cleaned up signals, and plot redraw in config mode

reflowctl/control_widgets.py

@@ -0,0 +1,20 @@
+# -*- coding: utf-8 -*-
+
+from PyQt4 import QtGui, QtCore
+
+class AddRemoveWidget(QtGui.QWidget):
+    def __init__(self, parent):
+        #super(AddRemoveWidget, self).__init__(parent)
+        QtGui.QWidget.__init__(self, parent)
+        self.add_button = QtGui.QPushButton(QtGui.QIcon.fromTheme("list-add"), "")
+        self.remove_button = QtGui.QPushButton(QtGui.QIcon.fromTheme("list-remove"), "")
+
+        sh = "QPushButton:disabled { background-color: #555555; }"
+        self.remove_button.setStyleSheet(sh)
+        self.add_button.setStyleSheet(sh)
+
+        self._layout = QtGui.QVBoxLayout(self)
+
+        self._layout.addWidget(self.add_button)
+        self._layout.addWidget(self.remove_button)
+        self._layout.addStretch(4)

reflowctl/edge_widget.py

@@ -0,0 +1,243 @@
+# -*- coding: utf-8 -*-
+
+from PyQt4 import QtGui, QtCore
+
+
+class Edge(QtCore.QObject):
+    def __init__(self, from_tl, to_tl, duration=None, rate=None):
+        super(Edge, self).__init__(None)
+        self.from_tl = from_tl
+        self.to_tl = to_tl
+        self.duration = duration
+        self.rate = rate
+
+    def contains(self, temp_level):
+        return (
+          (self.from_tl.temp < temp_level.temp < self.to_tl.temp) or
+          (self.from_tl.temp > temp_level.temp > self.to_tl.temp))
+
+    def has_from_tl(self, temp_level):
+        return self.from_tl == temp_level
+
+    def has_to_tl(self, temp_level):
+        return self.to_tl == temp_level
+
+    def __repr__(self):
+        return "Edge(%r, %r, %r, %r)" % (self.from_tl, self.to_tl, self.duration, self.rate)
+
+
+class EdgeModel(QtCore.QAbstractTableModel):
+    edge_changed = QtCore.pyqtSignal()
+
+    def __init__(self, parent):
+        super(EdgeModel, self).__init__(parent)
+        self.edges = list()
+        self.headerdata = [
+            u"From Temperature (°C)",
+            u"To Temperature (°C)",
+            u"Duration (s)",
+            u"Rate (°C/s)"]
+
+    def headerData(self, col, orientation, role):
+        if orientation == QtCore.Qt.Horizontal and role == QtCore.Qt.DisplayRole:
+            return QtCore.QVariant(self.headerdata[col])
+        return QtCore.QVariant()
+
+    def rowCount(self, parent):
+        return len(self.edges)
+
+    def columnCount(self, parent):
+        return 4
+
+    def data(self, index, role):
+        if not index.isValid():
+            return QtCore.QVariant()
+
+        col = index.column()
+        if role == QtCore.Qt.DisplayRole:
+            if col == 0:
+                return QtCore.QVariant(self.edges[index.row()].from_tl.name)
+            elif col == 1:
+                return QtCore.QVariant(self.edges[index.row()].to_tl.name)
+            elif col == 2:
+                return QtCore.QVariant(self.edges[index.row()].duration)
+            elif col == 3:
+                return QtCore.QVariant(self.edges[index.row()].rate)
+
+        if index.column() < 2 and role == QtCore.Qt.DecorationRole:
+            p = QtGui.QPixmap(10,10)
+            if col == 0:
+                p.fill(self.edges[index.row()].from_tl.color)
+            elif col == 1:
+                p.fill(self.edges[index.row()].to_tl.color)
+            return p
+
+        return QtCore.QVariant()
+
+    def flags(self, index):
+        if not index.isValid():
+            return 0
+        return QtCore.Qt.ItemFlags(QtCore.Qt.ItemIsEnabled | QtCore.Qt.ItemIsSelectable | QtCore.Qt.ItemIsEditable)
+
+    def setData(self, index, variant, role):
+        if index.isValid() and role == QtCore.Qt.EditRole:
+            col = index.column()
+            if col == 2:
+                self.edges[index.row()].duration = variant.toFloat()[0]
+            elif col == 3:
+                self.edges[index.row()].rate = variant.toFloat()[0]
+            self.edge_changed.emit()
+            return True
+        return False
+
+    def remove_edge(self, index):
+        tmp = self.edges[index]
+        del self.edges[index]
+        self.reset()
+        self.edge_changed.emit()
+        return tmp
+
+    def add_edge(self, index, edge):
+        self.edges.insert(index.row() + 1, edge)
+        self.reset()
+        self.edge_changed.emit()
+
+    def setTempLevels(self, edges):
+        assert isinstance(edges, list)
+        self.edges = edges
+        self.reset()
+
+    def clear(self):
+        self.edges = list()
+        self.reset()
+
+    def get_edge(self, ix):
+        return self.edges[ix]
+
+class EdgeWidget(QtGui.QWidget):
+    edge_changed = QtCore.pyqtSignal()
+    def __init__(self, name):
+        super(EdgeWidget, self).__init__()
+        self.name = name
+
+        self.edge_model = EdgeModel(self)
+
+        self.edge_view = QtGui.QTableView(self)
+        self.edge_view.setModel(self.edge_model)
+        self.edge_view.verticalHeader().setVisible(False)
+        self.edge_view.resizeColumnsToContents()
+        self.edge_view.horizontalHeader().setStretchLastSection(True)
+        self.edge_view.setSelectionBehavior(QtGui.QAbstractItemView.SelectRows)
+
+
+        h = QtGui.QHBoxLayout(self)
+        h.addWidget(self.edge_view)
+
+    def edge_picked(self, ix):
+        self.edge_view.setCurrentIndex(self.edge_model.index(ix, 0))
+
+    def setData(self, solder):
+        self.solder = solder
+        self.edge_model.setTempLevels(solder.edges)
+        self.edge_view.setCurrentIndex(self.edge_model.index(0,0))
+
+        self.connect(
+            self.edge_model,
+            QtCore.SIGNAL("edge_changed()"),
+            self._edge_changed)
+
+    def _edge_changed(self):
+        self.edge_changed.emit()
+
+    def make_closed(self):
+        first_edge = self.edge_model.edges[0]
+        last_edge = self.edge_model.edges[-1]
+        if not first_edge.from_tl == last_edge.to_tl:
+            self.edge_model.edges.append(Edge(last_edge.to_tl, first_edge.from_tl, None, -1))
+
+    def temp_level_removed(self, temp_level):
+        from_ix = None
+        to_ix = None
+        edges = self.edge_model.edges
+        end = len(edges)
+
+        def helper(start, end):
+            for i in xrange(start, end):
+                edge = edges[i]
+                if edge.from_tl == temp_level:
+                    return i
+
+        for ix, edge in enumerate(self.edge_model.edges):
+            if edge.to_tl == temp_level:
+                from_ix = ix
+                to_ix = helper(ix, end)
+
+        for i in range(to_ix, from_ix-1, -1):
+            self.edge_model.edges.pop(i)
+
+        self.edge_model.reset()
+
+    def temp_level_added(self, old_tl, new_tl):
+
+        new_edges = list()
+        ix = 0
+        batch = list()
+        #for edge in self.edge_model.edges:
+            #if edge.contains(new_tl):
+                #batch.append(edge)
+
+        #if not batch:
+        def find_in_to(edges):
+            for edge in edges:
+                if old_tl == edge.to_tl:
+                    yield edge
+
+        def find_in_from(edges):
+            for edge in edges:
+                if old_tl == edge.from_tl:
+                    yield edge
+
+        for edge in find_in_to(self.edge_model.edges):
+            batch.append(edge)
+            for return_edge in find_in_from(self.edge_model.edges[self.edge_model.edges.index(edge):]):
+                batch.append(return_edge)
+
+        for edge in batch:
+            if edge.from_tl == old_tl:
+                new_edge = Edge(new_tl, old_tl, None, -1)
+                ix = self.edge_model.edges.index(edge)
+                self.edge_model.edges.insert(ix, new_edge)
+            elif edge.to_tl == old_tl:
+                new_edge = Edge(old_tl, new_tl, None, 1)
+                ix = self.edge_model.edges.index(edge)
+                self.edge_model.edges.insert(ix+1, new_edge)
+
+        if not batch:
+            self.edge_model.edges.append(Edge(old_tl, new_tl, None, 1))
+
+        self.make_closed()
+        self.edge_model.reset()
+        self.edge_changed.emit()
+
+
+        #for edge in batch:
+            #if edge.from_tl < new_tl:
+                #duration = None if edge.duration is None else edge.duration / 2
+                #new_edge = Edge(new_tl, edge.to_tl, duration, edge.rate)
+                #edge.duration = duration
+                #edge.to_tl = new_tl
+                #ix = self.edge_model.edges.index(edge)
+                #self.edge_model.edges.insert(ix+1, new_edge)
+            #elif edge.from_tl > new_tl:
+                #duration = None if edge.duration is None else edge.duration / 2
+                #new_edge = Edge(new_tl, edge.to_tl, duration, edge.rate)
+                #edge.duration = duration
+                #edge.to_tl = new_tl
+                #ix = self.edge_model.edges.index(edge)
+                #self.edge_model.edges.insert(ix+1, new_edge)
+            #else:
+                #raise Exception("cannot make an edge")
+
+        #self.make_closed()
+        #self.edge_model.reset()
+        #self.edge_changed.emit()

