {
|
||||
mhz19_ready=mhz19->isReady();
|
||||
//d.value=mhz19->readValue(); //[ppm]
|
||||
d.value=mhz19_readValue_reimplemented(mhz19_swSerial, mhz19); //[ppm] reimplemented function to fix no response issue
|
||||
Homie.getLogger() << "read co2 " << ": " << d.value << " status=" << mhz19_ready << endl;
|
||||
if (fabs(d.lastsentvalue-d.value)>=d.minchange){
|
||||
_changed=true;
|
||||
}
|
||||
d.lastreadtime=millis();
|
||||
}
|
||||
|
||||
if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
|
||||
Serial.print("Sending MHZ19. reason=");
|
||||
if (_changed) Serial.println("change"); else Serial.println("time");
|
||||
|
||||
Homie.getLogger() << "co2 " << ": " << d.value << endl;
|
||||
if (mhz19_ready){ //send no co2 values if not warmed up. can take several miniutes
|
||||
sensorNode->setProperty("co2").send(String(d.value));
|
||||
}else{
|
||||
Homie.getLogger() << "co2 not ready. didnt sent" << endl;
|
||||
}
|
||||
|
||||
d.lastsentvalue=d.value;
|
||||
|
||||
d.lastsent=millis();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
byte Sensor_MHZ19B::mhz19_getCheckSum(byte* packet) {
|
||||
byte checksum = 0;
|
||||
for(uint8_t i = 1; i < 8; i++) {
|
||||
checksum += packet[i];
|
||||
}
|
||||
checksum = 0xff - checksum;
|
||||
checksum += 1;
|
||||
return checksum;
|
||||
}
|
||||
|
||||
int Sensor_MHZ19B::mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz19Ref) { //same function as in mhz19 library from klevytskyi, but with delay between cmd send and response check
|
||||
byte CMD_READ[9] = {0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79}; // Read command
|
||||
unsigned int co2 = -1;
|
||||
unsigned char response[9];
|
||||
_streamRef->write(CMD_READ, 9);
|
||||
|
||||
unsigned long _startwait=millis();
|
||||
while (millis()-_startwait<100) { //wait for mhz19 to send response
|
||||
//wait
|
||||
}
|
||||
|
||||
if (_streamRef->available()) {
|
||||
_streamRef->readBytes(response, 9);
|
||||
|
||||
byte crc = mhz19_getCheckSum(response);
|
||||
|
||||
if (response[0] == 0xFF && response[1] == CMD_READ[2] && response[8] == crc) {
|
||||
unsigned int responseHigh = (unsigned int) response[2];
|
||||
unsigned int responseLow = (unsigned int) response[3];
|
||||
unsigned int ppm = (256*responseHigh) + responseLow;
|
||||
co2 = ppm;
|
||||
}
|
||||
}
|
||||
|
||||
return co2;
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
#ifndef SENSOR_MHZ19B_H
|
||||
#define SENSOR_MHZ19B_H
|
||||
|
||||
#include "sensordata.h"
|
||||
#include <Homie.h>
|
||||
|
||||
|
||||
#include <SoftwareSerial.h>
|
||||
#include <MHZ19.h>
|
||||
|
||||
|
||||
class Sensor_MHZ19B
|
||||
{
|
||||
|
||||
private:
|
||||
HomieNode *sensorNode; //reference to HomieNode
|
||||
|
||||
struct sensordata data; //struct values are changed in setup()
|
||||
|
||||
int pin_rx;
|
||||
int pin_tx;
|
||||
|
||||
bool init_ok;
|
||||
|
||||
int mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz19Ref);
|
||||
byte mhz19_getCheckSum(byte* packet);
|
||||
|
||||
|
||||
bool mhz19_ready;
|
||||
|
||||
MHZ19 *mhz19;
|
||||
SoftwareSerial *mhz19_swSerial;
|
||||
#define BAUD_RATE_MHZ19 9600
|
||||
|
||||
|
||||
