added EKG code, since i changed the protocol
This commit is contained in:
Lucas Pleß
parent
e9830ca276
commit
e116bb2447
|
|
@ -0,0 +1,462 @@
|
||||||
|
//*****************************************************************************
|
||||||
|
// MSP430FG439-Heart Rate Monitor Demo
|
||||||
|
//
|
||||||
|
// Description; Uses one Instrumentation Amplifier INA321 and the three
|
||||||
|
// internal opamps of the MSP430FG439
|
||||||
|
//
|
||||||
|
// Murugavel Raju
|
||||||
|
// Texas Instruments, Inc
|
||||||
|
// October 2004
|
||||||
|
// Edited by: M Morales, November 2008
|
||||||
|
// * Updated to non-depracated intrinsic functions
|
||||||
|
// * Changed spacing for legibility
|
||||||
|
// Edited by:
|
||||||
|
// Penko T. Bozhkov - Olimex LTD, 05.10.2012
|
||||||
|
// * RTC capcitors changed according to Olimex's crystall requirements
|
||||||
|
// * Olimex LCD definitions are added and heart rate is visualized at 2 places on LCD
|
||||||
|
// Built with IAR Embedded Workbench Version: 4.21
|
||||||
|
//*****************************************************************************
|
||||||
|
//*****************************************************************************
|
||||||
|
// THIS PROGRAM IS PROVIDED "AS IS". TI MAKES NO WARRANTIES OR
|
||||||
|
// REPRESENTATIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
|
||||||
|
// INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||||
|
// FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR
|
||||||
|
// COMPLETENESS OF RESPONSES, RESULTS AND LACK OF NEGLIGENCE.
|
||||||
|
// TI DISCLAIMS ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET
|
||||||
|
// POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
|
||||||
|
// INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE PROGRAM OR
|
||||||
|
// YOUR USE OF THE PROGRAM.
|
||||||
|
//
|
||||||
|
// IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
|
||||||
|
// CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY
|
||||||
|
// THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED
|
||||||
|
// OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN ANY WAY OUT
|
||||||
|
// OF THIS AGREEMENT, THE PROGRAM, OR YOUR USE OF THE PROGRAM.
|
||||||
|
// EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
|
||||||
|
// REMOVAL OR REINSTALLATION, COMPUTER TIME, LABOR COSTS, LOSS
|
||||||
|
// OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR LOSS OF
|
||||||
|
// USE OR INTERRUPTION OF BUSINESS. IN NO EVENT WILL TI'S
|
||||||
|
// AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
|
||||||
|
// YOUR USE OF THE PROGRAM EXCEED FIVE HUNDRED DOLLARS
|
||||||
|
// (U.S.$500).
|
||||||
|
//
|
||||||
|
// Unless otherwise stated, the Program written and copyrighted
|
||||||
|
// by Texas Instruments is distributed as "freeware". You may,
|
||||||
|
// only under TI's copyright in the Program, use and modify the
|
||||||
|
// Program without any charge or restriction. You may
|
||||||
|
// distribute to third parties, provided that you transfer a
|
||||||
|
// copy of this license to the third party and the third party
|
||||||
|
// agrees to these terms by its first use of the Program. You
|
||||||
|
// must reproduce the copyright notice and any other legend of
|
||||||
|
// ownership on each copy or partial copy, of the Program.
|
||||||
|
//
|
||||||
|
// You acknowledge and agree that the Program contains
|
||||||
|
// copyrighted material, trade secrets and other TI proprietary
|
||||||
|
// information and is protected by copyright laws,
|
||||||
|
// international copyright treaties, and trade secret laws, as
|
||||||
|
// well as other intellectual property laws. To protect TI's
|
||||||
|
// rights in the Program, you agree not to decompile, reverse
|
||||||
|
// engineer, disassemble or otherwise translate any object code
|
||||||
|
// versions of the Program to a human-readable form. You agree
|
||||||
|
// that in no event will you alter, remove or destroy any
|
||||||
|
// copyright notice included in the Program. TI reserves all
|
||||||
|
// rights not specifically granted under this license. Except
|
||||||
|
// as specifically provided herein, nothing in this agreement
|
||||||
|
// shall be construed as conferring by implication, estoppel,
|
||||||
|
// or otherwise, upon you, any license or other right under any
|
||||||
|
// TI patents, copyrights or trade secrets.
|
||||||
|
//
|
||||||
|
// You may not use the Program in non-TI devices.
|
||||||
|
//*****************************************************************************
|
||||||
|
#include "msp430fg439.h"
|
||||||
|
#include "math.h"
|
||||||
|
//defines
|
||||||
|
#define PB_2_0 (1 << 0) // Push Button on P2.0
|
||||||
|
#define PB_2_1 (1 << 1) // Push Button on P2.1
|
||||||
|
|
||||||
|
// variables declaration
|
||||||
|
static char beats;
|
||||||
|
int i=0, first_detection=0;
|
||||||
|
long result = 0;
|
||||||
|
int Datain, Dataout, Dataout_pulse, pulseperiod, counter, heartrate;
|
||||||
|
int heartrate_buffer[] = {0,0,0,0,0,0,0,0,0,0};
|
||||||
|
int heartrate_cursor = 0, heartrate_mean;
|
||||||
|
|
||||||
|
// Lowpass FIR filter coefficients for 17 taps to filter > 30Hz
|
||||||
|
static const int coeffslp[9] = {
|
||||||
|
5225, 5175, 7255, 9453, 11595, 13507, 15016, 15983, 16315 };
|
||||||
|
// Highpass FIR filter coefficients for 17 taps to filter < 2Hz
|
||||||
|
static const int coeffshp[9] = {
|
||||||
|
-763, -1267, -1091, -1867, -1969, -2507, -2619, -2911, 29908 };
|
||||||
|
|
||||||
|
// *******************************************
|
||||||
|
// Definitions related to Olimex LCD Digits!!!!
|
||||||
|
// *******************************************
|
||||||
|
// Definitions for Olimex LCD digits 10 and 11
|
||||||
|
#define a 0x10
|
||||||
|
#define b 0x01
|
||||||
|
#define c 0x04
|
||||||
|
#define d 0x08
|
||||||
|
#define e 0x40
|
||||||
|
#define f 0x20
|
||||||
|
#define g 0x02
|
||||||
|
#define h 0x80
|
||||||
|
// Character generator definition for display digits 10 and 11
|
||||||
|
const char char_gen_10_11[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
// Definitions for Olimex LCD digits 8 and 9
|
||||||
|
#define a 0x01
|
||||||
|
#define b 0x02
|
||||||
|
#define c 0x04
|
||||||
|
#define d 0x80
|
||||||
|
#define e 0x40
|
||||||
|
#define f 0x10
|
||||||
|
#define g 0x20
|
||||||
|
#define h 0x08
|
||||||
|
// Character generator definition for display digits 8 and 9
|
||||||
|
const char char_gen_8_9[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
// Definitions for Olimex LCD digits 1 to 7. Here each digit definition require 2 bytes
|
||||||
|
#define a 0x0080
|
||||||
|
#define b 0x0040
|
||||||
|
#define c 0x0020
|
||||||
|
#define d 0x0010
|
||||||
|
#define e 0x2000
|
||||||
|
#define f 0x4000
|
||||||
|
#define g 0x0402
|
||||||
|
#define h 0x1000
|
||||||
|
// Character generator definition for display digits 1 to 7
|
||||||
|
const int char_gen_1_7[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// function prototypes
|
||||||
|
void Init(void); // Initializes device for the application
|
||||||
|
void ClearLCD(void); // Clears the LCD memory
|
||||||
|
int filterlp(int); // 17 tap lowpass FIR filter
|
||||||
|
int filterhp(int); // 17 tap highpass FIR filter
|
||||||
|
long mul16(register int x, register int y); // 16-bit signed multiplication
|
||||||
|
int itobcd(int i); // 16-bit hex to bcd conversion
|
||||||
|
|
||||||
|
// main function
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
Init(); // Initialize device for the application
|
||||||
|
LCDMEM[7] = 0x80; // Turn on LCD's Olimex row!!!
|
||||||
|
|
||||||
|
/*
|
||||||
|
// For debug purpose only!