reflowctl/plot.py

@@ -1,449 +0,0 @@
-# -*- coding: utf-8 -*-
-
-import os
-import pprint
-import random
-import sys
-import wx
-
-REFRESH_INTERVAL_MS = 1000
-
-import matplotlib
-matplotlib.use('WXAgg')
-import matplotlib.lines
-from matplotlib.figure import Figure
-from matplotlib.pyplot import legend
-from matplotlib.backends.backend_wxagg import \
-    FigureCanvasWxAgg as FigCanvas, \
-    NavigationToolbar2WxAgg as NavigationToolbar
-from matplotlib.path import Path
-import matplotlib.patches as patches
-import  wx.lib.buttons  as  buttons
-
-import numpy as np
-import pylab
-
-from Arduino_Monitor import SerialData as DataGen
-import Arduino_Monitor
-
-
-class GraphFrame(wx.Frame):
-    """ The main frame of the application
-    """
-    title = 'reflowctl gui'
-
-    def __init__(self):
-        wx.Frame.__init__(self, None, -1, self.title)
-
-        self.datagen = DataGen()
-        self.data = [self.datagen.next()]
-        self.started = False
-
-        self.profile = []
-        self.state = []
-        self.count = 0
-
-        self.create_menu()
-        self.create_status_bar()
-        self.create_main_panel()
-
-        self.redraw_timer = wx.Timer(self)
-        self.Bind(wx.EVT_TIMER, self.on_redraw_timer, self.redraw_timer)
-        self.redraw_timer.Start(REFRESH_INTERVAL_MS)
-
-
-    def create_menu(self):
-        self.menubar = wx.MenuBar()
-
-        menu_file = wx.Menu()
-        m_expt = menu_file.Append(-1, "&Save plot\tCtrl-S", "Save plot to file")
-        self.Bind(wx.EVT_MENU, self.on_save_plot, m_expt)
-        menu_file.AppendSeparator()
-        m_exit = menu_file.Append(-1, "E&xit\tCtrl-X", "Exit")
-        self.Bind(wx.EVT_MENU, self.on_exit, m_exit)
-
-        self.menubar.Append(menu_file, "&File")
-        self.SetMenuBar(self.menubar)
-
-    def create_main_panel(self):
-        self.panel = wx.Panel(self)
-
-        self.hbox1 = wx.BoxSizer(wx.HORIZONTAL)
-        self.init_profile()
-        self.init_log()
-        self.init_oven_status()
-        self.init_plot()
-        self.canvas = FigCanvas(self.panel, -1, self.fig)
-
-        self.recv_config_button = wx.Button(self.panel, -1, "Receive Config")
-        self.Bind(wx.EVT_BUTTON, self.on_recv_config_button, self.recv_config_button)
-
-        self.send_button = wx.Button(self.panel, -1, "Send Config")
-        self.Bind(wx.EVT_BUTTON, self.on_send_button, self.send_button)
-
-        self.start_button = buttons.GenToggleButton(self.panel, -1, "Start")
-        self.Bind(wx.EVT_BUTTON, self.on_start_button, self.start_button)
-
-        #self.on_bitmap = wx.Image('burn.png', wx.BITMAP_TYPE_PNG).Scale(32, 32, wx.IMAGE_QUALITY_HIGH).ConvertToBitmap()
-        #self.off_bitmap = wx.Image('unburn.png', wx.BITMAP_TYPE_PNG).ConvertToBitmap()
-
-
-        self.ctrls = wx.BoxSizer(wx.VERTICAL)
-        self.ctrls.Add(self.recv_config_button, border=5, flag=wx.ALL | wx.ALIGN_LEFT)
-        self.ctrls.Add(self.send_button, border=5, flag=wx.ALL | wx.ALIGN_LEFT)
-        self.ctrls.Add(self.start_button, border=5, flag=wx.ALL | wx.ALIGN_LEFT)
-        self.hbox1.Add(self.ctrls, border=5, flag=wx.ALL | wx.ALIGN_TOP)
-
-        self.vbox = wx.BoxSizer(wx.VERTICAL)
-        self.vbox.Add(self.hbox1, 0, flag=wx.ALIGN_LEFT | wx.ALL)
-        self.vbox.Add(self.canvas, 1, flag=wx.LEFT | wx.TOP | wx.GROW)
-        #self.vbox.Add(self.hbox1, 0, flag=wx.ALIGN_LEFT | wx.TOP)
-
-
-        self.panel.SetSizer(self.vbox)
-        self.vbox.Fit(self)
-
-    def profile_spin_changed(self, event):
-        print dir(event)
-
-
-    def add_profile_item(self, title, sizer, min_=1, max_=250):
-
-        mc = 8
-
-        item = wx.SpinCtrl(self.panel, -1, "", (30, 50))
-        item.SetRange(min_, max_)
-        item.SetValue(Arduino_Monitor.profile[self.count])
-
-        self.Bind(wx.EVT_SPIN, self.profile_spin_changed, item)
-
-        sizer.Add(wx.StaticText(self.panel, -1, title), (self.count, 0))
-        sizer.Add(item, (self.count, 1))
-
-        self.count += 1
-        self.profile.append(item)
-
-    def init_profile(self):
-        self.preheat_sizer = wx.GridBagSizer(5, 5)
-        self.rampup_sizer = wx.GridBagSizer(5, 5)
-        self.peak_sizer = wx.GridBagSizer(5, 5)
-        self.rampdown_sizer = wx.GridBagSizer(5, 5)
-
-        self.add_profile_item("Ts_min (°C)", self.preheat_sizer, 0, 300)
-        self.add_profile_item("Ts_max (°C)", self.preheat_sizer, 0, 300)
-        self.add_profile_item("Ts duration min (s)", self.preheat_sizer, 0, 300)
-        self.add_profile_item("Ts duration max (s)", self.preheat_sizer, 0, 300)
-
-        self.add_profile_item("ts ramp up min (°C/s)", self.preheat_sizer, 1, 100)
-        self.add_profile_item("ts ramp up max (°C/s)", self.preheat_sizer, 1, 100)
-        self.add_profile_item("tp ramp up min (°C/s)", self.peak_sizer, 1, 100)
-        self.add_profile_item("tp ramp up max (°C/s)", self.peak_sizer1, 100)
-
-        self.add_profile_item("Tl duration min (s)", self.rampup_sizer, 0, 300)
-        self.add_profile_item("Tl duration max (s)", self.rampup_sizer, 0, 300)
-
-        self.add_profile_item("Tp (°C)", self.peak_sizer, 0, 300)
-        self.add_profile_item("Tp duration min (s)", self.peak_sizer, 0, 300)
-        self.add_profile_item("Tp duration max (s)", self.peak_sizer, 0, 300)
-
-        self.add_profile_item("ramp down min (°C/s)", self.rampdown_sizer, -100, 0)
-        self.add_profile_item("ramp down max (°C/s)", self.rampdown_sizer, -100, 0)
-
-        self.add_profile_item("time max (s)", 0, 800)
-
-        self.box = wx.StaticBox(self.panel, -1, "Profile Settings")
-        self.bsizer = wx.StaticBoxSizer(self.box, wx.VERTICAL)