|
||||
//#define MHZ19CALIBRATIONTOPIC //TODO: fix it
|
||||
|
||||
public:
|
||||
Sensor_MHZ19B(int prx, int ptx);
|
||||
|
||||
void init();
|
||||
void setSettings(float minchange, unsigned long senddelaymax, unsigned long readdelay);
|
||||
void advertise(HomieNode& p_sensorNode);
|
||||
void sensorloop();
|
||||
|
||||
bool mhz19calibrationHandler(const HomieRange& range, const String& value);
|
||||
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -91,6 +91,7 @@ build_flags =
|
|||
|
||||
-D SENSOR_LDR
|
||||
-D SENSOR_LDR_PIN=A0
|
||||
-D SENSOR_LDR_CALIB_1
|
||||
|
||||
|
||||
lib_deps =
|
||||
|
@ -120,10 +121,9 @@ build_flags =
|
|||
-D SENSOR_HCSR501_PIN=D6
|
||||
|
||||
-D SENSOR_LDR
|
||||
-D SENSOR_LDR_CALIB1
|
||||
-D SENSOR_LDR_CALIB_1
|
||||
-D SENSOR_LDR_PIN=A0
|
||||
-D SENSOR_LDR_minchange=10.0
|
||||
-D SENSOR_LDR_readdelay=1000*2
|
||||
-D SENSOR_LDR_senddelaymax=1000*60*1
|
||||
|
||||
|
||||
|
@ -144,11 +144,11 @@ monitor_port = /dev/ttyUSB0
|
|||
monitor_speed = 115200
|
||||
|
||||
build_flags =
|
||||
-D SENSOR_MHZ19
|
||||
-D MHZ19_SERIAL_RX=D5
|
||||
-D MHZ19_SERIAL_TX=D6
|
||||
-D dataMHZ19_minchange=10
|
||||
-D dataMHZ19_readdelay=10*1000
|
||||
-D SENSOR_MHZ19B
|
||||
-D SENSOR_MHZ19B_SERIAL_RX=D5
|
||||
-D SENSOR_MHZ19B_SERIAL_TX=D6
|
||||
-D SENSOR_MHZ19B_minchange=10
|
||||
-D SENSOR_MHZ19B_readdelay=10*1000
|
||||
|
||||
-D SENSOR_SDS018
|
||||
-D SDS018_SERIAL_RX=D7
|
||||
|
@ -203,7 +203,7 @@ monitor_speed = 115200
|
|||
|
||||
build_flags =
|
||||
-D SENSOR_DHT22
|
||||
-D DHTPIN=D7
|
||||
-D SENSOR_DHT22_PIN=D7
|
||||
-D dataDHT22_temperature_minchange=0.2
|
||||
-D dataDHT22_humidity_minchange=1.0
|
||||
|
||||
|
@ -214,11 +214,11 @@ build_flags =
|
|||
-D dataBH1750_minchange=10.0
|
||||
-D dataBH1750_senddelaymax=1000*60*2
|
||||
|
||||
-D SENSOR_MHZ19
|
||||
-D MHZ19_SERIAL_RX=D5
|
||||
-D MHZ19_SERIAL_TX=D6
|
||||
-D dataMHZ19_minchange=10
|
||||
-D dataMHZ19_readdelay=10*1000
|
||||
-D SENSOR_MHZ19B
|
||||
-D SENSOR_MHZ19B_SERIAL_RX=D5
|
||||
-D SENSOR_MHZ19B_SERIAL_TX=D6
|
||||
-D SENSOR_MHZ19B_minchange=10
|
||||
-D SENSOR_MHZ19B_readdelay=10*1000
|
||||
|
||||
lib_deps =
|
||||
adafruit/DHT sensor library@1.3.10
|
||||
|
|
204
src/main.cpp
204
src/main.cpp
|
@ -188,54 +188,18 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
struct sensordata dataMHZ19;
|
||||
/*
|
||||
* MHZ19 Library: https://platformio.org/lib/show/1620/SevSegSPI
|
||||
* Software Serial Library: https://platformio.org/lib/show/168/EspSoftwareSerial
|
||||
#ifdef SENSOR_MHZ19B
|
||||
#include "sensor_mhz19b.cpp"
|
||||
Sensor_MHZ19B sensor_mhz19b(SENSOR_MHZ19B_SERIAL_RX,SENSOR_MHZ19B_SERIAL_TX);
|
||||
|
||||
*/
|
||||
// SW Serial
|
||||
//SW Serial RX: to mhz19 tx (green cable)
|
||||
//SW Serial TX: to mhz19 rx (blue cable)
|
||||
//co2 sensor needs 5v. Maybe better to Connect USB 5V directly (not through wemos d1 onboard diode which gives only 4.7V! at '5V' output)
|
||||
|
||||
//if ABC is disabled (see in setup function) sensor should be calibrated manually. leave outdoors (=400ppm) with no direct sunlight for >20min, then connect HD pin to GND for at least 7 seconds.