|
||||||
|
for(unsigned char j=0;j<10;j++){
|
||||||
|
LCDMEM[2] = char_gen_10_11[j]; // LCD -> Digit 11
|
||||||
|
LCDMEM[3] = char_gen_10_11[j]; // LCD -> Digit 10
|
||||||
|
LCDMEM[4] = char_gen_8_9[j]; // LCD -> Digit 9
|
||||||
|
LCDMEM[5] = char_gen_8_9[j]; // LCD -> Digit 8
|
||||||
|
|
||||||
|
LCDMEM[7] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 7 High Byte
|
||||||
|
LCDMEM[6] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 7 Low Byte
|
||||||
|
LCDMEM[9] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 6 High Byte
|
||||||
|
LCDMEM[8] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 6 Low Byte
|
||||||
|
LCDMEM[11] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 5 High Byte
|
||||||
|
LCDMEM[10] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 5 Low Byte
|
||||||
|
//LCDMEM[13] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 4 High Byte
|
||||||
|
//LCDMEM[12] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 4 Low Byte
|
||||||
|
//LCDMEM[15] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 3 High Byte
|
||||||
|
//LCDMEM[14] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 3 Low Byte
|
||||||
|
//LCDMEM[17] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 2 High Byte
|
||||||
|
//LCDMEM[16] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 2 Low Byte
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
while(1)
|
||||||
|
{
|
||||||
|
__bis_SR_register(LPM0_bits); // Enter LPM0 needed for UART TX completion
|
||||||
|
__no_operation();
|
||||||
|
|
||||||
|
Dataout = filterlp(Datain); // Lowpass FIR filter for filtering out 60Hz
|
||||||
|
Dataout_pulse = filterhp(Dataout)-128; // Highpass FIR filter to filter muscle artifacts
|
||||||
|
Dataout = Dataout >> 6; // Scale Dataout to use scope program
|
||||||
|
if(Dataout > 255) Dataout = 255; // Set boundary 255 max
|
||||||
|
if(Dataout < 0) Dataout = 0; // Set boundary 0 min
|
||||||
|
//DAC12_0DAT = Dataout; // For scope display
|
||||||
|
|
||||||
|
|
||||||
|
if( 0 ) {
|
||||||
|
TXBUF0 = Dataout; // Transmit via UART0 for Scope display
|
||||||
|
} else {
|
||||||
|
// send the data as ascii values
|
||||||
|
TXBUF0 = (Dataout / 100) + 48; // hundreds
|
||||||
|
while (!(IFG1 & UTXIFG0)); // wait for transmission
|
||||||
|
TXBUF0 = ((Dataout / 10) % 10 ) + 48; // tens
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((Dataout / 1) % 10 ) + 48; // ones
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = 32; // send a blank
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((heartrate & 0xf00) >> 8) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((heartrate & 0xf0) >> 4) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = (heartrate & 0x0f) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = 10; // send a \n
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
counter++; // Debounce counter
|
||||||
|
pulseperiod++; // Pulse period counter
|
||||||
|
if (Dataout_pulse > 100) // Check if above threshold (48)
|
||||||
|
{
|
||||||
|
LCDMEM[1] = 0xF0; // Heart beat detected enable "<^>" on LCD
|
||||||
|
counter = 0; // Reset debounce counter
|
||||||
|
}
|
||||||
|
if (counter == 128) // Allow 128 sample debounce time
|
||||||
|
{
|
||||||
|
LCDMEM[1] = 0x00; // Disable "<^>" on LCD for blinking effect
|
||||||
|
beats++;
|
||||||
|
if (beats == 3)
|
||||||
|
{
|
||||||
|
beats = 0;
|
||||||
|
|
||||||
|
//heartrate_buffer[heartrate_cursor] = 50720/pulseperiod;
|
||||||
|
//heartrate_cursor++;
|
||||||
|
//heartrate_cursor = heartrate_cursor % 10;
|
||||||
|
|
||||||
|
//int ct;
|
||||||
|
//for(ct = 0; ct < 10; ct++) {
|
||||||
|
// heartrate_mean += heartrate_buffer[ct];
|
||||||
|
//}
|
||||||
|
//heartrate = itobcd(heartrate_mean / 10);
|
||||||
|
|
||||||
|
// heartrate = itobcd(30720/pulseperiod); // Calculate beat to beat heart rate per min
|
||||||
|
//heartrate = itobcd(92160/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
heartrate = itobcd(50720/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
//heartrate = (92160/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
pulseperiod = 0; // Reset pulse period for next measurement
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
///*
|
||||||
|
LCDMEM[2] = char_gen_10_11[heartrate & 0x0f]; // Display current heart rate units -> LCD Digit 11
|
||||||
|
LCDMEM[3] = char_gen_10_11[(heartrate & 0xf0) >> 4]; // tens -> LCD Digit 10
|
||||||
|
LCDMEM[4] = char_gen_8_9[(heartrate & 0xf00) >> 8]; // hundreds -> LCD Digit 9
|
||||||
|
|
||||||
|
LCDMEM[7] = ((char)(char_gen_1_7[heartrate & 0x0f]>>8)); // LCD -> Digit 7 High Byte
|
||||||
|
LCDMEM[6] = ((char)(char_gen_1_7[heartrate & 0x0f]&0x00FF)); // LCD -> Digit 7 Low Byte
|
||||||
|
LCDMEM[9] = ((char)(char_gen_1_7[((heartrate & 0xf0) >> 4)]>>8)); // LCD -> Digit 6 High Byte
|
||||||
|
LCDMEM[8] = ((char)(char_gen_1_7[((heartrate & 0xf0) >> 4)]&0x00FF)); // LCD -> Digit 6 Low Byte
|
||||||
|
LCDMEM[11] = ((char)(char_gen_1_7[((heartrate & 0xf00) >> 8)]>>8)); // LCD -> Digit 5 High Byte
|
||||||
|
LCDMEM[10] = ((char)(char_gen_1_7[((heartrate & 0xf00) >> 8)]&0x00FF)); // LCD -> Digit 5 Low Byte
|
||||||
|
//*/
|
||||||
|
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}//main
|
||||||
|
|
||||||
|
// Initialization function
|
||||||
|
void Init( void )
|
||||||
|
{
|
||||||
|
FLL_CTL0 |= XCAP10PF; // Set load capacitance for xtal
|
||||||
|
WDTCTL = WDTPW | WDTHOLD; // Disable the Watchdog
|
||||||
|
while ( LFOF & FLL_CTL0); // wait for watch crystal to stabilize
|
||||||
|
SCFQCTL = 63; // 32 x 32768 x 2 = 2.097152MHz
|
||||||
|
BTCTL = BT_fLCD_DIV128; // Set LCD frame freq = ACLK/128
|
||||||
|
// Initialize and enable LCD peripheral
|
||||||
|
ClearLCD(); // Clear LCD memory
|
||||||
|
LCDCTL = LCDSG0_3 + LCD4MUX + LCDON ; // 4mux LCD, segs0-23 enabled
|
||||||
|
// Initialize and enable GPIO ports
|
||||||
|
P1OUT = 0x00 + BIT3; // Clear P1OUT register, INA turned ON
|
||||||
|
P1DIR = 0x3f; // Unused pins as outputs, Comparator pins as inputs
|
||||||
|
P2OUT = 0x00; // Clear P2OUT register
|
||||||
|
P2DIR = 0xff; // Unused pins as outputs
|
||||||
|
P2DIR = ~(PB_2_0+PB_2_1); // P2.0 and P2.1 push buttons
|
||||||
|
P2IES = 0x00; // Interrupt edge low to high transition
|
||||||
|
P2IFG = 0x00; // Clear pending P2 interrupts
|
||||||
|
P2IE = PB_2_0 | PB_2_1; // Enable intterupts for push buttons
|
||||||
|
P3OUT = 0x00; // Clear P3OUT register
|
||||||
|
P3DIR = 0x0f; // Unused pins as outputs except P3.<4-7> -> For the new LCD's received at ~04.10.2012 this must be inputs!!