-        self.bsizer.Add(self.profile_sizer, 0, flag=wx.ALL, border=5)
-        self.hbox1.Add(self.bsizer, border=5, flag=wx.ALL | wx.ALIGN_TOP)
-
-    def init_oven_status(self):
-        self.oven_status_sizer = wx.GridBagSizer(5, 5)
-
-        #set_min = 0;
-        #set_max = 0;
-        #set_dt_min = 0;
-        #set_dt_max = 0;
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "Connected"), (0, 0))
-        self.oven_connected = wx.StaticText(self.panel, -1, str(self.datagen.connected()))
-        self.oven_status_sizer.Add(self.oven_connected, (0, 1))
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "Temperature"), (1, 0))
-        self.temperature = wx.TextCtrl(self.panel, -1, str(Arduino_Monitor.status[1]))
-        self.oven_status_sizer.Add(self.temperature, (1, 1))
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "Time"), (2, 0))
-        self.time = wx.TextCtrl(self.panel, -1, str(Arduino_Monitor.status[0]))
-        self.oven_status_sizer.Add(self.time, (2, 1))
-
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "State"), (3, 0))
-        self.pstate = wx.TextCtrl(self.panel, -1, str(Arduino_Monitor.status[3]))
-        self.oven_status_sizer.Add(self.pstate, (3, 1))
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "Error"), (4, 0))
-        self.perror = wx.TextCtrl(self.panel, -1, str(Arduino_Monitor.status[4]))
-        self.oven_status_sizer.Add(self.perror, (4, 1))
-
-        self.oven_status_sizer.Add(wx.StaticText(self.panel, -1, "Heating"), (5, 0))
-        self.is_oven_heating = wx.TextCtrl(self.panel, -1, str(Arduino_Monitor.status[5]))
-        self.oven_status_sizer.Add(self.is_oven_heating, (5, 1))
-
-        self.obox = wx.StaticBox(self.panel, -1, "Oven status")
-        self.osizer = wx.StaticBoxSizer(self.obox, wx.VERTICAL)
-        self.osizer.Add(self.oven_status_sizer, 0, flag=wx.ALL, border=5)
-        self.hbox1.Add(self.osizer, border=5, flag=wx.ALL | wx.ALIGN_TOP)
-
-
-    def init_log(self):
-        self.log_sizer = wx.GridBagSizer(5, 5)
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Ts_time_start"), (0, 0))
-        self.ts_time_start = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.ts_time_start, (0, 1))
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Ts_time_end"), (1, 0))
-        self.ts_time_end = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.ts_time_end, (1, 1))
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Tl_time_start"), (2, 0))
-        self.tl_time_start = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.tl_time_start, (2, 1))
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Tl_time_end"), (3, 0))
-        self.tl_time_end = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.tl_time_end, (3, 1))
-
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Tp_time_start"), (4, 0))
-        self.tp_time_start = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.tp_time_start, (4, 1))
-
-        self.log_sizer.Add(wx.StaticText(self.panel, -1, "Tp_time_end"), (5, 0))
-        self.tp_time_end = wx.TextCtrl(self.panel, -1)
-        self.log_sizer.Add(self.tp_time_end, (5, 1))
-
-        self.lbox = wx.StaticBox(self.panel, -1, "Profile Log")
-        self.lsizer = wx.StaticBoxSizer(self.lbox, wx.VERTICAL)
-        self.lsizer.Add(self.log_sizer, 0, flag=wx.ALL, border=5)
-        self.hbox1.Add(self.lsizer, border=5, flag=wx.ALL | wx.ALIGN_TOP)
-
-    def create_status_bar(self):
-        self.statusbar = self.CreateStatusBar()
-
-    def init_plot(self):
-        self.dpi = 100
-        self.fig = Figure((4.0, 4.0), dpi=self.dpi)
-
-        self.axes = self.fig.add_subplot(111)
-        self.axes.set_axis_bgcolor('black')
-        self.axes.set_title(u'Reflow Temperature', size=12)
-        self.axes.set_xlabel(u'Time / seconds', size=12)
-        self.axes.set_ylabel(u'Temperature (°C)', size=12)
-
-        pylab.setp(self.axes.get_xticklabels(), fontsize=8)
-        pylab.setp(self.axes.get_yticklabels(), fontsize=8)
-
-        # no 1
-        ts_min_x_min = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MIN] / Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_UP_MAX]
-        ts_min_y_min = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MIN]
-
-        # no 2
-        ts_max_x_min = ts_min_x_min + Arduino_Monitor.profile[Arduino_Monitor.PI_TS_DURATION_MIN]
-        ts_max_y_min = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MAX]
-
-        # no t1
-        ts_max_x_max = ts_min_x_min + Arduino_Monitor.profile[Arduino_Monitor.PI_TS_DURATION_MAX]
-        ts_max_y_max = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MAX]
-
-        # no t2
-        ts_min_x_max = ts_max_x_max - (ts_max_y_max - ts_min_y_min) / Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_UP_MAX]
-        ts_min_y_max = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MIN]
-
-        # no 10
-        t0_x_max = ts_min_x_max - (ts_max_x_max / Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_UP_MAX])
-        t0_y_max = 0
-
-        # no 4
-        tp_x_min = ts_max_x_min + (Arduino_Monitor.profile[Arduino_Monitor.PI_TP] - ts_max_y_min) / Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_UP_MAX]
-        tp_y_min = Arduino_Monitor.profile[Arduino_Monitor.PI_TP]
-
-        # no 5
-        tp_x_max = tp_x_min + Arduino_Monitor.profile[Arduino_Monitor.PI_TP_DURATION_MAX]
-        tp_y_max = tp_y_min
-
-        # no 8
-        tp5_x_max = tp_x_min + Arduino_Monitor.profile[Arduino_Monitor.PI_TP_DURATION_MIN]
-        tp5_y_max = tp_y_max - 5
-
-        # no 9
-        tp5_x_min = ts_max_x_max + (tp5_y_max - ts_max_y_max) / Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_UP_MAX]