|
||||
/* Pinout (view from top, connector at the bottom)
|
||||
* Vin, GND, NC, PWM
|
||||
* | | | |
|
||||
* /-----------------\
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* \-----------------/
|
||||
* | | | | |
|
||||
* Vo Rx Tx NC HD
|
||||
*
|
||||
* [Connector]
|
||||
*/
|
||||
|
||||
|
||||
#ifndef SOFTWARESERIAL_H
|
||||
#include <SoftwareSerial.h>
|
||||
#define SOFTWARESERIAL_H
|
||||
#ifndef SENSOR_MHZ19B_minchange
|
||||
#define SENSOR_MHZ19B_minchange 10.0
|
||||
#endif
|
||||
|
||||
SoftwareSerial mhz19_swSerial;
|
||||
#define BAUD_RATE_MHZ19 9600
|
||||
|
||||
#define MHZ19CALIBRATIONTOPIC
|
||||
|
||||
#include <MHZ19.h>
|
||||
MHZ19 mhz19;
|
||||
bool mhz19_ready=false;
|
||||
int value_co2=-1; //[ppm]
|
||||
|
||||
int mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz19Ref); //declare function
|
||||
|
||||
#ifdef MHZ19CALIBRATIONTOPIC
|
||||
bool mhz19calibrationHandler(const HomieRange& range, const String& value);
|
||||
#ifndef SENSOR_MHZ19B_senddelaymax
|
||||
#define SENSOR_MHZ19B_senddelaymax 1000*60*10
|
||||
#endif
|
||||
#ifndef SENSOR_MHZ19B_readdelay
|
||||
#define SENSOR_MHZ19B_readdelay 1000*10
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
@ -409,31 +373,12 @@ void setup() {
|
|||
|
||||
#ifdef SENSOR_LDR
|
||||
sensor_ldr.init();
|
||||
sensor_ldr.setSettings(SENSOR_RADAR_senddelaymax,SENSOR_RADAR_readdelay);
|
||||
sensor_ldr.setSettings(SENSOR_LDR_minchange,SENSOR_LDR_senddelaymax,SENSOR_LDR_readdelay);
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
Serial.println("initializing mhz19");
|
||||
#ifdef dataMHZ19_minchange
|
||||
dataMHZ19.minchange=dataMHZ19_minchange;
|
||||
#endif
|
||||
#ifdef dataMHZ19_readdelay
|
||||
dataMHZ19.readdelay=dataMHZ19_readdelay;
|
||||
#endif
|
||||
|
||||
mhz19_swSerial.begin(BAUD_RATE_MHZ19, SWSERIAL_8N1, MHZ19_SERIAL_RX, MHZ19_SERIAL_TX, false, 256);
|
||||
mhz19.setSerial(&mhz19_swSerial);
|
||||
|
||||
uint8_t mhz19abctries=10;
|
||||
while(!mhz19.disableABC() && mhz19abctries>0) { //disable automatic baseline correction (abc does calibration every 24h -> needs to have 400ppm co2 level sometime during that time)
|
||||
delay(500); //wait some time for mhz to be initialized
|
||||
Serial.print("disableABC Failed! try="); Serial.println(mhz19abctries);
|
||||
mhz19abctries--;
|
||||
}
|
||||
if (mhz19abctries>0) {
|
||||
Serial.println("mhz19 abc disabled successfully");
|
||||
}
|
||||
|
||||
#ifdef SENSOR_MHZ19B
|
||||
sensor_mhz19b.init();
|
||||
sensor_mhz19b.setSettings(SENSOR_MHZ19B_minchange,SENSOR_MHZ19B_senddelaymax,SENSOR_MHZ19B_readdelay);
|
||||
#endif
|
||||
|
||||
|
||||
|
@ -566,17 +511,8 @@ void setup() {
|
|||
sensor_ldr.advertise(sensorNode);
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
sensorNode.advertise("co2");
|
||||
#ifdef MHZ19CALIBRATIONTOPIC
|
||||
sensorNode.advertise("mhz19calibration").settable(mhz19calibrationHandler);
|
||||
#endif
|
||||
#ifdef SENSOR_MHZ19B
|
||||
sensor_mhz19b.advertise(sensorNode);
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_SDS018
|
||||
|
@ -619,42 +555,6 @@ void loop() {
|
|||
Homie.loop();
|
||||
}
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
void loop_MHZ19()
|
||||
{
|
||||
sensordata &d=dataMHZ19;
|
||||
|
||||
bool _changed=false;
|
||||
if (millis() >= (d.lastreadtime+d.readdelay)) {
|
||||
mhz19_ready=mhz19.isReady();
|
||||
//value_co2=mhz19.readValue(); //[ppm]
|
||||
value_co2=mhz19_readValue_reimplemented(&mhz19_swSerial, &mhz19); //[ppm] reimplemented function to fix no response issue
|
||||
Homie.getLogger() << "read co2 " << ": " << value_co2 << " status=" << mhz19_ready << endl;