|
||||||
|
P4OUT = 0x00; // Clear P4OUT register
|
||||||
|
P4DIR = 0xff; // Unused pins as outputs
|
||||||
|
P5OUT = 0x00; // Clear P5OUT register
|
||||||
|
P5DIR = 0xff; // Unused pins as outputs
|
||||||
|
P5SEL = 0xfc; // Set Rxx and COM pins for LCD
|
||||||
|
P6OUT = 0x00; // Clear P6OUT register
|
||||||
|
P6SEL = 0xff; // P6 = Analog
|
||||||
|
// Initialize and enable UART
|
||||||
|
P2SEL|=BIT4; // P2.4 = TXD
|
||||||
|
UCTL0 |= SWRST; // UART SWRST = 1
|
||||||
|
ME1 |= UTXE0; // Enable UART0 TXD
|
||||||
|
UCTL0 |= CHAR; // 8-bit char, SWRST=1
|
||||||
|
UTCTL0 |= SSEL1; // UCLK = SMCLK
|
||||||
|
UBR00 = 18; // 115200 from 2.097152MHz
|
||||||
|
UBR10 = 0;
|
||||||
|
UMCTL0 = 0x2c; // Modulation = 0.2044
|
||||||
|
UCTL0 &= ~SWRST; // UART SWRST = 0, enable UART
|
||||||
|
IFG1 &= ~UTXIFG0;
|
||||||
|
// Initialize and enable ADC12
|
||||||
|
ADC12CTL0 = ADC12ON + SHT0_4 + REFON + REF2_5V;
|
||||||
|
// ADC12 ON, Reference = 2.5V for DAC0
|
||||||
|
ADC12CTL1 = SHP + SHS_1 + CONSEQ_2; // Use sampling timer, TA1 trigger
|
||||||
|
ADC12MCTL0 = INCH_1 + SREF_1; // Vref, channel = 1 = OA0 Out
|
||||||
|
ADC12IE = BIT0; // Enable interrupt for ADC12 MEM0
|
||||||
|
ADC12CTL0 |= ENC; // Enable conversions
|
||||||
|
// Initialize and enable Timer_A
|
||||||
|
TACTL = TASSEL0 + MC_1 + TACLR; // ACLK, Clear TAR, Up Mode
|
||||||
|
TACCTL1 = OUTMOD_2; // Set / Reset
|
||||||
|
TACCR0 = 63; // 512 samples per second
|
||||||
|
TACCR1 = 15; //
|
||||||
|
// Initialize and enable DAC12x
|
||||||
|
DAC12_0CTL = DAC12OPS + DAC12CALON + DAC12IR + DAC12AMP_2 + DAC12ENC;// DAC0 enable
|
||||||
|
DAC12_1CTL = DAC12CALON + DAC12IR + DAC12AMP_2 + DAC12ENC; // DAC1 enable
|
||||||
|
DAC12_1DAT = 0x099A; // Offset level = 1.5V for op amp bias
|
||||||
|
// Initialize and enable opamps
|
||||||
|
OA0CTL0 = OAP_1 + OAPM_1 + OAADC1; // OA0 enable power mode 1, OA0- = P6.0, 0A0+ = P6.2, OA0O = P6.1
|
||||||
|
OA0CTL1 = OARRIP; // General purpose mode, no Rail-to-Rail inputs
|
||||||
|
OA1CTL0 = OAP_3 + OAPM_1 + OAADC1; // OA1 enable power mode 1, OA1- = P6.4, OA1+ = DAC1, OA1O = P6.3
|
||||||
|
OA1CTL1 = OARRIP; // General purpose mode, no Rail-to-Rail inputs
|
||||||
|
OA2CTL0 = OAP_3 + OAPM_1 + OAADC1; // OA2 enable power mode 1, OA2+ = DAC1, OA2O = P6.5, Select inputs, power mode
|
||||||
|
OA2CTL1 = OAFC_1 + OARRIP; // Unit gain Mode, no Rail-to-Rail inputs
|
||||||
|
__enable_interrupt(); // Enable global Interrupts
|
||||||
|
} //init
|
||||||
|
|
||||||
|
void ClearLCD(void)
|
||||||
|
{
|
||||||
|
int i; //
|
||||||
|
for( i = 0; i < 20; i++){ // Clear LCDMEM
|
||||||
|
LCDMEM[i] = 0; //
|
||||||
|
}
|
||||||
|
}//clear LCD
|
||||||
|
|
||||||
|
int itobcd(int i) // Convert hex word to BCD.
|
||||||
|
{
|
||||||
|
int bcd = 0; //
|
||||||
|
char j = 0; //
|
||||||
|
|
||||||
|
while (i > 9) //
|
||||||
|
{
|
||||||
|
bcd |= ((i % 10) << j); //
|
||||||
|
i /= 10; //
|
||||||
|
j += 4;
|
||||||
|
} //
|
||||||
|
return (bcd | (i << j)); // Return converted value
|
||||||
|
}// itobcd(i)
|
||||||
|
|
||||||
|
|
||||||
|
int filterlp(int sample) // Lowpass FIR filter for EKG
|
||||||
|
{
|
||||||
|
static int buflp[32]; // Reserve 32 loactions for circular buffering
|
||||||
|
static int offsetlp = 0;
|
||||||
|
long z;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
buflp[offsetlp] = sample;
|
||||||
|
z = mul16(coeffslp[8], buflp[(offsetlp - 8) & 0x1F]);
|
||||||
|
|
||||||
|
__no_operation();
|
||||||
|
|
||||||
|
for (i = 0; i < 8; i++){
|
||||||
|
z += mul16(coeffslp[i], buflp[(offsetlp - i) & 0x1F] + buflp[(offsetlp - 16 + i) & 0x1F]);
|
||||||
|
}
|
||||||
|
|
||||||
|
offsetlp = (offsetlp + 1) & 0x1F;
|
||||||
|
return z >> 15; // Return filter output
|
||||||
|
}// int filter
|
||||||
|
|
||||||
|
int filterhp(int samplehp) // Highpass FIR filter for hear rate
|
||||||
|
{
|
||||||
|
static int bufhp[32]; // Reserve 32 loactions for circular buffering
|
||||||
|
static int offsethp = 0;
|
||||||
|
long z;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
bufhp[offsethp] = samplehp;
|
||||||
|
z = mul16(coeffshp[8], bufhp[(offsethp - 8) & 0x1F]);
|
||||||
|
|
||||||
|
for (i = 0; i < 8; i++){
|
||||||
|
z += mul16(coeffshp[i], bufhp[(offsethp - i) & 0x1F] + bufhp[(offsethp - 16 + i) & 0x1F]);
|
||||||
|
}
|
||||||
|
|
||||||
|
offsethp = (offsethp + 1) & 0x1F;
|
||||||
|
return z >> 15; // Return filter output
|
||||||
|
}// int filterhp
|
||||||
|
|
||||||
|
long mul16(register int x, register int y)
|
||||||
|
{
|
||||||
|
return ((long)x) * y;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#pragma vector = PORT2_VECTOR
|
||||||
|
__interrupt void Port2ISR (void)
|
||||||
|
{
|
||||||
|
P2IFG = 0;