-        tp5_y_min = tp5_y_max
-
-        # no 6
-        end_x_max = tp_x_max + tp_y_max / abs(Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_DOWN_MIN])
-        end_y_max = 0
-
-        self.xmax = end_x_max + 20
-        self.ymax = Arduino_Monitor.profile[Arduino_Monitor.PI_TP] + 20
-
-        # no 7
-        end_x_min = tp5_x_max + tp5_y_max / abs(Arduino_Monitor.profile[Arduino_Monitor.PI_RAMP_DOWN_MAX])
-        end_y_min = 0
-
-        tsmin = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MIN]
-        tsmax = Arduino_Monitor.profile[Arduino_Monitor.PI_TS_MAX]
-        tl = Arduino_Monitor.profile[Arduino_Monitor.PI_TL]
-        tp = Arduino_Monitor.profile[Arduino_Monitor.PI_TP]
-        self.ts_line_min = matplotlib.lines.Line2D([0, self.xmax], [tsmin, tsmin],
-          transform=self.axes.transData, figure=self.fig, color='green')
-        self.ts_line_max = matplotlib.lines.Line2D([0, self.xmax], [tsmax, tsmax],
-          transform=self.axes.transData, figure=self.fig, label="Ts_max", color='lightgreen')
-        self.tl_line = matplotlib.lines.Line2D([0, self.xmax], [tl, tl],
-          transform=self.axes.transData, figure=self.fig, label="Tl", color='yellow')
-        self.tp_line = matplotlib.lines.Line2D([0, self.xmax], [tp, tp],
-          transform=self.axes.transData, figure=self.fig, label="Tp", color='blue')
-
-        self.ts_line_min.set_label("Ts_min")
-        self.ts_line_min.set_label("Ts_max")
-        self.tl_line.set_label("Tl")
-        self.tp_line.set_label("Tp")
-        self.fig.lines.extend([self.ts_line_min, self.ts_line_max, self.tl_line, self.tp_line])
-
-        verts = [
-          [0.0, 0.0],
-          [ts_min_x_min, ts_min_y_min],
-          [ts_max_x_min, ts_max_y_min],
-          [ts_max_x_max, ts_max_y_max],
-          [ts_min_x_max, ts_min_y_max],
-          #[tp_x_min, tp_y_min],
-          #[tp_x_max, tp_y_max],
-          #[end_x_max, end_y_max],
-          #[end_x_min, end_y_min],
-          #[tp5_x_max, tp5_y_max],
-          #[tp5_x_min, tp5_y_min],
-          [t0_x_max,  t0_y_max],
-          [0.0, 0.0]]
-
-        codes = [
-          Path.MOVETO,
-          Path.LINETO,
-          Path.LINETO,
-          Path.LINETO,
-          Path.LINETO,
-          Path.LINETO,
-          #Path.LINETO,
-          #Path.LINETO,
-          #Path.LINETO,
-          #Path.LINETO,
-          Path.CLOSEPOLY]
-
-        self.plot_data = self.axes.plot(
-            self.data,
-            linewidth=1,
-            color=(1, 1, 0),
-            )[0]
-
-        print "verts", verts
-
-
-        path = Path(verts, codes)
-        self.patch = patches.PathPatch(path, edgecolor="red", facecolor='orange', lw=2)
-        self.axes.add_patch(self.patch)
-        self.axes.legend( (self.ts_line_min, self.ts_line_max, self.tl_line, self.tp_line),  ('Ts_min', 'Ts_max', 'Tl', 'Tp'), loc=2)
-
-    def draw_plot(self):
-        """ Redraws the plot
-        """
-
-        self.axes.set_xbound(lower=0, upper=self.xmax)
-        self.axes.set_ybound(lower=0, upper=self.ymax)
-
-        self.axes.grid(True, color='gray')
-
-        pylab.setp(self.axes.get_xticklabels(), visible=True)
-
-        self.plot_data.set_xdata(np.arange(len(self.data)))
-        self.plot_data.set_ydata(np.array(self.data))
-
-        self.canvas.draw()
-
-    def update_config(self):
-        for ix, i in enumerate(self.profile):
-            i.SetValue(str(Arduino_Monitor.profile[i]))
-
-    def update_state(self):
-        if Arduino_Monitor.status[3] > 0:
-            self.started = True
-
-        self.time.SetValue(str(Arduino_Monitor.status[0]))
-        self.temperature.SetValue(str(Arduino_Monitor.status[1]))
-        self.pstate.SetValue(str(Arduino_Monitor.status[3]))
-        self.perror.SetValue(str(Arduino_Monitor.status[4]))
-        self.is_oven_heating.SetValue(str(Arduino_Monitor.status[5]))
-
-
-    def on_start_button(self, event):
-        self.started = self.datagen.send_start()
-        self.recv_config_button.Disable()
-        self.send_button.Disable()
-        self.profile = []
-        for i in range(30):
-          self.profile_sizer.Remove(i)
-        self.profile_sizer.Layout()
-
-    def on_recv_config_button(self, event):
-        if not self.started:
-            self.datagen.recv_config()
-
-
-    def on_send_button(self, event):
-        if not self.started:
-            self.datagen.send_config()
-
-    def on_save_plot(self, event):
-        file_choices = "PNG (*.png)|*.png"
-
-        dlg = wx.FileDialog(
-            self,
-            message="Save plot as...",
-            defaultDir=os.getcwd(),
-            defaultFile="plot.png",
-            wildcard=file_choices,
-            style=wx.SAVE)
-
-        if dlg.ShowModal() == wx.ID_OK:
-            path = dlg.GetPath()
-            self.canvas.print_figure(path, dpi=self.dpi)
-            self.flash_status_message("Saved to %s" % path)
-
-    def on_redraw_timer(self, event):
-
-        if self.started:
-            self.data.append(self.datagen.next())
-
-        self.update_state()
-        self.draw_plot()
-
-    def on_exit(self, event):
-        self.Destroy()
-
-    def flash_status_message(self, msg, flash_len_ms=1500):
-        self.statusbar.SetStatusText(msg)
-        self.timeroff = wx.Timer(self)
-        self.Bind(
-            wx.EVT_TIMER,
-            self.on_flash_status_off,
-            self.timeroff)
-        self.timeroff.Start(flash_len_ms, oneShot=True)
-
-    def on_flash_status_off(self, event):
-        self.statusbar.SetStatusText('')
-
-
-if __name__ == '__main__':
-    app = wx.PySimpleApp()
-    app.frame = GraphFrame()
-    app.frame.Show()
-    app.MainLoop()
-

