add homie and weight filter functions

platformio.ini

@@ -18,3 +18,4 @@ monitor_speed= 115200
 
 lib_deps =
     bogde/HX711 @ 0.7.4
+    Homie@3.0.0

src/main.cpp

@@ -1,4 +1,14 @@
-#include<Arduino.h>
+#include <Arduino.h>
+#include <Homie.h>
+
+
+/*
+ * Wemos d1 mini
+ * Flash Size: 4M (1M SPIFFS)
+ */
+
+//Upload config: platformio run --target uploadfs
+
 
 #include "HX711.h"
 
@@ -6,10 +16,63 @@
 const int LOADCELL_DOUT_PIN = D2;
 const int LOADCELL_SCK_PIN = D3;
 
+const int PIN_SELFENABLE = D1;
+
 HX711 scale;
 
+#define MEASURE_INTERVAL 100 //ms
+#define READING_FILTER_SIZE 40 //latency is about READING_FILTER_SIZE/2*MEASURE_INTERVAL
+float weight_read[READING_FILTER_SIZE] = {0};
+uint8_t weight_read_pos=0;
+#define MEANVALUECOUNT 4 //0<= meanvaluecount < READING_FILTER_SIZE/2
+
+float weight_tare=0; //minimal filtered weight
+#define MIN_WEIGHT_DIFFERENCE 50 //minimum weight
+float weight_max=0; //max filtered weight
+
+bool weight_sent=false;
+unsigned long weight_sent_time=0;
+
+#define MAXONTIME 60000*2 //turn off after ms
+
+#define FW_NAME "scale"
+#define FW_VERSION "0.0.1"
+
+void loopHandler();
+
+HomieNode scaleNode("weight", "Scale", "scale"); //paramters: topic, $name, $type
+
+int sort_desc(const void *cmp1, const void *cmp2);
+float getFilteredWeight();
+float getWeightSpread();
+void sendWeight(float w);
+
+
 void setup() {
+  pinMode(PIN_SELFENABLE,OUTPUT);
+  digitalWrite(PIN_SELFENABLE, HIGH);
+  pinMode(LED_BUILTIN,OUTPUT);
+  digitalWrite(LED_BUILTIN, HIGH);
+
   Serial.begin(115200);
+
+  Homie.disableResetTrigger(); //disable config reset if pin 1 (D3) is low on startup
+
+
+  Homie_setFirmware(FW_NAME, FW_VERSION);
+  Homie_setBrand(FW_NAME);
+  Homie.setLoopFunction(loopHandler);
+
+  scaleNode.advertise("human");
+  scaleNode.advertise("spread");
+  scaleNode.advertise("raw");
+  scaleNode.advertise("max");
+
+  
+
+  Homie.setup();
+
+
   scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
 
 
@@ -61,11 +124,78 @@ void setup() {
 }
 
 void loop() {
+  Homie.loop();  
+}
 
-  Serial.print("reading:\t");
-  Serial.println(scale.get_units(10));
 