|
||||||
|
}//Push buttons unused
|
||||||
|
|
||||||
|
#pragma vector = ADC_VECTOR // ADC12 ISR
|
||||||
|
__interrupt void ADC12ISR (void)
|
||||||
|
{
|
||||||
|
Datain = ADC12MEM0; // Store converted value in Datain
|
||||||
|
__bic_SR_register_on_exit(LPM0_bits); // Exit LPM0 on return
|
||||||
|
}// ADC12ISR
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,91 @@
|
||||||
|
#
|
||||||
|
# Makefile for msp430
|
||||||
|
#
|
||||||
|
# 'make' builds everything
|
||||||
|
# 'make clean' deletes everything except source files and Makefile
|
||||||
|
# You need to set TARGET, MCU and SOURCES for your project.
|
||||||
|
# TARGET is the name of the executable file to be produced
|
||||||
|
# $(TARGET).elf $(TARGET).hex and $(TARGET).txt nad $(TARGET).map are all generated.
|
||||||
|
# The TXT file is used for BSL loading, the ELF can be used for JTAG use
|
||||||
|
#
|
||||||
|
TARGET = mod-pulse-ekg
|
||||||
|
MCU = msp430fg439
|
||||||
|
|
||||||
|
# List all the source files here
|
||||||
|
# eg if you have a source file foo.c then list it here
|
||||||
|
SOURCES = MOD-EKG_DemoSoft.c
|
||||||
|
# Include are located in the Include directory
|
||||||
|
INCLUDES = -IInclude
|
||||||
|
|
||||||
|
# Add or subtract whatever MSPGCC flags you want. There are plenty more
|
||||||
|
#######################################################################################
|
||||||
|
CFLAGS = -mmcu=$(MCU) -g -Os -Wall -Wunused $(INCLUDES)
|
||||||
|
ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp -Wa,-gstabs
|
||||||
|
LDFLAGS = -mmcu=$(MCU) -Wl,-Map=$(TARGET).map -lm -lfp -pipe
|
||||||
|
########################################################################################
|
||||||
|
CC = msp430-gcc
|
||||||
|
LD = msp430-ld
|
||||||
|
AR = msp430-ar
|
||||||
|
AS = msp430-gcc
|
||||||
|
GASP = msp430-gasp
|
||||||
|
NM = msp430-nm
|
||||||
|
OBJCOPY = msp430-objcopy
|
||||||
|
RANLIB = msp430-ranlib
|
||||||
|
STRIP = msp430-strip
|
||||||
|
SIZE = msp430-size
|
||||||
|
READELF = msp430-readelf
|
||||||
|
MAKETXT = srec_cat
|
||||||
|
CP = cp -p
|
||||||
|
RM = rm -f
|
||||||
|
MV = mv
|
||||||
|
########################################################################################
|
||||||
|
# the file which will include dependencies
|
||||||
|
|
||||||
|
DEPEND = $(SOURCES:.c=.d)
|
||||||
|
|
||||||
|
# all the object files
|
||||||
|
OBJECTS = $(SOURCES:.c=.o)
|
||||||
|
|
||||||
|
#all: $(TARGET).elf $(TARGET).hex $(TARGET).txt
|
||||||
|
all: $(TARGET).elf $(TARGET).hex
|
||||||
|
$(TARGET).elf: $(OBJECTS)
|
||||||
|
echo "Linking $@"
|
||||||
|
$(CC) $(OBJECTS) $(LDFLAGS) $(LIBS) -o $@
|
||||||
|
echo
|
||||||
|
echo ">>>> Size of Firmware <<<<"
|
||||||
|
$(SIZE) $(TARGET).elf
|
||||||
|
echo
|
||||||
|
|
||||||
|
%.hex: %.elf
|
||||||
|
$(OBJCOPY) -O ihex $< $@
|
||||||
|
|
||||||
|
#%.txt: %.hex
|
||||||
|
# $(MAKETXT) -O $@ -TITXT $< -I
|
||||||
|
# unix2dos $(TARGET).txt
|
||||||
|
# The above line is required for the DOS based TI BSL tool to be able to read the txt file generated from linux/unix systems.
|
||||||
|
|
||||||
|
%.o: %.c
|
||||||
|
echo "Compiling $<"
|
||||||
|
$(CC) -c $(CFLAGS) -o $@ $<
|
||||||
|
|
||||||
|
# rule for making assembler source listing, to see the code
|
||||||
|
%.lst: %.c
|
||||||
|
$(CC) -c $(ASFLAGS) -Wa,-anlhd $< > $@
|
||||||
|
|
||||||
|
# include the dependencies unless we're going to clean, then forget about them.
|
||||||
|
ifneq ($(MAKECMDGOALS), clean)
|
||||||
|
-include $(DEPEND)
|
||||||
|
endif
|
||||||
|
# dependencies file
|
||||||
|
# includes also considered, since some of these are our own
|
||||||
|
# (otherwise use -MM instead of -M)
|
||||||
|
%.d: %.c
|
||||||
|
echo "Generating dependencies $@ from $<"
|
||||||
|
$(CC) -M ${CFLAGS} $< >$@
|
||||||
|
.SILENT:
|
||||||
|
.PHONY: clean
|
||||||
|
clean:
|
||||||
|
-$(RM) $(OBJECTS)
|
||||||
|
-$(RM) $(TARGET).*
|
||||||
|
-$(RM) $(SOURCES:.c=.lst)
|
||||||
|
-$(RM) $(DEPEND)
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
msp430-gcc -I/usr/msp430/include -Wall mod_ -mmcu=msp430fg439 -o mod-ekg-pyschose -L /usr/msp430/lib/ldscripts/msp430fg439 -lm -lfp -pipe
|
||||||
|
|
||||||
|
|
@ -0,0 +1,571 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<project>
|
||||||
|
<fileVersion>2</fileVersion>
|
||||||
|
<configuration>
|
||||||
|
<name>Debug</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>MSP430</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>1</debug>
|
||||||
|
<settings>
|
||||||
|
<name>C-SPY</name>
|
||||||
|
<archiveVersion>4</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>23</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessor</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToName</name>
|
||||||
|
<state>main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DynDriver</name>
|
||||||
|
<state>430FET</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>dDllSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileName</name>
|
||||||
|
<state>$TOOLKIT_DIR$\config\MSP430FG439.ddf</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcTMS</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcMSP430X</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerDataModel</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IVBASE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CPUTAG</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>430FET</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>15</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CFetMandatory</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Erase</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUVerifyDownloadP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EraseOptionSlaveP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExitBreakpointP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PutcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GetcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ParallelPortP7</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetVoltage</name>
|
||||||
|
<state>3.3</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowLockedFlashAccessP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUAttach</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AttachOptionSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OProtocolTypeDefault</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioProtocolType</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRadioModuleTypeSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EEMLevel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DiasbleMemoryCache</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>NeedLockedFlashAccess</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UsbComPort</name>
|
||||||
|
<state>Automatic</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FetConnection</name>
|
||||||
|
<version>1</version>
|
||||||
|
<state>6</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SoftwareBreakpointEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioSoftwareBreakpointType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetSettlingtime</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowAccessToBSL</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>SIM430</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>3</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>SimOddAddressCheckP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CSimMandatory</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeSim</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<debuggerPlugins>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\Lcd\lcd.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
</debuggerPlugins>
|
||||||
|
</configuration>
|
||||||
|
<configuration>
|
||||||
|
<name>Release</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>MSP430</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>0</debug>
|
||||||
|
<settings>
|
||||||
|
<name>C-SPY</name>
|
||||||
|
<archiveVersion>4</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>23</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>CInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessor</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToName</name>
|
||||||
|
<state>main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DynDriver</name>
|
||||||
|
<state>SIM430</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>dDllSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileName</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcTMS</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcMSP430X</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerDataModel</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IVBASE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CPUTAG</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>430FET</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>15</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>CFetMandatory</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Erase</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUVerifyDownloadP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EraseOptionSlaveP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExitBreakpointP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PutcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GetcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ParallelPortP7</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetVoltage</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowLockedFlashAccessP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUAttach</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AttachOptionSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OProtocolTypeDefault</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioProtocolType</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRadioModuleTypeSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EEMLevel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DiasbleMemoryCache</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>NeedLockedFlashAccess</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UsbComPort</name>
|
||||||
|
<state>Automatic</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FetConnection</name>
|
||||||
|
<version>1</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SoftwareBreakpointEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioSoftwareBreakpointType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetSettlingtime</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowAccessToBSL</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>SIM430</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>3</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>SimOddAddressCheckP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CSimMandatory</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeSim</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<debuggerPlugins>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\Lcd\lcd.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
</debuggerPlugins>
|
||||||
|
</configuration>
|
||||||
|
</project>
|
||||||
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,436 @@
|
||||||
|
//*****************************************************************************
|
||||||
|
// MSP430FG439-Heart Rate Monitor Demo
|
||||||
|
//
|
||||||
|
// Description; Uses one Instrumentation Amplifier INA321 and the three
|
||||||
|
// internal opamps of the MSP430FG439
|
||||||
|
//
|
||||||
|
// Murugavel Raju
|
||||||
|
// Texas Instruments, Inc
|
||||||
|
// October 2004
|
||||||
|
// Edited by: M Morales, November 2008
|
||||||
|
// * Updated to non-depracated intrinsic functions
|
||||||
|
// * Changed spacing for legibility
|
||||||
|
// Edited by:
|
||||||
|
// Penko T. Bozhkov - Olimex LTD, 05.10.2012
|
||||||
|
// * RTC capcitors changed according to Olimex's crystall requirements
|
||||||
|
// * Olimex LCD definitions are added and heart rate is visualized at 2 places on LCD
|
||||||
|
// Built with IAR Embedded Workbench Version: 4.21
|
||||||
|
//*****************************************************************************
|
||||||
|
//*****************************************************************************
|
||||||
|
// THIS PROGRAM IS PROVIDED "AS IS". TI MAKES NO WARRANTIES OR
|
||||||
|
// REPRESENTATIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
|
||||||
|
// INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||||
|
// FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR
|
||||||
|
// COMPLETENESS OF RESPONSES, RESULTS AND LACK OF NEGLIGENCE.