reflowctl/serialmon.py

@@ -1,81 +0,0 @@
-#!/usr/bin/python
-# -*- coding: utf-8 -*-
-
-import serial, struct, time
-
-ser = serial.Serial('/dev/ttyUSB0', 9600, timeout=2)
-
-
-buf = ""
-alles = []
-
-#def parse():
-  #buffer = list()
-  #while 1:
-    #try:
-      #i = ser.read(1)
-      #if ord(i) == 255:
-    #except Exception, e:
-      #print e
-    #else:
-
-def recv_config():
-  ser.write(chr(255))
-  ser.flush()
-  read(30)
-  ser.flushInput()
-  data = struct.unpack("hhhhhhhhhhhhhhh", buf)
-  print
-  print "Profile:"
-  print "ts_min:", data[0]
-  print "ts_max:", data[1]
-  print "tl:", data[2]
-  print "tp:", data[3]
-  print "time_max:", data[4]
-  print "ramp_up_min:", data[5]
-  print "ramp_up_max:", data[6]
-  print "ramp_down_min:", data[7]
-  print "ramp_down_max:", data[8]
-
-  print "ts_duration_min:", data[9]
-  print "ts_duration_max:", data[10]
-  print "tl_duration_min:", data[11]
-  print "tl_duration_max:", data[12]
-  print "tp_duration_min:", data[13]
-  print "tp_duration_max:", data[14]
-  print
-
-
-def recv_state():
-  ser.write(chr(254))
-  ser.flush()
-  read(11)
-  data = struct.unpack("hhhhhb", buf)
-  print "time: %ds, temperature: %d°C, last temperature: %d°C, state: %d, error condition: %d, heating: %d" % data
-
-
-def send_config():
-  ser.write(chr(253))
-  ser.write(buf)
-  ser.flushInput()
-
-
-def read(l):
-  global buf
-  global alles
-  buf = ""
-  while len(buf) < l:
-    try:
-      buf += ser.read(l)
-      alles.append(buf)
-    except Exception, e:
-      print e
-  ser.flushInput()
-
-
-time.sleep(2)
-recv_config()
-while 1:
-  recv_state()
-  time.sleep(1)
-

