interfisch
/
hoverboard-firmware-hack-foc-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

more CLI

This commit is contained in:
Kai Hauser 2020-02-27 12:07:49 +01:00 committed by GitHub
parent a6242cc3d6
commit e70b3aa38c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 22 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
README.md
View File

@ -125,7 +125,7 @@ Make sure you hold the powerbutton or connect a jumper to the power button pins
To build and flash choose one of the following methods:
### Method 1: Using Platformio
### Method 1: Using Platformio IDE
- open the folder in the IDE of choice (vscode or Atom)
- press the 'PlatformIO:Build' or the 'PlatformIO:Upload' button (bottom left in vscode).
@ -137,13 +137,17 @@ To build and flash choose one of the following methods:
- click Build Target (or press F7) to build the firmware
- click Load Code (or press F8) to flash the firmware.
### Method 3: Using Ubuntu
### Method 3: Using Linux CLI
- prerequisites: install [ST-Flash utility](https://github.com/texane/stlink).
- open a terminal in the repo check-out folder and type:
- open a terminal in the repo check-out folder and if you have definded the variant in [config.h](/Inc/config.h) type:
```
make
```
or you can set the variant like this
```
make -e VARIANT=VARIANT_NUNCHUK
```
- flash the firmware by typing:
```
make flash
@ -153,16 +157,22 @@ make flash
openocd -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -c flash "write_image erase build/hover.bin 0x8000000"
```
### Method 4: MacOS
### Method 4: MacOS CLI
- prerequisites: first get brew https://brew.sh
- then install stlink ST-Flash utility
#### Using Make
```
brew install stlink
```
- open a terminal in the repo check-out folder and type:
- open a terminal in the repo check-out folder and if you have definded the variant in [config.h](/Inc/config.h) type:
```
make
```
or you can set the variant like this
```
make -e VARIANT=VARIANT_####
```
If compiling fails because something is missing just install it with brew AND leave a comment to improve this howto or pull request ;-)
- flash the firmware by typing:
@ -174,7 +184,14 @@ make flash
make unlock
```
#### Using platformio CLI
```
brew install platformio
platformio run -e VARIANT_####
platformio run –target upload -e VARIANT_####
```
If you have set default_envs in [platformio.ini](/platformio.ini) you can ommit -e parameter
---
## Troubleshooting