|
||||||
|
// TI DISCLAIMS ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET
|
||||||
|
// POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
|
||||||
|
// INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE PROGRAM OR
|
||||||
|
// YOUR USE OF THE PROGRAM.
|
||||||
|
//
|
||||||
|
// IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
|
||||||
|
// CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY
|
||||||
|
// THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED
|
||||||
|
// OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN ANY WAY OUT
|
||||||
|
// OF THIS AGREEMENT, THE PROGRAM, OR YOUR USE OF THE PROGRAM.
|
||||||
|
// EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
|
||||||
|
// REMOVAL OR REINSTALLATION, COMPUTER TIME, LABOR COSTS, LOSS
|
||||||
|
// OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR LOSS OF
|
||||||
|
// USE OR INTERRUPTION OF BUSINESS. IN NO EVENT WILL TI'S
|
||||||
|
// AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
|
||||||
|
// YOUR USE OF THE PROGRAM EXCEED FIVE HUNDRED DOLLARS
|
||||||
|
// (U.S.$500).
|
||||||
|
//
|
||||||
|
// Unless otherwise stated, the Program written and copyrighted
|
||||||
|
// by Texas Instruments is distributed as "freeware". You may,
|
||||||
|
// only under TI's copyright in the Program, use and modify the
|
||||||
|
// Program without any charge or restriction. You may
|
||||||
|
// distribute to third parties, provided that you transfer a
|
||||||
|
// copy of this license to the third party and the third party
|
||||||
|
// agrees to these terms by its first use of the Program. You
|
||||||
|
// must reproduce the copyright notice and any other legend of
|
||||||
|
// ownership on each copy or partial copy, of the Program.
|
||||||
|
//
|
||||||
|
// You acknowledge and agree that the Program contains
|
||||||
|
// copyrighted material, trade secrets and other TI proprietary
|
||||||
|
// information and is protected by copyright laws,
|
||||||
|
// international copyright treaties, and trade secret laws, as
|
||||||
|
// well as other intellectual property laws. To protect TI's
|
||||||
|
// rights in the Program, you agree not to decompile, reverse
|
||||||
|
// engineer, disassemble or otherwise translate any object code
|
||||||
|
// versions of the Program to a human-readable form. You agree
|
||||||
|
// that in no event will you alter, remove or destroy any
|
||||||
|
// copyright notice included in the Program. TI reserves all
|
||||||
|
// rights not specifically granted under this license. Except
|
||||||
|
// as specifically provided herein, nothing in this agreement
|
||||||
|
// shall be construed as conferring by implication, estoppel,
|
||||||
|
// or otherwise, upon you, any license or other right under any
|
||||||
|
// TI patents, copyrights or trade secrets.
|
||||||
|
//
|
||||||
|
// You may not use the Program in non-TI devices.
|
||||||
|
//*****************************************************************************
|
||||||
|
#include <msp430xG43x.h>
|
||||||
|
#include "math.h"
|
||||||
|
//defines
|
||||||
|
#define PB_2_0 (1 << 0) // Push Button on P2.0
|
||||||
|
#define PB_2_1 (1 << 1) // Push Button on P2.1
|
||||||
|
|
||||||
|
// variables declaration
|
||||||
|
static char beats;
|
||||||
|
int i=0, first_detection=0;
|
||||||
|
long result = 0;
|
||||||
|
int Datain, Dataout, Dataout_pulse, pulseperiod, counter, heartrate;
|
||||||
|
int Heart_Rate_Buffer[] = {0,0,0,0};
|
||||||
|
// Lowpass FIR filter coefficients for 17 taps to filter > 30Hz
|
||||||
|
static const int coeffslp[9] = {
|
||||||
|
5225, 5175, 7255, 9453, 11595, 13507, 15016, 15983, 16315 };
|
||||||
|
// Highpass FIR filter coefficients for 17 taps to filter < 2Hz
|
||||||
|
static const int coeffshp[9] = {
|
||||||
|
-763, -1267, -1091, -1867, -1969, -2507, -2619, -2911, 29908 };
|
||||||
|
|
||||||
|
// *******************************************
|
||||||
|
// Definitions related to Olimex LCD Digits!!!!
|
||||||
|
// *******************************************
|
||||||
|
// Definitions for Olimex LCD digits 10 and 11
|
||||||
|
#define a 0x10
|
||||||
|
#define b 0x01
|
||||||
|
#define c 0x04
|
||||||
|
#define d 0x08
|
||||||
|
#define e 0x40
|
||||||
|
#define f 0x20
|
||||||
|
#define g 0x02
|
||||||
|
#define h 0x80
|
||||||
|
// Character generator definition for display digits 10 and 11
|
||||||
|
const char char_gen_10_11[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
// Definitions for Olimex LCD digits 8 and 9
|
||||||
|
#define a 0x01
|
||||||
|
#define b 0x02
|
||||||
|
#define c 0x04
|
||||||
|
#define d 0x80
|
||||||
|
#define e 0x40
|
||||||
|
#define f 0x10
|
||||||
|
#define g 0x20
|
||||||
|
#define h 0x08
|
||||||
|
// Character generator definition for display digits 8 and 9
|
||||||
|
const char char_gen_8_9[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
// Definitions for Olimex LCD digits 1 to 7. Here each digit definition require 2 bytes
|
||||||
|
#define a 0x0080
|
||||||
|
#define b 0x0040
|
||||||
|
#define c 0x0020
|
||||||
|
#define d 0x0010
|
||||||
|
#define e 0x2000
|
||||||
|
#define f 0x4000
|
||||||
|
#define g 0x0402
|
||||||
|
#define h 0x1000
|
||||||
|
// Character generator definition for display digits 1 to 7
|
||||||
|
const int char_gen_1_7[] = {
|
||||||
|
a+b+c+d+e+f, // 0 Displays "0"
|
||||||
|
b+c, // 1 Displays "1"
|
||||||
|
a+b+d+e+g, // 2 Displays "2"
|
||||||
|
a+b+c+d+g, // 3 Displays "3"
|
||||||
|
b+c+f+g, // 4 Displays "4"
|
||||||
|
a+c+d+f+g, // 5 Displays "5"
|
||||||
|
a+c+d+e+f+g, // 6 Displays "6"
|
||||||
|
a+b+c, // 7 Displays "7"
|
||||||
|
a+b+c+d+e+f+g, // 8 Displays "8"
|
||||||
|
a+b+c+d+f+g, // 9 Displays "9"
|
||||||
|
};
|
||||||
|
// undefines
|
||||||
|
#undef a
|
||||||
|
#undef b
|
||||||
|
#undef c
|
||||||
|
#undef d
|
||||||
|
#undef e
|
||||||
|
#undef f
|
||||||
|
#undef g
|
||||||
|
#undef h
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// function prototypes
|
||||||
|
void Init(void); // Initializes device for the application
|
||||||
|
void ClearLCD(void); // Clears the LCD memory
|
||||||
|
int filterlp(int); // 17 tap lowpass FIR filter
|
||||||
|
int filterhp(int); // 17 tap highpass FIR filter
|
||||||
|
long mul16(register int x, register int y); // 16-bit signed multiplication
|
||||||
|
int itobcd(int i); // 16-bit hex to bcd conversion
|
||||||
|
// main function
|
||||||
|
void main(void)
|
||||||
|
{
|
||||||
|
Init(); // Initialize device for the application
|
||||||
|
LCDMEM[7] = 0x80; // Turn on LCD's Olimex row!!!
