hydroponic-controller/platformio.ini

81 lines
2.4 KiB
INI

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env:esp32doit-devkit-v1_NFT]
platform = espressif32
board = esp32doit-devkit-v1
framework = arduino
monitor_speed = 115200
monitor_port = /dev/ttyUSB0
build_flags=
'-D CLIENT_ID="hydroponic-NFT"'
-D PIN_BUTTON=12
-D PIN_LED=13
-D EC_PIN_RELAY_PROBE=27
-D EC_PIN_FREQ=5
-D EC_CALIBRATION_POLYNOM={18.785904241636743,-0.04069178351449846,3.528797358514823e-05,-4.214254847500995e-09,2.543662736303669e-13}
-D EC_CALIBRATION_LINEARIZE_BELOW_ADC=2000
-D EC_CALIBRATION_LINEAR_LOWADC=728
-D EC_CALIBRATION_LINEAR_LOWEC=0
-D FLOW_PIN=16
-D ONE_WIRE_BUS_PIN=18
-D THERMOMETER_ADDR_RESERVOIR={0x28,0xFF,0x6F,0x19,0x72,0x16,0x05,0x44}
-D THERMOMETER_ADDR_CASE={0x10,0x7E,0x22,0x99,0x01,0x08,0x00,0xA4}
-D PIN_SDA=21
-D PIN_SCL=22
lib_deps =
https://github.com/milesburton/Arduino-Temperature-Control-Library/
https://github.com/emilv/ArduinoSort/
robtillaart/ADS1X15@^0.3.9
256dpi/MQTT@^2.5.1
pololu/VL53L0X@^1.3.1
[env:esp32-s3-devkitm-1_DB]
platform = platformio/espressif32@^6.7
board = esp32-s3-devkitm-1
;Devboard is ESP32-S3-DevKitC-1 (N16R8). board=esp32-s3-devkitm-1 works fine
framework = arduino
monitor_speed = 115200
build_flags=
'-D CLIENT_ID="hydroponic-Test"'
-D PIN_BUTTON=12
-D EC_PIN_RELAY_PROBE=6
-D EC_PIN_FREQ=5
-D EC_CALIBRATION_POLYNOM={8.718380956513695,-0.026463423062356713,3.425216464107108e-05,-4.069826379094172e-09,2.478900495960682e-13}
-D EC_CALIBRATION_LINEARIZE_BELOW_ADC=2000
-D EC_CALIBRATION_LINEAR_LOWADC=728
-D EC_CALIBRATION_LINEAR_LOWEC=0
-D FLOW_PIN=16
-D ONE_WIRE_BUS_PIN=18
-D THERMOMETER_ADDR_RESERVOIR={0x28,0xFF,0x30,0xBA,0x85,0x16,0x03,0xB5}
-D THERMOMETER_ADDR_CASE={0x28,0xFF,0x30,0xBA,0x85,0x16,0x03,0xB6}
-D PIN_SDA=1
-D PIN_SCL=2
lib_deps =
https://github.com/milesburton/Arduino-Temperature-Control-Library/
https://github.com/emilv/ArduinoSort/
robtillaart/ADS1X15@^0.3.9
256dpi/MQTT@^2.5.2
pololu/VL53L0X@^1.3.1
adafruit/Adafruit NeoPixel