add readme for hc12 and openlog notes
This commit is contained in:
parent
37d7d25773
commit
48ebf40656
|
@ -5,4 +5,30 @@ This processing software can display log information from the bobbycar in realim
|
|||
It is used alongside the controller_teensy firmware.
|
||||
Log information is constantly printed out on one serial interface and can be written either to an sd card or transmitted via rf or bluetooth.
|
||||
|
||||
![screenshot](Screenshot.png "Screenshot")
|
||||
![screenshot](Screenshot.png "Screenshot")
|
||||
|
||||
|
||||
## OpenLog
|
||||
|
||||
Tutorial for OpenLog Serial SD Card logger: https://learn.sparkfun.com/tutorials/openlog-hookup-guide/configuration-file
|
||||
|
||||
Only works reliable on 3v3.
|
||||
Using 5v restarts occur (prints 12> over serial and everytime a new file is created).
|
||||
|
||||
|
||||
my CONFIG.TXT content:
|
||||
115200,26,3,0,1,1,0
|
||||
baud,escape,esc#,mode,verb,echo,ignoreRX
|
||||
|
||||
|
||||
## HC12 433MHz Module
|
||||
5v or 3v3.
|
||||
Bridge Set pin to ground and power up to enter setup mode.
|
||||
Use Arduino IDE to send commands via serial terminal with 9600 Baud.
|
||||
AT+RX shows current settings.
|
||||
|
||||
Use following commands to setup:
|
||||
AT+B115200
|
||||
AT+C002
|
||||
|
||||
Using channel 2 instead of 1, because 1 receive didnt work with two computers.
|
||||
|
|
Loading…
Reference in New Issue