|
||||||
|
|
||||||
|
/*
|
||||||
|
// For debug purpose only!
|
||||||
|
for(unsigned char j=0;j<10;j++){
|
||||||
|
LCDMEM[2] = char_gen_10_11[j]; // LCD -> Digit 11
|
||||||
|
LCDMEM[3] = char_gen_10_11[j]; // LCD -> Digit 10
|
||||||
|
LCDMEM[4] = char_gen_8_9[j]; // LCD -> Digit 9
|
||||||
|
LCDMEM[5] = char_gen_8_9[j]; // LCD -> Digit 8
|
||||||
|
|
||||||
|
LCDMEM[7] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 7 High Byte
|
||||||
|
LCDMEM[6] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 7 Low Byte
|
||||||
|
LCDMEM[9] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 6 High Byte
|
||||||
|
LCDMEM[8] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 6 Low Byte
|
||||||
|
LCDMEM[11] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 5 High Byte
|
||||||
|
LCDMEM[10] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 5 Low Byte
|
||||||
|
//LCDMEM[13] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 4 High Byte
|
||||||
|
//LCDMEM[12] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 4 Low Byte
|
||||||
|
//LCDMEM[15] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 3 High Byte
|
||||||
|
//LCDMEM[14] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 3 Low Byte
|
||||||
|
//LCDMEM[17] = ((char)(char_gen_1_7[j]>>8)); // LCD -> Digit 2 High Byte
|
||||||
|
//LCDMEM[16] = ((char)(char_gen_1_7[j]&0x00FF)); // LCD -> Digit 2 Low Byte
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
while(1)
|
||||||
|
{
|
||||||
|
__bis_SR_register(LPM0_bits); // Enter LPM0 needed for UART TX completion
|
||||||
|
__no_operation();
|
||||||
|
|
||||||
|
Dataout = filterlp(Datain); // Lowpass FIR filter for filtering out 60Hz
|
||||||
|
Dataout_pulse = filterhp(Dataout)-128; // Highpass FIR filter to filter muscle artifacts
|
||||||
|
Dataout = Dataout >> 6; // Scale Dataout to use scope program
|
||||||
|
if(Dataout > 255) Dataout = 255; // Set boundary 255 max
|
||||||
|
if(Dataout < 0) Dataout = 0; // Set boundary 0 min
|
||||||
|
//DAC12_0DAT = Dataout; // For scope display
|
||||||
|
//TXBUF0 = Dataout; // Transmit via UART0 for Scope display
|
||||||
|
|
||||||
|
// send the data as ascii values
|
||||||
|
TXBUF0 = (Dataout / 100) + 48; // hundreds
|
||||||
|
while (!(IFG1 & UTXIFG0)); // wait for transmission
|
||||||
|
TXBUF0 = ((Dataout / 10) % 10 ) + 48; // tens
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((Dataout / 1) % 10 ) + 48; // ones
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = 32; // send a blank
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((heartrate & 0xf00) >> 8) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = ((heartrate & 0xf0) >> 4) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = (heartrate & 0x0f) + 48;
|
||||||
|
while (!(IFG1 & UTXIFG0));
|
||||||
|
TXBUF0 = 10; // send a \n
|
||||||
|
|
||||||
|
|
||||||
|
counter++; // Debounce counter
|
||||||
|
pulseperiod++; // Pulse period counter
|
||||||
|
if (Dataout_pulse > 110) // Check if above threshold (48)
|
||||||
|
{
|
||||||
|
LCDMEM[1] = 0xF0; // Heart beat detected enable "<^>" on LCD
|
||||||
|
counter = 0; // Reset debounce counter
|
||||||
|
}
|
||||||
|
if (counter == 128) // Allow 128 sample debounce time
|
||||||
|
{
|
||||||
|
LCDMEM[1] = 0x00; // Disable "<^>" on LCD for blinking effect
|
||||||
|
beats++;
|
||||||
|
if (beats == 3)
|
||||||
|
{
|
||||||
|
beats = 0;
|
||||||
|
// heartrate = itobcd(30720/pulseperiod); // Calculate beat to beat heart rate per min
|
||||||
|
//heartrate = itobcd(92160/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
heartrate = itobcd(50720/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
//heartrate = (92160/pulseperiod); // Calculate 3 beat average heart rate per min
|
||||||
|
pulseperiod = 0; // Reset pulse period for next measurement
|
||||||
|
|
||||||
|
///*
|
||||||
|
LCDMEM[2] = char_gen_10_11[heartrate & 0x0f]; // Display current heart rate units -> LCD Digit 11
|
||||||
|
LCDMEM[3] = char_gen_10_11[(heartrate & 0xf0) >> 4]; // tens -> LCD Digit 10
|
||||||
|
LCDMEM[4] = char_gen_8_9[(heartrate & 0xf00) >> 8]; // hundreds -> LCD Digit 9
|
||||||
|
|
||||||
|
LCDMEM[7] = ((char)(char_gen_1_7[heartrate & 0x0f]>>8)); // LCD -> Digit 7 High Byte
|
||||||
|
LCDMEM[6] = ((char)(char_gen_1_7[heartrate & 0x0f]&0x00FF)); // LCD -> Digit 7 Low Byte
|
||||||
|
LCDMEM[9] = ((char)(char_gen_1_7[((heartrate & 0xf0) >> 4)]>>8)); // LCD -> Digit 6 High Byte
|
||||||
|
LCDMEM[8] = ((char)(char_gen_1_7[((heartrate & 0xf0) >> 4)]&0x00FF)); // LCD -> Digit 6 Low Byte
|
||||||
|
LCDMEM[11] = ((char)(char_gen_1_7[((heartrate & 0xf00) >> 8)]>>8)); // LCD -> Digit 5 High Byte
|
||||||
|
LCDMEM[10] = ((char)(char_gen_1_7[((heartrate & 0xf00) >> 8)]&0x00FF)); // LCD -> Digit 5 Low Byte
|
||||||
|
//*/
|
||||||
|
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}//main
|
||||||
|
|
||||||
|
// Initialization function
|
||||||
|
void Init( void )
|
||||||
|
{
|
||||||
|
FLL_CTL0 |= XCAP10PF; // Set load capacitance for xtal
|
||||||
|
WDTCTL = WDTPW | WDTHOLD; // Disable the Watchdog
|
||||||
|
while ( LFOF & FLL_CTL0); // wait for watch crystal to stabilize
|
||||||
|
SCFQCTL = 63; // 32 x 32768 x 2 = 2.097152MHz
|
||||||
|
BTCTL = BT_fLCD_DIV128; // Set LCD frame freq = ACLK/128
|
||||||
|
// Initialize and enable LCD peripheral
|
||||||
|
ClearLCD(); // Clear LCD memory
|
||||||
|
LCDCTL = LCDSG0_3 + LCD4MUX + LCDON ; // 4mux LCD, segs0-23 enabled
|
||||||
|
// Initialize and enable GPIO ports
|
||||||
|
P1OUT = 0x00 + BIT3; // Clear P1OUT register, INA turned ON
|
||||||
|
P1DIR = 0x3f; // Unused pins as outputs, Comparator pins as inputs
|
||||||
|
P2OUT = 0x00; // Clear P2OUT register
|
||||||
|
P2DIR = 0xff; // Unused pins as outputs
|
||||||
|
P2DIR = ~(PB_2_0+PB_2_1); // P2.0 and P2.1 push buttons
|
||||||
|
P2IES = 0x00; // Interrupt edge low to high transition
|
||||||
|
P2IFG = 0x00; // Clear pending P2 interrupts
|
||||||
|
P2IE = PB_2_0 | PB_2_1; // Enable intterupts for push buttons
|
||||||
|
P3OUT = 0x00; // Clear P3OUT register
|
||||||
|
P3DIR = 0x0f; // Unused pins as outputs except P3.<4-7> -> For the new LCD's received at ~04.10.2012 this must be inputs!!