-  delay(100);
+void loopHandler() {
+  unsigned long loopmillis=millis();
+ 
+  static unsigned long last_measure=0;
+  if (loopmillis>last_measure+MEASURE_INTERVAL) {
+    last_measure=loopmillis;
+
+    Serial.print("reading=");
+    float weight_current=0;
+    if (scale.wait_ready_timeout(1000)) { //for non blocking mode      
+      weight_read_pos++;
+      weight_read_pos%=READING_FILTER_SIZE;
+      weight_current=scale.get_units(1);
+      weight_read[weight_read_pos]=weight_current; //one reading takes 91ms
+    } else {
+        Serial.println("HX711 not found.");
+    }
+      
+    float weight_filtered=getFilteredWeight();
+    float spread=getWeightSpread();
+
+    Serial.println(weight_current);
+    Serial.print("spread="); Serial.println(spread,3);
+
+    char charBuf[10];
+    dtostrf(weight_current,4, 3, charBuf);
+    scaleNode.setProperty("raw").send(charBuf);
+
+    dtostrf(spread,4, 3, charBuf);
+    scaleNode.setProperty("spread").send(charBuf);
+    
+    
+
+    #define MAXSPREAD_TARE 0.1 //in kg, for tare can be lower than for measuring
+    if (spread<MAXSPREAD_TARE) { //if reading is stable
+      if (weight_filtered<weight_tare) { //new min
+        weight_tare=weight_filtered; 
+        Serial.print("new tare="); Serial.println(weight_tare,3);
+      }
+    }
+    #define MAXSPREAD_MEASURE 0.5 //in kg
+    if (spread<MAXSPREAD_MEASURE) { //if reading is stable
+      if (weight_filtered>weight_max) { //new max
+        weight_max=weight_filtered; 
+        Serial.print("new max="); Serial.println(weight_max,3);
+      }
+    }
+
+    dtostrf(weight_max-weight_tare,4, 3, charBuf);
+    scaleNode.setProperty("max").send(charBuf); //filtered and auto tared
+
+    if (!weight_sent) {
+      if (weight_max-weight_tare>MIN_WEIGHT_DIFFERENCE) {
+        sendWeight(weight_max-weight_tare);
+      }
+    }
+    
+
+  }
+
+  #define STAYONTIME_AFTER_SENT 5000
+  if (millis() > MAXONTIME || (weight_sent && millis()>weight_sent_time+STAYONTIME_AFTER_SENT)) {
+    Serial.println("Turning Off");
+    Serial.flush();
+    delay(100);
+    digitalWrite(PIN_SELFENABLE, LOW);
+  }
+
 
   /*
   scale.power_down();			        // put the ADC in sleep mode
@@ -73,3 +203,54 @@ void loop() {
   scale.power_up();*/
   
 }
+
+int sort_desc(const void *cmp1, const void *cmp2) //compare function for qsort
+{
+  float a = *((float *)cmp1);
+  float b = *((float *)cmp2);
+  return a > b ? -1 : (a < b ? 1 : 0);
+}
+
+float getFilteredWeight() {
+  float copied_values[READING_FILTER_SIZE];
+  for(int i=0;i<READING_FILTER_SIZE;i++) {
+    copied_values[i] = weight_read[i]; //TODO: maybe some value filtering/selection here
+  }
+  float copied_values_length = sizeof(copied_values) / sizeof(copied_values[0]);
+  qsort(copied_values, copied_values_length, sizeof(copied_values[0]), sort_desc);
+
+  float mean=copied_values[READING_FILTER_SIZE/2];
+  for (uint8_t i=1; i<=MEANVALUECOUNT;i++) {
+    mean+=copied_values[READING_FILTER_SIZE/2-i]+copied_values[READING_FILTER_SIZE/2+i]; //add two values around center
+  }
+  mean/=(1+MEANVALUECOUNT*2);
+
+  return mean;
+}
+
+float getWeightSpread() { //absolute difference between lowest and highest value in buffer
+  float copied_values[READING_FILTER_SIZE];
+  for(int i=0;i<READING_FILTER_SIZE;i++) {
+    copied_values[i] = weight_read[i]; //TODO: maybe some value filtering/selection here
+  }
+  float copied_values_length = sizeof(copied_values) / sizeof(copied_values[0]);
+  qsort(copied_values, copied_values_length, sizeof(copied_values[0]), sort_desc);
+
+  float diff=copied_values[0]-copied_values[READING_FILTER_SIZE-1];
+
+  if (diff<0) { //abs for float
+    diff*=-1;
+  }
+  return diff;
+}
+
+
+
+void sendWeight(float w) {
+  char charBuf[10];
+  dtostrf(w,4, 3, charBuf);
+  scaleNode.setProperty("human").send(charBuf);
+  weight_sent=true;
+  weight_sent_time=millis();
+  Serial.print("Weight sent="); Serial.println(w,3);
+}