interfisch
/
blinds_motorcontrol
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

implement up down movement with sense print

This commit is contained in:
interfisch 2021-01-31 13:45:28 +01:00
parent 8b9434e306
commit 90e160228f
1 changed files with 74 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

74
src/main.cpp
View File

@ -6,6 +6,33 @@
//follow firmware flash guide for new wemos motor shield v1.0 https://github.com/thomasfredericks/wemos_motor_shield
#define BUTTON_DEBOUNCE 200
#define PIN_BUTTON D5
unsigned long last_pin_button=0;
bool pin_button_down=0;
bool last_pin_button_down=0;
bool manual_drive_direction=false;
#define PIN_SENSE A0
unsigned long last_print=0;
#define SENSE_CLEAR_LOWER 40 //adc value lower limit for clear part. clear is around 70
#define SENSE_CLEAR_UPPER 100 //adc value upper limit for clear part
#define SENSE_OPAQUE_LOWER 600 //adc value lower limit for opaque part. opaque is around 675
#define SENSE_OPAQUE_UPPER 750 //adc value upper limit for opaque part
#define SENSE_END_LOWER 850 //adc value lower limit for end marker
#define SENSE_END_UPPER 1024 //adc value upper limit for end marker
//define directions for motors
#define _M1_UP = _CCW;
#define _M1_DOWN = _CW;
#define _M2_UP = _CCW;
#define _M2_DOWN = _CW;
int pwm;
//Motor shield default I2C Address: 0x30
//PWM frequency: 1000Hz(1kHz)
@ -19,9 +46,55 @@ void setup() {
Serial.begin(57600);
Serial.println("Starting demo");
pinMode(PIN_BUTTON, INPUT_PULLUP);
pinMode(PIN_SENSE, INPUT);
M1.setmotor(_STOP);
M2.setmotor(_STOP);
pwm=100;
}
void loop() {
if (millis() > last_pin_button + BUTTON_DEBOUNCE) {
bool new_pin_button_down=!digitalRead(PIN_BUTTON);
if (pin_button_down != new_pin_button_down) { //changed
pin_button_down = new_pin_button_down; //update
last_pin_button=millis(); //delay next check
}
}
if (pin_button_down) { //button currently pressed
if (last_pin_button_down!=pin_button_down) { //value changed. executed one time when entering if
if (manual_drive_direction) {
M1.setmotor( _CW, pwm);
Serial.print("CW PWM: ");
}else{
M1.setmotor( _CCW, pwm);
Serial.print("CCW PWM: ");
}
Serial.println(pwm);
manual_drive_direction=!manual_drive_direction; //switch direction every new press
}
}else{
if (last_pin_button_down!=pin_button_down) { //value changed
Serial.println("Motor STOP");
M1.setmotor(_STOP);
}
}
last_pin_button_down=pin_button_down;
if (millis() > last_print + 100) {
int sense=analogRead(PIN_SENSE);
Serial.println(sense);
last_print=millis();
}
}
/*
void loop() {
int pwm;
@ -59,3 +132,4 @@ void loop() {
delay(1000);
}
*/