reflowctl/solder.py

@@ -0,0 +1,288 @@
+
+
+import os
+import os.path
+
+import xml.etree.ElementTree as etree
+
+from PyQt4 import QtGui, QtCore
+
+from numpy import arange, sin, pi, array, linspace, arange
+
+from temp_level import TempLevel, set_colors
+from edge_widget import Edge
+from control_widgets import AddRemoveWidget
+
+
+def getTemperature():
+    return 20.
+
+def indent(elem, level=0):
+    i = "\n" + level*"  "
+    if len(elem):
+        if not elem.text or not elem.text.strip():
+            elem.text = i + "  "
+        if not elem.tail or not elem.tail.strip():
+            elem.tail = i
+        for child in elem:
+            indent(child, level+1)
+        if not child.tail or not child.tail.strip():
+            child.tail = i
+        if not elem.tail or not elem.tail.strip():
+            elem.tail = i
+    else:
+        if level and (not elem.tail or not elem.tail.strip()):
+            elem.tail = i
+
+
+class Solder(QtCore.QObject):
+
+    log_message = QtCore.pyqtSignal(str)
+
+    def __init__(self, filename, name=str(), description=str(), parent=None):
+        super(Solder, self).__init__(parent)
+        self.changed = False
+        self.filename = filename
+        self.name = name
+        self.description = description
+        self.temp_levels = list()
+        self.edges = list()
+
+    def __unicode__(self):
+        return unicode(self.name)
+
+    def __str__(self):
+        return self.name
+
+    def add_temp_level(self, name, temp, is_env):
+        s = TempLevel(name, temp, is_env)
+        self.temp_levels.append(s)
+        return s
+
+    def get_temp_level_by_name(self, name):
+        assert isinstance(name, basestring)
+        for i in self.temp_levels:
+            if i.name == name:
+                return i
+        return None
+
+    def calc_profile(self):
+        if not self.edges:
+            return array([]), array([]), 0, 300, 0, 300
+        self.log = list()
+        x = list()
+        y = list()
+        duration_points = dict()
+        rate_points = dict()
+        time = 0
+
+        def calc(edge):
+            if edge.duration:
+                return time + edge.duration
+            elif edge.rate:
+                return time + (edge.to_tl.temp - edge.from_tl.temp) / edge.rate
+            else:
+                raise Exception("edge %r has neither duration nor rate set" % edge)
+
+        for _edge in self.edges:
+            x.append(float(time))
+            y.append(float(_edge.from_tl.temp))
+            time = calc(_edge)
+
+        x.append(time)
+        y.append(self.edges[-1].to_tl.temp)
+        return array(x), array(y), min(x), max(x), min(y), max(y)
+
+
+    @staticmethod
+    def unpack(filename, parent):
+        xmltree = etree.parse(filename)
+        root = xmltree.getroot()
+        solder_node = root[0]
+        s = Solder(filename, solder_node.attrib["name"], solder_node.attrib["description"], parent)
+        env_count = 0
+        for temp_level in solder_node.findall("state"):
+            tstr = temp_level.attrib["temperature"]
+            is_env = False
+            try:
+                temp = int(tstr)
+            except ValueError:
+                if tstr == "$ENV":
+                    temp = getTemperature()
+                    is_env = True
+                    env_count += 1
+            s.add_temp_level(temp_level.attrib["name"], temp, is_env)
+
+        set_colors(s.temp_levels)
+
+        for edge in solder_node.findall("edge"):
+            from_tl = s.get_temp_level_by_name(edge.attrib["from"])
+            to_tl = s.get_temp_level_by_name(edge.attrib["to"])
+            duration = None
+            rate = None
+            try:
+                duration = float(edge.attrib["duration"])
+            except ValueError:
+                pass
+            try:
+                rate = float(edge.attrib["rate"])
+            except ValueError:
+                pass
+
+            e = Edge(from_tl, to_tl, duration, rate)
+            s.edges.append(e)
+        return s
+
+    def save(self):
+        self.changed = True
+        if self.changed:
+            solder_node = etree.Element("solder_type", {"name" : self.name, "description" : self.description})
+            for temp_level in self.temp_levels:
+                temp = temp_level.is_env and "$ENV" or str(temp_level.temp)
+                solder_node.append(etree.Element("state", {"name" : temp_level.name, "temperature" : temp}))
+            for edge in self.edges:
+                element = etree.Element("edge", {
+                    "from" : edge.from_tl.name,
+                    "to" : edge.to_tl.name,
+                    "duration" : str(edge.duration),
+                    "rate" : str(edge.rate)})
+                solder_node.append(element)
+
+            dirname = SolderListModel.dirname()
+            root = etree.Element("xml")
+            root.append(solder_node)
+            if self.filename is None:
+                self.filename = os.path.join(dirname, self.name + ".xml")
+            etree.ElementTree(root).write(self.filename, "UTF-8")
+            self.changed = False
+
+    def setChanged(self):
+        self.changed = True
+
+
+class SolderListModel(QtCore.QAbstractListModel):
+    def __init__(self, parent=None, *args):
+        """ datain: a list where each item is a row
+        """
+        super(SolderListModel, self).__init__(parent, *args)
+        self.solder_list = []
+        self._load_solder_list()
+
+    def rowCount(self, parent=QtCore.QModelIndex()):
+        return len(self.solder_list)
+
+    def _load_solder_list(self):
+        dirname = self.dirname()
+        dirlisting = filter(
+            lambda x: os.path.splitext(x)[1] == ".xml", os.listdir(dirname))
+        for p in dirlisting:
+            self.solder_list.append(
+                Solder.unpack(os.path.join(dirname, p), self))
+        self.solder_list.sort(key=lambda x: x.name)
+        self.reset()
+
+    def headerData(self, col, orientation, role):
+        if orientation == QtCore.Qt.Horizontal and role == QtCore.Qt.DisplayRole:
+            return QtCore.QVariant("Solder Paste")
+        return QtCore.QVariant()
+
+    def data(self, index, role):
+        if not index.isValid():
+            return QtCore.QVariant()
+
+        solder = self.solder_list[index.row()]
+        if role == QtCore.Qt.DisplayRole:
+            return QtCore.QVariant(solder.name)
+
+        elif role == QtCore.Qt.DecorationRole and solder.changed:
+            return QtGui.QIcon.fromTheme("document-save")
+
+    def setData(self, index, variant, role):
+        if index.isValid() and role == QtCore.Qt.EditRole:
+            new_name = str(variant.toString())
+            if (new_name is not None and new_name != "" and
+                self.check_name(new_name)):
+                solder = self.solder_list[index.row()]
+                solder.name = new_name
+                solder.changed = True
+                return True
+        return False
+
+    def flags(self, index):
+        if not index.isValid():
+            return 0
+        return QtCore.Qt.ItemFlags(
+            QtCore.Qt.ItemIsEnabled |
+            QtCore.Qt.ItemIsSelectable |
+            QtCore.Qt.ItemIsEditable)
+
+    def create_solder(self):
+        solder = Solder(None, "new %d" % len(self.solder_list), "")
+
+        tl = solder.add_temp_level("environment temp", getTemperature(), True)
+        tl.color = QtGui.QColor(0, 0, 0)
+        self.solder_list.append(solder)
+        self.reset()
+
+    @staticmethod
+    def dirname():
+        return os.path.join(os.path.dirname(__file__), "solder_types")
+
+    def check_name(self, name):
+        for solder in self.solder_list:
+            if name == solder.name:
+                return False
+        return True
+
+
+class SolderWidget(QtGui.QWidget):
+    solder_selected = QtCore.pyqtSignal(QtCore.QModelIndex)
+
+    def __init__(self, parent, readonly=False):
+        super(SolderWidget, self).__init__(parent)
+        self.solder_model = SolderListModel(self)
+        self.solder_view = QtGui.QListView()
+        self.solder_view.setModel(self.solder_model)
+        self.solder_controls = AddRemoveWidget(self)
+
+        layout = QtGui.QHBoxLayout(self)
+        layout.addWidget(self.solder_view)
+        layout.addWidget(self.solder_controls)
+
+        self.connect(
+            self.solder_controls.add_button,
+            QtCore.SIGNAL("clicked()"),
+            self.create_solder)
+
+        self.connect(
+            self.solder_controls.remove_button,
+            QtCore.SIGNAL("clicked()"),
+            self.remove_solder)
+
+        self.solder_view.setCurrentIndex(self.solder_model.index(0,0))
+
+    def create_solder(self):
+        self.solder_model.create_solder()
+        ix = self.solder_model.index(self.solder_model.rowCount(None) - 1, 0)
+        self.solder_view.setCurrentIndex(ix)
+        self.solder_selected.emit(ix)
+
+    def remove_solder(self):
+        index = self.solder_view.currentIndex()
+        solder = self.solder_model.solder_list[index.row()]
+        try:
+            os.remove(solder.filename)
+        except (OSError, TypeError):
+            pass
+        del self.solder_model.solder_list[index.row()]
+        self.solder_model.reset()
+        new_index = self.solder_model.index(0)
+        self.solder_view.setCurrentIndex(new_index)
+        return new_index
+
+    def save_solder(self, index):
+        self.solder_model.solder_list[index.row()].save()
+        self.solder_model.reset()
+        new_index = self.solder_model.index(self.solder_model.solder_list.index(self.plotter.solder))
+        self.solder_widget.solder_view.setCurrentIndex(new_index)
+

