Fixed bug in scanner display, thanks to David Bath. Also upgraded to latest Jam toolchain and moved pins over to the new GettingStarted defaults.

This commit is contained in:
maniacbug 2011-11-28 21:23:38 -08:00
parent d4371639e6
commit 5726c1622a
2 changed files with 191 additions and 187 deletions

View File

@ -1,206 +1,210 @@
PROJECT_NAME = $(PWD:B) ;
PROJECT_DIR = . ;
PROJECT_LIBS = SPI RF24 ;
# (1) Project Information
OUT_DIR = ojam ;
F_CPU = 16000000 ;
MCU = atmega328p ;
PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ;
PROJECT_LIBS = SPI RF24 ;
UPLOAD_RATE = 57600 ;
AVRDUDE_PROTOCOL = stk500v1 ;
COM = 33 ;
# (2) Board Information
UPLOAD_PROTOCOL ?= stk500v1 ;
UPLOAD_SPEED ?= 57600 ;
MCU ?= atmega328p ;
F_CPU ?= 16000000 ;
CORE ?= arduino ;
VARIANT ?= standard ;
ARDUINO_VERSION ?= 100 ;
# (3) USB Ports
PORTS = p4 p6 p9 u0 u1 u2 ;
PORT_p6 = /dev/tty.usbserial-A600eHIs ;
PORT_p4 = /dev/tty.usbserial-A40081RP ;
PORT_p9 = /dev/tty.usbserial-A9007LmI ;
PORT_u0 = /dev/ttyUSB0 ;
PORT_u1 = /dev/ttyUSB1 ;
PORT_u2 = /dev/ttyUSB2 ;
# (4) Location of AVR tools
#
# This configuration assumes using avr-tools that were obtained separate from the Arduino
# distribution.
# Host-specific overrides for locations
if $(OS) = MACOSX
{
ARDUINO_VERSION = 22 ;
OLD_DIR = /opt/arduino-0021 ;
AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ;
AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ;
ARDUINO_DIR = /opt/Arduino ;
ARDUINO_AVR = /usr/lib/avr/include ;
AVR_BIN = /usr/local/avrtools/bin ;
AVR_ETC = /usr/local/avrtools/etc ;
AVR_INCLUDE = /usr/local/avrtools/include ;
}
else
{
AVR_BIN = /usr/bin ;
AVR_INCLUDE = /usr/lib/avr/include ;
AVR_ETC = /etc ;
}
# Where is everything?
ARDUINO_VERSION ?= 22 ;
AVR_TOOLS_PATH ?= /usr/bin ;
ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ;
ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ;
AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ;
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ;
# (5) Directories where Arduino core and libraries are located
ARDUINO_DIR ?= /opt/Arduino ;
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ;
ARDUINO_LIB = $(ARDUINO_DIR)/libraries ;
SKETCH_LIB = $(HOME)/Source/Arduino/libraries ;
AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ;
AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ;
AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ;
AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ;
AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ;
DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
CTUNING = -ffunction-sections -fdata-sections ;
CXXTUNING = -fno-exceptions -fno-strict-aliasing ;
CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ;
CXXFLAGS = $(CFLAGS) $(CXXTUNING) ;
LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ;
#
# --------------------------------------------------
# Below this line usually never needs to be modified
#
# Tool locations
CC = $(AVR_BIN)/avr-gcc ;
C++ = $(AVR_BIN)/avr-g++ ;
LINK = $(AVR_BIN)/avr-gcc ;
OBJCOPY = $(AVR_BIN)/avr-objcopy ;
AVRDUDE = $(AVR_BIN)/avrdude ;
# Flags
DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
OPTIM = -Os ;
CCFLAGS = -Wall -Wextra -mmcu=$(MCU) -ffunction-sections -fdata-sections ;
C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ;
LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ;
AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ;
# Search everywhere for headers
HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ;
HDRS = $(PWD) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ;
# Output locations
LOCATE_TARGET = $(F_CPU) ;
LOCATE_SOURCE = $(F_CPU) ;
#
# Custom rules
#
rule GitVersion
{
Always $(<) ;
Depends all : $(<) ;
}
actions GitVersion
{
echo "const char program_version[] = \"\\" > $(<)
git log -1 --pretty=format:%h >> $(<)
echo "\";" >> $(<)
}
GitVersion version.h ;
rule Pde
{
Depends $(<) : $(>) ;
MakeLocate $(<) : $(LOCATE_SOURCE) ;
Clean clean : $(<) ;
}
if ( $(ARDUINO_VERSION) < 100 )
{
ARDUINO_H = WProgram.h ;
}
else
{
ARDUINO_H = Arduino.h ;
}
actions Pde
{
echo "#include <$(ARDUINO_H)>" > $(<)
echo "#line 1 \"$(>)\"" >> $(<)
cat $(>) >> $(<)
}
rule C++Pde
{
local _CPP = $(>:B).cpp ;
Pde $(_CPP) : $(>) ;
C++ $(<) : $(_CPP) ;
}
rule UserObject
{
switch $(>:S)
{
case .ino : C++Pde $(<) : $(>) ;
