lichtorgel for mqtt. only duration

.gitignore

@@ -1 +1,2 @@
 wificredentials.h
+config.json

lichtorgel_mqtt/lichtorgel_mqtt.ino

@@ -0,0 +1,199 @@
+//http://homieiot.github.io/homie-esp8266/docs/develop/configuration/json-configuration-file/
+//curl -X PUT http://homie.config/config -d @config.json --header "Content-Type: application/json"
+/*Example data/homie/config.json
+{
+"name": "geraet",
+"device_id": "geraet",
+"wifi": {
+"ssid": "blafoo",
+"password": "password"
+},
+"mqtt": {
+"host": "mqttbrokerhostname",
+"port": 1883,
+"auth": false
+},
+"ota": {
+"enabled": false
+}
+}
+ */
+
+//3M
+
+
+#include <Homie.h>
+#include <Adafruit_NeoPixel.h>
+#include <ArduinoOTA.h>
+
+HomieNode homieNode("lamp", "lamp"); //id, type
+
+
+#define PIN_SR_DATA      D5
+#define PIN_SR_LTCH      D6
+#define PIN_SR_CLOCK     D7
+
+#define OUTPUTS 6
+
+long lastTickMillis;
+
+uint8_t out[OUTPUTS];
+
+long lastChange=0;
+#define STANDBYTIME 5000 //time in ms after lamps switch off if nothing happened
+boolean standby=false;
+#define MAXONTIME 1000 //maximum time in ms a lamp should be turned on (for lampoffmillis value)
+
+long lampoffmillis[OUTPUTS]; //time (millis()) at which lamp should turn off
+uint16_t last_data=0;
+
+void setup()
+{
+  pinMode(PIN_SR_DATA, OUTPUT);
+  pinMode(PIN_SR_LTCH, OUTPUT);
+  pinMode(PIN_SR_CLOCK, OUTPUT);
+
+  shiftRelais(0);
+  
+  Serial.begin(115200);
+  Serial.println();
+
+  Homie_setFirmware("lichtorgel", "1.0.0");
+  Homie.setLoopFunction(loopHandler);
+
+  homieNode.advertiseRange("duration", 0, OUTPUTS - 1).settable(onSetLamp); // lichtorgel/lamp/duration_n/set
+
+  Homie.setup();
+  ArduinoOTA.setHostname("lichtorgel");
+  /*ArduinoOTA.onStart([]() {
+
+  });
+  ArduinoOTA.onEnd([]() {
+    
+  });
+  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
+    strip.setPixelColor(progress / (total / NUMPIXELS), strip.Color(100, 0, 0));
+    strip.show();
+  });*/
+  ArduinoOTA.begin();
+
+}
+
+
+void loop()
+{
+  Homie.loop();
+  ArduinoOTA.handle();
+}
+
+void loopHandler() {
+  long loopmillis=millis();
+  uint16_t data=0;
+  for (uint8_t i=0; i<OUTPUTS; i++){
+    if (lampoffmillis[i]>loopmillis){ //turn lamp on if offtime is above current time
+      data|=1<<i; //set bit
+    }
+  }
+  if (millis()-lastChange >=STANDBYTIME && !standby){
+    Serial.println("Standby");
+    data=0;
+    shiftRelais(0);
+    standby=true;
+  }
+  if (data!=last_data){ //output changed
+    shiftRelais(mapData(data));
+    printBinary(data);
+    lastChange=loopmillis;
+    last_data=data;
+  }
+
+  /*
+  int packetSize = Udp.parsePacket();
+  if (packetSize)
+  {
+    // receive incoming UDP packets
+    Serial.printf("Received %d bytes from %s, port %d\n", packetSize, Udp.remoteIP().toString().c_str(), Udp.remotePort());
+    int len = Udp.read(incomingPacket, 255);
+    if (len > 0)
+    {
+      incomingPacket[len] = 0;
+    }
+    uint16_t data=incomingPacket[0]<<8 | incomingPacket[1];
+    
+    Serial.printf("UDP packet contents: %s\n", incomingPacket);
+    
+    printBinary(data);
+    printBinary(mapData(data));
+    shiftRelais(mapData(data));
+
+    lastChange=millis();
+    standby=false;
+  }*/
+
+  
+  
+}
+
+void printBinary(uint16_t value){
+  for(int i = 15; i >=0; i--) {
+    Serial.print((value & (1 << ((byte)i) )) ? 1 : 0);
+    //Serial.print(!!(value & (1 << i))); //this should also work
+  }
+  Serial.println();
+}
+
+uint16_t mapData(uint16_t x){ //because shift register pinout is different from actual outlet connection numbering
+  uint16_t d=0;
+  d|=moveByte(x,0,1);
+  d|=moveByte(x,1,2);
+  d|=moveByte(x,2,3);
+  d|=moveByte(x,3,4);
+  d|=moveByte(x,4,5);
+  d|=moveByte(x,5,6);
+  d|=moveByte(x,6,7);
+  d|=moveByte(x,7,0);
+  return d;
+}
+
+uint16_t moveByte(uint16_t x,uint8_t from,uint8_t to){
+  //example: x=00110101 from=2 to=0  -> 00000001
+  return ((x&_BV(from))>0) ? _BV(to):0;
+}
+
+void shiftRelais(uint16_t data) {
+  digitalWrite(PIN_SR_LTCH, LOW);
+  shiftOut(PIN_SR_DATA, PIN_SR_CLOCK, MSBFIRST, (data >> 8));
+  shiftOut(PIN_SR_DATA, PIN_SR_CLOCK, MSBFIRST, data & 0xff);
+  digitalWrite(PIN_SR_LTCH, HIGH);
+}
+
+
+bool onSetLamp(const HomieRange& range, const String& value) { //lamp index (range) and on time (in ms)
+  standby=false;
+  lastChange=millis();
+  Serial.print("onSetLamp ");
+  Serial.print(range.index);
+  Serial.print(" value=");
+  Serial.println(value);
+  
+  if (!range.isRange) { 
+    //long set_offmillis=value.toInt());
+    //homieNode.setProperty("duration").send(value);
+    return false; //range must be specified
+  }
+  if (range.index < 0 || range.index >= OUTPUTS) { //out of range
+    return false;
+  }
+
+  long set_offmillis=value.toInt()+millis();
+  if (set_offmillis>millis()+MAXONTIME){
+    set_offmillis=millis()+MAXONTIME; //limit value
+  }
+  lampoffmillis[range.index]=set_offmillis;
+  Serial.print("lampoffmillis[");
+  Serial.print(range.index);
+  Serial.print("]=");
+  Serial.println(lampoffmillis[range.index]);
+
+  homieNode.setProperty("duration_" + String(range.index)).send(value);
+}