reflowctl/solder_types/lead_noclean.xml

@@ -1,34 +1,2 @@
-<xml>
+<?xml version='1.0' encoding='UTF-8'?>
-  <solder_type name="lead noclean" description="">
+<xml><solder_type description="" name="lead noclean"><state name="environment temp" temperature="$ENV" /><state name="preheat start" temperature="150" /><state name="preheat end" temperature="185" /><state name="tal" temperature="230" /><state name="peak-5°C" temperature="255" /><state name="peak" temperature="260" /><edge duration="None" from="environment temp" rate="1.0" to="preheat start" /><edge duration="100.0" from="preheat start" rate="1.0" to="preheat end" /><edge duration="None" from="preheat end" rate="1.0" to="tal" /><edge duration="25.0" from="tal" rate="1.0" to="peak-5°C" /><edge duration="25.0" from="peak-5°C" rate="1.0" to="peak" /><edge duration="25.0" from="peak" rate="-1.0" to="peak-5°C" /><edge duration="25.0" from="peak-5°C" rate="-1.0" to="tal" /><edge duration="None" from="tal" rate="-3.0" to="preheat end" /><edge duration="None" from="preheat end" rate="-2.0" to="preheat start" /><edge duration="None" from="preheat start" rate="-2.0" to="environment temp" /></solder_type></xml>
-    <state name="environment temp" temperature="$ENV" />
-    <state name="preheat start" temperature="150" />
-    <state name="preheat end" temperature="180" />
-    <state name="tal" temperature="230" />
-    <state name="peak" temperature="260" />
-    <duration value="100" >
-      <state name="preheat start" />
-      <state name="preheat end" />
-    </duration>
-    <duration value="100" >
-      <state name="tal" />
-      <state name="peak" />
-      <state name="tal" />
-    </duration>
-    <rate value="1">
-      <state name="environment temp" />
-      <state name="preheat start" />
-    </rate>
-    <rate value="1">
-      <state name="preheat start" />
-      <state name="preheat end" />
-    </rate>
-    <rate value="1">
-      <state name="preheat end" />
-      <state name="tal" />
-    </rate>
-    <rate value="-2">
-      <state name="peak" />
-      <state name="environment temp" />
-    </rate>
-  </solder_type>
-</xml>

reflowctl/solder_types/leadfree_noclean.xml

@@ -1,34 +0,0 @@
-<xml>
-  <solder_type name="leadfree noclean" description="">
-    <state name="environment temp" temperature="$ENV" />
-    <state name="preheat start" temperature="130" />
-    <state name="preheat end" temperature="185" />
-    <state name="tal" temperature="220" />
-    <state name="peak" temperature="250" />
-    <duration value="100" >
-      <state name="preheat start" />
-      <state name="preheat end" />
-    </duration>
-    <duration value="100">
-      <state name="tal" />
-      <state name="peak" />
-      <state name="tal" />
-    </duration>
-    <rate value="1">
-      <state name="environment temp" />
-      <state name="preheat start" />
-    </rate>
-    <rate value="1">
-      <state name="preheat start" />
-      <state name="preheat end" />
-    </rate>
-    <rate value="1">
-      <state name="preheat end" />
-      <state name="tal" />
-    </rate>
-    <rate value="-2">
-      <state name="peak" />
-      <state name="environment temp" />
-    </rate>
-  </solder_type>
-</xml>

reflowctl/solder_types/test kotze.xml

@@ -1,2 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<xml><solder_type description="" name="test kotze"><state name="environment temp" temperature="$ENV" /><state name="preheat start" temperature="150" /><state name="preheat end" temperature="185" /><state name="tal" temperature="220" /><state name="peak" temperature="250" /><duration value="100"><state name="preheat start" /><state name="preheat end" /></duration><duration value="100"><state name="tal" /><state name="peak" /><state name="tal" /></duration><rate value="1"><state name="environment temp" /><state name="preheat start" /></rate><rate value="1"><state name="preheat start" /><state name="preheat end" /></rate><rate value="1"><state name="preheat end" /><state name="tal" /></rate><rate value="-2"><state name="peak" /><state name="environment temp" /></rate></solder_type></xml>

