separate button handling

controller/mixercontroller_w5100_pio/src/button.cpp

@@ -0,0 +1,50 @@
+#include "button.h"
+
+#define DEBOUNCETIME 20 //time to not check for inputs after key press
+#define BUTTONTIMEHOLD 750 //time for button hold
+#define BUTTONTIMEHOLDLONG 3000 //time for button long hold
+
+Button::Button() {
+
+}
+
+void Button::update(long millis, boolean state)
+{
+    //example: state=!digitalRead(PIN_BTNLEFT)
+    //Short press (true when button short pressed, on release)
+    _button=false;
+
+    //long press (true when button is held down for BUTTONTIMEHOLD, on time elapsed)
+    _button_hold=false;
+
+    if (millis-_millis_lastinput>DEBOUNCETIME) //Button debouncing
+    {
+        if (_timebuttonpressed == 0 && state){ //first time pressed down. (low when pressed)
+            _timebuttonpressed=millis; //set time of button press
+            _millis_lastinput=millis; //for debouncing
+        }else if(_timebuttonpressed != 0 && !state){ //button released (was pressed)
+            if (millis-_timebuttonpressed < BUTTONTIMEHOLD){ //short press
+                _button=true;
+            }
+            _timebuttonpressed=0; //re-enable after short press and release from hold
+            _millis_lastinput=millis; //for debouncing
+        }else if(millis-_timebuttonpressed >= BUTTONTIMEHOLD && _timebuttonpressed>0){ //held down long enough and not already hold triggered
+            _button_hold=true;
+            _timebuttonpressed=-1; //-1 as flag for hold triggered
+        }
+    }
+
+    if ( _button ) {
+        _millis_lastinput=millis; //for debouncing
+    }
+
+}
+
+boolean Button::buttonPressed()
+{
+    return _button;
+}
+boolean Button::buttonHold()
+{
+    return _button_hold;
+}

controller/mixercontroller_w5100_pio/src/button.h

@@ -0,0 +1,25 @@
+#ifndef BUTTON_H
+#define BUTTON_H
+
+#include <Arduino.h>
+
+class Button
+{
+  public:
+    Button();
+    void update(long millis, boolean state); //millis: current time, state: state of button
+    boolean buttonPressed(); //true (once after update) when button released and not hold down long enough
+    boolean buttonHold(); //true (once after update) when button held down for long enough.
+  private:
+    long _millis_lastinput;
+    long _timebuttonpressed;
+
+    //Short press (true when button short pressed, on release)
+    boolean _button=false;
+
+    //long press (true when button is held down for BUTTONTIMEHOLD, on time elapsed)
+    boolean _button_hold=false;
+
+};
+
+#endif

controller/mixercontroller_w5100_pio/src/main.cpp

@@ -1,9 +1,3 @@
-/*
- * TODO:
- * bestehende steuerung aus espcontroller übernehmen und testen
- * topics und handler implementieren
- */
-
 #include <Arduino.h>
 
 #include <Adafruit_NeoPixel.h>
@@ -11,6 +5,13 @@
   #include <avr/power.h>
 #endif
 
+void reconnect();
+uint32_t Wheel(byte WheelPos);
+boolean srRead(uint8_t pbit);
+void srWrite(uint8_t pbit, boolean state);
+void callback(char* topic, byte* payload, unsigned int length);
+void sendData();
+
 #define LEDPIN 9  //PB1 = D9 = Pin15
 Adafruit_NeoPixel leds = Adafruit_NeoPixel(9, LEDPIN, NEO_GRB + NEO_KHZ800);
 
@@ -38,10 +39,13 @@ long last_serialdebug=0;
 #define INTERVAL_SERIALDEBUG 200
 
 //Inputs
+#include "button.h"
+
 #define PIN_BUTTON A3 //A3 = PC3,  defining PCx as pin doesnt work
 #define PIN_ENCA A2 //A2 = PC2
 #define PIN_ENCB A1 //A1 = PC1
-#define BUTTON_RELEASE_DEBOUNCE 10 //minimum time after button release to reenable triggering
+
+Button button_knob;
 
 boolean button_flag=false; //true if button pressed
 boolean button_released=true;
@@ -100,6 +104,7 @@ uint8_t error=0;
 
 void setup() {
   pinMode(PIN_BUTTON,INPUT_PULLUP);
+  button_knob = Button();
 
   pinMode(PIN_POT,INPUT);
 
@@ -196,6 +201,7 @@ void loop() {
   
 
   //Serial Input ##############################################
+  /*For debugging
   while (Serial.available() > 0) {
     int _value = Serial.parseInt();
     if (Serial.read() == '\n') {
@@ -206,12 +212,13 @@ void loop() {
       srWrite(_value,!srRead(_value));
      
     }
-    
   }
+  */
 
   //Inputs ###################################################
   poti_read=poti_read*POTIFILTER + (1.0-POTIFILTER)*analogRead(PIN_POT); //read poti
   
+  /*
   if (!digitalRead(PIN_BUTTON)){ //button pressed
     if (button_released){
       button_released=false; //flag: not released
@@ -222,7 +229,21 @@ void loop() {
   }else if(!button_flag && !button_released){ //button released and flag has been cleared
     last_button_released=loopmillis;
     button_released=true;
+  }*/
+
+  button_knob.update(millis(),!digitalRead(PIN_BUTTON));
+  
+  if (button_knob.buttonPressed()){
+    Serial.println("Button Pressed");
+  }else if(button_knob.buttonHold()){
+    Serial.println("Button hold");
   }
+    
+  
+
+
+
+
 
   //Read Encoder to velocity "volEncVel"
   int volEncVel=0;
@@ -370,19 +391,19 @@ void callback(char* topic, byte* payload, unsigned int length) {
 
 
 
-void srWrite(uint8_t pin, boolean state){
+void srWrite(uint8_t pbit, boolean state){ //change bit to state
   if (state==true){
-    srbits |= 1UL << pin; //set bit
+    srbits |= 1UL << pbit; //set bit
   }else{
-    srbits &= ~(1UL << pin); //clear bit
+    srbits &= ~(1UL << pbit); //clear bit
   }
   digitalWrite(SRLATCH, LOW);
   shiftOut(SRDATA, SRCLOCK, MSBFIRST, srbits>>8);
   shiftOut(SRDATA, SRCLOCK, MSBFIRST, srbits);
   digitalWrite(SRLATCH, HIGH);
 }
-boolean srRead(uint8_t pin){
-  return (srbits >> pin) & 1U;
+boolean srRead(uint8_t pbit){ //get state at bit
+  return (srbits >> pbit) & 1U;
 }