case .pde : C++Pde $(<) : $(>) ;
}
}
rule Objects
{
local _i ;
for _i in [ FGristFiles $(<) ]
{
local _b = $(_i:B)$(SUFOBJ) ;
local _o = $(_b:G=$(SOURCE_GRIST:E)) ;
Object $(_o) : $(_i) ;
Depends obj : $(_o) ;
}
}
rule Main
{
MainFromObjects $(<) : $(>:B)$(SUFOBJ) ;
Objects $(>) ;
}
rule Hex
{
Depends $(<) : $(>) ;
MakeLocate $(<) : $(LOCATE_TARGET) ;
Depends hex : $(<) ;
Clean clean : $(<) ;
}
actions Hex
{
$(OBJCOPY) -O ihex -R .eeprom $(>) $(<)
}
rule Upload
{
Depends $(1) : $(2) ;
Depends $(2) : $(3) ;
NotFile $(1) ;
Always $(1) ;
Always $(2) ;
UploadAction $(2) : $(3) ;
}
actions UploadAction
{
$(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
}
#
# Targets
#
# Grab everything from the core directory
CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ;
# Grab everything from libraries. To avoid this "grab everything" behaviour, you
# can specify specific modules to pick up in PROJECT_MODULES
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ;
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ;
# In addition to explicitly-specified program modules, pick up anything from the current
# dir.
PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ;
# Grab everything from the current dir
PROJECT_MODULES += [ GLOB $(PWD) : *.c *.cpp *.pde *.ino ] ;
# Shortcut for the out files
OUT = $(OUT_DIR)/$(PROJECT_NAME) ;
# Main output executable
MAIN = $(PWD:B).elf ;
# AvrDude setup
AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ;
Main $(MAIN) : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ;
Hex $(MAIN:B).hex : $(MAIN) ;
rule GitVersion
# Upload targets
for _p in $(PORTS)
{
Always $(<) ;
Depends all : $(<) ;
Upload $(_p) : $(PORT_$(_p)) : $(MAIN:B).hex ;
}
actions GitVersion
{
echo "const char program_version[] = \"\\" > $(<)
git log -1 --pretty=format:%h >> $(<)
echo "\";" >> $(<)
}
GitVersion version.h ;
rule AvrCc
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Clean clean : $(<) ;
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
}
actions AvrCc
{
$(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>)
}
rule AvrC++
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Clean clean : $(<) ;
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
}
actions AvrC++
{
$(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>)
}
rule Pde
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Clean clean : $(<) ;
}
actions Pde
{
echo "#include <WProgram.h>" > $(<)
echo "#line 1 \"$(>)\"" >> $(<)
cat $(>) >> $(<)
}
rule AvrPde
{
local _CPP = $(OUT_DIR)/$(_I:B).cpp ;
Pde $(_CPP) : $(>) ;
AvrC++ $(<) : $(_CPP) ;
}
rule AvrObject
{
switch $(>:S)
{
case .c : AvrCc $(<) : $(>) ;
case .cpp : AvrC++ $(<) : $(>) ;
case .pde : AvrPde $(<) : $(>) ;
}
}
rule AvrObjects
{
for _I in $(<)
{
AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ;
}
}
rule AvrMainFromObjects
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
MkDir $(<:D) ;
Depends all : $(<) ;
Clean clean : $(<) ;
}
actions AvrMainFromObjects
{
$(AVR_LD) $(LDFLAGS) -o $(<) $(>)
}
rule AvrMain
{
AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ;
AvrObjects $(>) ;
}
rule AvrHex
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Depends hex : $(<) ;
Clean clean : $(<) ;
}
actions AvrHex
{
$(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<)
}
rule AvrUpload
{
Depends $(1) : $(2) ;
Depends $(2) : $(3) ;
NotFile $(1) ;
Always $(1) ;
Always $(2) ;
AvrUploadAction $(2) : $(3) ;
}
actions AvrUploadAction
{
$(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
}
AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ;
AvrHex $(OUT).hex : $(OUT).elf ;
AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ;
AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ;
AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ;

View File

@ -29,14 +29,14 @@
// Set up nRF24L01 radio on SPI bus plus pins 8 & 9
RF24 radio(8,9);
RF24 radio(9,10);
//
// Channel info
//
const short num_channels = 128;
short values[num_channels];
const uint8_t num_channels = 128;
uint8_t values[num_channels];
//
// Setup
@ -84,12 +84,12 @@ void setup(void)
// Loop
//
const short num_reps = 100;
const int num_reps = 100;
void loop(void)
{
// Clear measurement values
memset(values,0,num_channels);
memset(values,0,sizeof(values));
// Scan all channels num_reps times
int rep_counter = num_reps;