reflowctl/temp_level.py

@@ -0,0 +1,286 @@
+# -*- coding: utf-8 -*-
+
+from PyQt4 import QtGui, QtCore
+from control_widgets import AddRemoveWidget
+
+
+def calc_colors(count):
+    if count == 1:
+        return [QtGui.QColor(0, 255, 0),]
+    r = 0
+    g = 255
+    step = int(512. / (count-1))
+    colors = list()
+    for i in range(count):
+        colors.append(QtGui.QColor(r, g, 0))
+        if r < 255:
+            r += step
+            if r > 255:
+                g -= (r - 256)
+                r = 255
+                g = max(0, g)
+        else:
+            g -= step
+            g = max(0, g)
+    return colors
+
+
+def set_colors(temp_levels):
+    colors = calc_colors(len(temp_levels) - 1)
+    ix = 0
+    for temp_level in temp_levels:
+        if not temp_level.is_env:
+            temp_level.color = colors[ix]
+            ix += 1
+        else:
+            temp_level.color = QtGui.QColor("black")
+
+
+class TempLevel(QtCore.QObject):
+    def __init__(self, name, temp, is_env=False):
+        super(TempLevel, self).__init__()
+        self.name = name
+        self.temp = temp
+        self.is_env = is_env
+        self.color = None
+
+
+    def __str__(self):
+        return "<TempLevel: name=%r, temp=%r>" % (self.name, self.temp)
+
+
+    def __lt__(self, other):
+        return self.temp < other.temp
+
+
+    def __le__(self, other):
+        return self.temp <= other.temp
+
+
+    def __eq__(self, other):
+        return self.temp == other.temp
+
+
+    def is_between(self, tl1, tl2):
+        tmp = [tl1, tl2, self]
+        tmp.sort()
+        return self == tmp[1]
+
+
+    def set_next(self, temp_level):
+        if temp_level is self:
+            raise ValueError("same temp_level")
+        self.next = temp_level
+
+
+    def __repr__(self):
+        return "TempLevel(%r, %r, %r)" % (self.name, self.temp, self.is_env)
+
+
+class TempLevelModel(QtCore.QAbstractTableModel):
+    solder_changed = QtCore.pyqtSignal()
+    status_message = QtCore.pyqtSignal(QtCore.QString, int)
+
+    def __init__(self, parent):
+        super(TempLevelModel, self).__init__(parent)
+        self._changed = False
+        self.temp_levels = list()
+        self.headerdata = [u"Name", u"Temperature (°C)"]
+
+
+    def headerData(self, col, orientation, role):
+        if orientation == QtCore.Qt.Horizontal and role == QtCore.Qt.DisplayRole:
+            return QtCore.QVariant(self.headerdata[col])
+        return QtCore.QVariant()
+
+
+    def rowCount(self, parent):
+        return len(self.temp_levels)
+
+
+    def columnCount(self, parent):
+        return 2
+
+
+    def data(self, index, role):
+        if not index.isValid():
+            return QtCore.QVariant()
+
+        if role == QtCore.Qt.DisplayRole:
+          col = index.column()
+          if col == 0:
+              return QtCore.QVariant(self.temp_levels[index.row()].name)
+          else:
+              return QtCore.QVariant(self.temp_levels[index.row()].temp)
+
+        if index.column() == 0 and role == QtCore.Qt.DecorationRole:
+            p = QtGui.QPixmap(10, 10)
+            color = self.temp_levels[index.row()].color
+            p.fill(color)
+            return p
+
+        return QtCore.QVariant()
+
+
+    def flags(self, index):
+        if not index.isValid():
+            return 0
+
+        if index.row() != 0:
+            return QtCore.Qt.ItemFlags(QtCore.Qt.ItemIsEnabled | QtCore.Qt.ItemIsSelectable | QtCore.Qt.ItemIsEditable)
+        else:
+            return QtCore.Qt.ItemFlags(QtCore.Qt.ItemIsEnabled | QtCore.Qt.ItemIsSelectable)
+
+
+    def neigbors(self, temp_level):
+        ix = self.temp_levels.index(temp_level)
+        return self.temp_levels[ix-1], self.temp_levels[ix+1]
+
+
+    def setData(self, index, variant, role):
+        if index.isValid() and role == QtCore.Qt.EditRole:
+            col = index.column()
+            if col == 0:
+                self.temp_levels[index.row()].name = unicode(variant.toString())
+            elif col == 1:
+                temp, res = variant.toInt()
+                tl = self.temp_levels[index.row()]
+                try:
+                    tl0 = self.temp_levels[index.row() - 1]
+                    if tl0.temp >= temp:
+                        self.status_message.emit(QtCore.QString(u"Error: TempLevel %r cannot be moved across TempLevel %r!" % (tl.name, tl0.name)), 10000)
+                        return False
+                except Exception, e:
+                    pass
+                try:
+                    tl1 = self.temp_levels[index.row() + 1]
+                    if tl1.temp <= temp:
+                        self.status_message.emit(QtCore.QString(u"Error: TempLevel %r cannot be moved across TempLevel %r!" % (tl.name, tl1.name)), 10000)
+                        return False
+                except Exception, e:
+                    pass
+                tl.temp = temp
+
+            self.solder_changed.emit()
+            return True
+        return False
+
+
+    def remove_temp_level(self, index):
+        tmp = self.temp_levels[index]
+        del self.temp_levels[index]
+        self.reset()
+        self.solder_changed.emit()
+        return tmp
+
+
+    def add_temp_level(self, index, temp_level):
+        self.temp_levels.insert(index.row() + 1, temp_level)
+        set_colors(self.temp_levels)
+        self.reset()
+        self.solder_changed.emit()
+
+
+    def append_temp_level(self, temp_level):
+        self.temp_levels.append(temp_level)
+        set_colors(self.temp_levels)
+        self.reset()
+        self.solder_changed.emit()
+
+
+    def setTempLevels(self, temp_levels):
+        assert isinstance(temp_levels, list)
+        self.temp_levels = temp_levels
+        self.reset()
+
+
+    def clear(self):
+        self.temp_levels = list()
+        self.reset()
+
+
+    def get_temp_level(self, ix):
+        return self.temp_levels[ix]
+
+
+class TempLevelWidget(QtGui.QWidget):
+    temp_level_removed = QtCore.pyqtSignal(TempLevel)
+    temp_level_added = QtCore.pyqtSignal(TempLevel, TempLevel)
+    solder_changed = QtCore.pyqtSignal()
+
+    def __init__(self, parent, readonly=False):
+        super(TempLevelWidget, self).__init__(parent)
+        self.readonly = readonly
+        self.temp_level_model = TempLevelModel(self)
+
+        self.temp_level_view = QtGui.QTableView()
+        self.temp_level_view.setModel(self.temp_level_model)
+        self.temp_level_view.verticalHeader().setVisible(False)
+        self.temp_level_view.resizeColumnsToContents()
+        self.temp_level_view.horizontalHeader().setStretchLastSection(True)
+        self.temp_level_view.setSelectionBehavior(QtGui.QAbstractItemView.SelectRows)
+
+        h = QtGui.QHBoxLayout()
+        h.addWidget(self.temp_level_view)
+        self.setLayout(h)
+
+        self.connect(
+            self.temp_level_view,
+            QtCore.SIGNAL("clicked(QModelIndex)"),
+            self.temp_level_selected)
+
+        if not readonly:
+            self.controls = AddRemoveWidget(self)
+            h.addWidget(self.controls)
+
+            self.connect(
+                self.controls.add_button,
+                QtCore.SIGNAL("clicked()"),
+                self.append_temp_level)
+
+            self.connect(
+                self.controls.remove_button,
+                QtCore.SIGNAL("clicked()"),
+                self.remove_temp_level)
+
+            self.connect(
+                self.temp_level_model,
+                QtCore.SIGNAL("solder_changed()"),
+                self._solder_changed)
+
+    def _solder_changed(self):
+        self.solder_changed.emit()
+
+
+    def setData(self, solder):
+        self.temp_level_model.setTempLevels(solder.temp_levels)
+        self.temp_level_view.resizeColumnsToContents()
+        self.temp_level_view.setCurrentIndex(self.temp_level_model.index(0, 0))
+
+    def add_temp_level(self):
+        pass
+        #new_temp = old_tl.temp + (self.temp_level_model.temp_levels[index.row() + 1].temp - old_tl.temp) / 2
+
+
+    def append_temp_level(self):
+        old_tl = self.temp_level_model.temp_levels[-1]
+        new_temp = old_tl.temp + 20
+        ix = self.temp_level_model.rowCount(None)
+        new_tl = TempLevel("new " + str(ix), new_temp)
+        self.temp_level_model.append_temp_level(new_tl)
+        self.temp_level_view.setCurrentIndex(self.temp_level_model.index(ix, 0))
+        self.temp_level_added.emit(old_tl, new_tl)
+
+    def remove_temp_level(self):
+        self.temp_level_removed.emit(
+            self.temp_level_model.remove_temp_level(
+                self.temp_level_model.rowCount(None) - 1))
+        self.solder_changed.emit()
+        self.temp_level_view.setCurrentIndex(self.temp_level_model.index(self.temp_level_model.rowCount(None) - 1, 0))
+
+
+    def temp_level_selected(self, index):
+        if index.isValid():
+            row = index.row()
+            if not self.readonly:
+                self.controls.remove_button.setEnabled(not self.temp_level_model.temp_levels[row].is_env)