|
||||||
|
P4OUT = 0x00; // Clear P4OUT register
|
||||||
|
P4DIR = 0xff; // Unused pins as outputs
|
||||||
|
P5OUT = 0x00; // Clear P5OUT register
|
||||||
|
P5DIR = 0xff; // Unused pins as outputs
|
||||||
|
P5SEL = 0xfc; // Set Rxx and COM pins for LCD
|
||||||
|
P6OUT = 0x00; // Clear P6OUT register
|
||||||
|
P6SEL = 0xff; // P6 = Analog
|
||||||
|
// Initialize and enable UART
|
||||||
|
P2SEL|=BIT4; // P2.4 = TXD
|
||||||
|
UCTL0 |= SWRST; // UART SWRST = 1
|
||||||
|
ME1 |= UTXE0; // Enable UART0 TXD
|
||||||
|
UCTL0 |= CHAR; // 8-bit char, SWRST=1
|
||||||
|
UTCTL0 |= SSEL1; // UCLK = SMCLK
|
||||||
|
UBR00 = 18; // 115200 from 2.097152MHz
|
||||||
|
UBR10 = 0;
|
||||||
|
UMCTL0 = 0x2c; // Modulation = 0.2044
|
||||||
|
UCTL0 &= ~SWRST; // UART SWRST = 0, enable UART
|
||||||
|
IFG1 &= ~UTXIFG0;
|
||||||
|
// Initialize and enable ADC12
|
||||||
|
ADC12CTL0 = ADC12ON + SHT0_4 + REFON + REF2_5V;
|
||||||
|
// ADC12 ON, Reference = 2.5V for DAC0
|
||||||
|
ADC12CTL1 = SHP + SHS_1 + CONSEQ_2; // Use sampling timer, TA1 trigger
|
||||||
|
ADC12MCTL0 = INCH_1 + SREF_1; // Vref, channel = 1 = OA0 Out
|
||||||
|
ADC12IE = BIT0; // Enable interrupt for ADC12 MEM0
|
||||||
|
ADC12CTL0 |= ENC; // Enable conversions
|
||||||
|
// Initialize and enable Timer_A
|
||||||
|
TACTL = TASSEL0 + MC_1 + TACLR; // ACLK, Clear TAR, Up Mode
|
||||||
|
TACCTL1 = OUTMOD_2; // Set / Reset
|
||||||
|
TACCR0 = 63; // 512 samples per second
|
||||||
|
TACCR1 = 15; //
|
||||||
|
// Initialize and enable DAC12x
|
||||||
|
DAC12_0CTL = DAC12OPS + DAC12CALON + DAC12IR + DAC12AMP_2 + DAC12ENC;// DAC0 enable
|
||||||
|
DAC12_1CTL = DAC12CALON + DAC12IR + DAC12AMP_2 + DAC12ENC; // DAC1 enable
|
||||||
|
DAC12_1DAT = 0x099A; // Offset level = 1.5V for op amp bias
|
||||||
|
// Initialize and enable opamps
|
||||||
|
OA0CTL0 = OAP_1 + OAPM_1 + OAADC1; // OA0 enable power mode 1, OA0- = P6.0, 0A0+ = P6.2, OA0O = P6.1
|
||||||
|
OA0CTL1 = OARRIP; // General purpose mode, no Rail-to-Rail inputs
|
||||||
|
OA1CTL0 = OAP_3 + OAPM_1 + OAADC1; // OA1 enable power mode 1, OA1- = P6.4, OA1+ = DAC1, OA1O = P6.3
|
||||||
|
OA1CTL1 = OARRIP; // General purpose mode, no Rail-to-Rail inputs
|
||||||
|
OA2CTL0 = OAP_3 + OAPM_1 + OAADC1; // OA2 enable power mode 1, OA2+ = DAC1, OA2O = P6.5, Select inputs, power mode
|
||||||
|
OA2CTL1 = OAFC_1 + OARRIP; // Unit gain Mode, no Rail-to-Rail inputs
|
||||||
|
__enable_interrupt(); // Enable global Interrupts
|
||||||
|
} //init
|
||||||
|
|
||||||
|
void ClearLCD(void)
|
||||||
|
{
|
||||||
|
int i; //
|
||||||
|
for( i = 0; i < 20; i++){ // Clear LCDMEM
|
||||||
|
LCDMEM[i] = 0; //
|
||||||
|
}
|
||||||
|
}//clear LCD
|
||||||
|
|
||||||
|
int itobcd(int i) // Convert hex word to BCD.
|
||||||
|
{
|
||||||
|
int bcd = 0; //
|
||||||
|
char j = 0; //
|
||||||
|
|
||||||
|
while (i > 9) //
|
||||||
|
{
|
||||||
|
bcd |= ((i % 10) << j); //
|
||||||
|
i /= 10; //
|
||||||
|
j += 4;
|
||||||
|
} //
|
||||||
|
return (bcd | (i << j)); // Return converted value
|
||||||
|
}// itobcd(i)
|
||||||
|
|
||||||
|
|
||||||
|
int filterlp(int sample) // Lowpass FIR filter for EKG
|
||||||
|
{
|
||||||
|
static int buflp[32]; // Reserve 32 loactions for circular buffering
|
||||||
|
static int offsetlp = 0;
|
||||||
|
long z;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
buflp[offsetlp] = sample;
|
||||||
|
z = mul16(coeffslp[8], buflp[(offsetlp - 8) & 0x1F]);
|
||||||
|
|
||||||
|
__no_operation();
|
||||||
|
|
||||||
|
for (i = 0; i < 8; i++){
|
||||||
|
z += mul16(coeffslp[i], buflp[(offsetlp - i) & 0x1F] + buflp[(offsetlp - 16 + i) & 0x1F]);
|
||||||
|
}
|
||||||
|
|
||||||
|
offsetlp = (offsetlp + 1) & 0x1F;
|
||||||
|
return z >> 15; // Return filter output
|
||||||
|
}// int filter
|
||||||
|
|
||||||
|
int filterhp(int samplehp) // Highpass FIR filter for hear rate
|
||||||
|
{
|
||||||
|
static int bufhp[32]; // Reserve 32 loactions for circular buffering
|
||||||
|
static int offsethp = 0;
|
||||||
|
long z;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
bufhp[offsethp] = samplehp;
|
||||||
|
z = mul16(coeffshp[8], bufhp[(offsethp - 8) & 0x1F]);
|
||||||
|
|
||||||
|
for (i = 0; i < 8; i++){
|
||||||
|
z += mul16(coeffshp[i], bufhp[(offsethp - i) & 0x1F] + bufhp[(offsethp - 16 + i) & 0x1F]);
|
||||||
|
}
|
||||||
|
|
||||||
|
offsethp = (offsethp + 1) & 0x1F;
|
||||||
|
return z >> 15; // Return filter output
|
||||||
|
}// int filterhp
|
||||||
|
|
||||||
|
#pragma vector = PORT2_VECTOR
|
||||||
|
__interrupt void Port2ISR (void)
|
||||||
|
{
|
||||||
|
P2IFG = 0;
|
||||||
|
}//Push buttons unused
|
||||||
|
|
||||||
|
#pragma vector = ADC_VECTOR // ADC12 ISR
|
||||||
|
__interrupt void ADC12ISR (void)
|
||||||
|
{
|
||||||
|
Datain = ADC12MEM0; // Store converted value in Datain
|
||||||
|
__bic_SR_register_on_exit(LPM0_bits); // Exit LPM0 on return
|
||||||
|
}// ADC12ISR
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,128 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<project>
|
||||||
|
<fileVersion>2</fileVersion>
|
||||||
|
<fileChecksum>475830264</fileChecksum>
|
||||||
|
<configuration>
|
||||||
|
<name>Debug</name>
|
||||||
|
<outputs>
|
||||||
|
<file>$PROJ_DIR$\MOD-EKG_DemoSoft.c</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\msp430xg43x.h</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.d43</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Obj\MOD-EKG_DemoSoft.pbd</file>
|
||||||
|
<file>$PROJ_DIR$\mul.s43</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\intrinsics.h</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Obj\MOD-EKG_DemoSoft.pbi</file>
|
||||||
|
<file>$TOOLKIT_DIR$\lib\dlib\dl430fn.h</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Obj\MOD-EKG_DemoSoft.r43</file>
|
||||||
|
<file>$TOOLKIT_DIR$\lib\dlib\dl430fn.r43</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\in430.h</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.ulp</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Obj\mul.r43</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\ymath.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\math.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\ycheck.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\DLib_Defaults.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\xencoding_limits.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\yvals.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\DLib_Threads.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\DLib_Product.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\inc\dlib\c\xtgmath.h</file>
|
||||||
|
<file>$TOOLKIT_DIR$\config\linker\lnk430fg439.xcl</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.a43</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.hex</file>
|
||||||
|
<file>$PROJ_DIR$\Debug\Exe\ekg.hex</file>
|
||||||
|
</outputs>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\MOD-EKG_DemoSoft.c</name>
|
||||||
|
<outputs>
|
||||||
|
<tool>
|
||||||
|
<name>BICOMP</name>
|
||||||
|
<file> 6</file>
|
||||||
|
</tool>
|
||||||
|
<tool>
|
||||||
|
<name>ICC430</name>
|
||||||
|
<file> 8</file>
|
||||||
|
</tool>
|
||||||
|
</outputs>
|
||||||
|
<inputs>
|
||||||
|
<tool>
|
||||||
|
<name>BICOMP</name>
|
||||||
|
<file> 1 10 5 14 15 13 18 16 7 20 17 19 21</file>
|
||||||
|
</tool>
|
||||||
|
<tool>
|
||||||
|
<name>ICC430</name>
|
||||||
|
<file> 1 10 5 14 15 13 18 16 7 20 17 19 21</file>
|
||||||
|
</tool>
|
||||||
|
</inputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.d43</name>
|
||||||
|
<inputs>
|
||||||
|
<tool>
|
||||||
|
<name>XLINK</name>
|
||||||
|
<file> 22 8 12 9</file>
|
||||||
|
</tool>
|
||||||
|
</inputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\mul.s43</name>
|
||||||
|
<outputs>
|
||||||
|
<tool>
|
||||||
|
<name>A430</name>
|
||||||
|
<file> 12</file>
|
||||||
|
</tool>
|
||||||
|
</outputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.a43</name>
|
||||||
|
<inputs>
|
||||||
|
<tool>
|
||||||
|
<name>XLINK</name>
|
||||||
|
<file> 22 8 12 9</file>
|
||||||
|
</tool>
|
||||||
|
</inputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\Debug\Exe\MOD-EKG_DemoSoft.hex</name>
|
||||||
|
<inputs>
|
||||||
|
<tool>
|
||||||
|
<name>XLINK</name>
|
||||||
|
<file> 22 8 12 9</file>
|
||||||
|
</tool>
|
||||||
|
</inputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>[ROOT_NODE]</name>
|
||||||
|
<outputs>
|
||||||
|
<tool>
|
||||||
|
<name>XLINK</name>
|
||||||
|
<file> 25</file>
|
||||||
|
</tool>
|
||||||
|
<tool>
|
||||||
|
<name>ULP430</name>
|
||||||
|
<file> 11</file>
|
||||||
|
</tool>
|
||||||
|
</outputs>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\Debug\Exe\ekg.hex</name>
|
||||||
|
<inputs>
|
||||||
|
<tool>
|
||||||
|
<name>XLINK</name>
|
||||||
|
<file> 22 8 12 9</file>
|
||||||
|
</tool>
|
||||||
|
</inputs>
|
||||||
|
</file>
|
||||||
|
</configuration>
|
||||||
|
<configuration>
|
||||||
|
<name>Release</name>
|
||||||
|
<outputs/>
|
||||||
|
<forcedrebuild>
|
||||||
|
<name>[MULTI_TOOL]</name>
|
||||||
|
<tool>XLINK</tool>
|
||||||
|
</forcedrebuild>
|
||||||
|
</configuration>
|
||||||
|
</project>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,819 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<project>
|
||||||
|
<fileVersion>2</fileVersion>
|
||||||
|
<configuration>
|
||||||
|
<name>Debug</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>MSP430</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>1</debug>
|
||||||
|
<settings>
|
||||||
|
<name>C-SPY</name>
|
||||||
|