|
||||
if (fabs(d.lastsentvalue-value_co2)>=d.minchange){
|
||||
_changed=true;
|
||||
}
|
||||
d.lastreadtime=millis();
|
||||
}
|
||||
|
||||
if (_changed || millis() >= (d.lastsent+d.senddelaymax)) {
|
||||
Serial.print("Sending MHZ19. reason=");
|
||||
if (_changed) Serial.println("change"); else Serial.println("time");
|
||||
checkESPStatus();
|
||||
|
||||
Homie.getLogger() << "co2 " << ": " << value_co2 << endl;
|
||||
if (mhz19_ready){ //send no co2 values if not warmed up. can take several miniutes
|
||||
sensorNode.setProperty("co2").send(String(value_co2));
|
||||
}else{
|
||||
Homie.getLogger() << "co2 not ready. didnt sent" << endl;
|
||||
}
|
||||
|
||||
d.lastsentvalue=value_co2;
|
||||
|
||||
d.lastsent=millis();
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_SDS018
|
||||
void loop_SDS018_pm25()
|
||||
{
|
||||
|
@ -1010,11 +910,8 @@ void loopHandler() {
|
|||
sensor_ldr.sensorloop();
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
loop_MHZ19();
|
||||
#ifdef SENSOR_MHZ19B
|
||||
sensor_mhz19b.sensorloop();
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_SDS018
|
||||
|
@ -1055,46 +952,6 @@ void checkESPStatus()
|
|||
}
|
||||
|
||||
|
||||
|
||||
#ifdef SENSOR_MHZ19
|
||||
byte mhz19_getCheckSum(byte* packet) {
|
||||
byte checksum = 0;
|
||||
for(uint8_t i = 1; i < 8; i++) {
|
||||
checksum += packet[i];
|
||||
}
|
||||
checksum = 0xff - checksum;
|
||||
checksum += 1;
|
||||
return checksum;
|
||||
}
|
||||
|
||||
int mhz19_readValue_reimplemented(Stream *_streamRef, MHZ19 *_mhz19Ref) { //same function as in mhz19 library from klevytskyi, but with delay between cmd send and response check
|
||||
byte CMD_READ[9] = {0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79}; // Read command
|
||||
unsigned int co2 = -1;
|
||||
unsigned char response[9];
|
||||
_streamRef->write(CMD_READ, 9);
|
||||
|
||||
unsigned long _startwait=millis();
|
||||
while (millis()-_startwait<100) { //wait for mhz19 to send response
|
||||
//wait
|
||||
}
|
||||
|
||||
if (_streamRef->available()) {
|
||||
_streamRef->readBytes(response, 9);
|
||||
|
||||
byte crc = mhz19_getCheckSum(response);
|
||||
|
||||
if (response[0] == 0xFF && response[1] == CMD_READ[2] && response[8] == crc) {
|
||||
unsigned int responseHigh = (unsigned int) response[2];
|
||||
unsigned int responseLow = (unsigned int) response[3];
|
||||
unsigned int ppm = (256*responseHigh) + responseLow;
|
||||
co2 = ppm;
|
||||
}
|
||||
}
|
||||
|
||||
return co2;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef SENSOR_SDS018
|
||||
void readSDS018()
|
||||
{
|
||||
|
@ -1164,31 +1021,6 @@ void ICACHE_RAM_ATTR interrupt_raingauge()
|
|||
#endif
|
||||
|
||||
|
||||
/* #################################
|
||||
* ########### topic handler #######
|
||||
*/
|
||||
|
||||
#ifdef MHZ19CALIBRATIONTOPIC
|
||||
bool mhz19calibrationHandler(const HomieRange& range, const String& value) {
|
||||
if (range.isRange) {
|
||||
return false; //if range is given but index is not in allowed range
|
||||
}
|
||||
Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
|
||||
|
||||
if (value=="zero") {
|
||||
mhz19.calibrateZero();
|
||||
Homie.getLogger() << "mhz19 calibration " << ": " << value << endl;
|
||||
#ifdef STATUSNODE
|
||||
sensorNode.setProperty("status").send("MHZ19 Zero Calibration triggered");
|
||||
#endif
|
||||
} else {
|
||||
Homie.getLogger() << "Value outside range" << endl;
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/*##################################
|
||||
|
|
Loading…
Reference in New Issue