<archiveVersion>4</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>27</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessor</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToName</name>
|
||||||
|
<state>main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DynDriver</name>
|
||||||
|
<state>430FET</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>dDllSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileName</name>
|
||||||
|
<state>$TOOLKIT_DIR$\config\debugger\MSP430FG439.ddf</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcTMS</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcMSP430X</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerDataModel</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IVBASE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CPUTAG</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>L092Mode</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ENERGYTRACE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FETIPE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>430FET</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>27</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>CFetMandatory</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Erase</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUVerifyDownloadP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EraseOptionSlaveP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExitBreakpointP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PutcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GetcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ParallelPortP7</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetVoltage</name>
|
||||||
|
<state>3.3</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowLockedFlashAccessP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUAttach</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AttachOptionSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioProtocolType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRadioModuleTypeSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EEMLevel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DiasbleMemoryCache</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>NeedLockedFlashAccess</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UsbComPort</name>
|
||||||
|
<state>Automatic</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FetConnection</name>
|
||||||
|
<version>3</version>
|
||||||
|
<state>6</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SoftwareBreakpointEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioSoftwareBreakpointType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetSettlingtime</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowAccessToBSL</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OTargetVccTypeDefault</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCBetaDll</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GPassword</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DebugLPM5</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LPM5Slave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioAutoManualType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExternalCodeDownload</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCVCCDefault</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Retain</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>jstatebit</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioJtagSpeedType</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>memoryTypeSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>fuseBlowDisabledSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>eraseTypeSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>SIM430</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>4</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>1</debug>
|
||||||
|
<option>
|
||||||
|
<name>SimOddAddressCheckP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CSimMandatory</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeSim</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimEnablePSP</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimPspOverrideConfig</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimPspConfigFile</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<debuggerPlugins>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\Lcd\lcd.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
</debuggerPlugins>
|
||||||
|
</configuration>
|
||||||
|
<configuration>
|
||||||
|
<name>Release</name>
|
||||||
|
<toolchain>
|
||||||
|
<name>MSP430</name>
|
||||||
|
</toolchain>
|
||||||
|
<debug>0</debug>
|
||||||
|
<settings>
|
||||||
|
<name>C-SPY</name>
|
||||||
|
<archiveVersion>4</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>27</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>CInput</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>MacFile</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IProcessor</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToEnable</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GoToName</name>
|
||||||
|
<state>main</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DynDriver</name>
|
||||||
|
<state>SIM430</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>dDllSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfOverride</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DdfFileName</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcTMS</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptionsCheck</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CExtraOptions</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ProcMSP430X</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CompilerDataModel</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>IVBASE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesSuppressCheck3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesPath3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CPUTAG</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>L092Mode</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset1</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset2</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesOffset3</name>
|
||||||
|
<state></state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse1</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse2</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OCImagesUse3</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ENERGYTRACE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FETIPE</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>430FET</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>27</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>CFetMandatory</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Erase</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUVerifyDownloadP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EraseOptionSlaveP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExitBreakpointP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>PutcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GetcharBreakpointP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ParallelPortP7</name>
|
||||||
|
<version>0</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetVoltage</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowLockedFlashAccessP7</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EMUAttach</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AttachOptionSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioProtocolType</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCRadioModuleTypeSlave</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>EEMLevel</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DiasbleMemoryCache</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>NeedLockedFlashAccess</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>UsbComPort</name>
|
||||||
|
<state>Automatic</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>FetConnection</name>
|
||||||
|
<version>3</version>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SoftwareBreakpointEnable</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioSoftwareBreakpointType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>TargetSettlingtime</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>AllowAccessToBSL</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>OTargetVccTypeDefault</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCBetaDll</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>GPassword</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>DebugLPM5</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>LPM5Slave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CRadioAutoManualType</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>ExternalCodeDownload</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CCVCCDefault</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>Retain</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>jstatebit</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>RadioJtagSpeedType</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>memoryTypeSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>fuseBlowDisabledSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>eraseTypeSlave</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<settings>
|
||||||
|
<name>SIM430</name>
|
||||||
|
<archiveVersion>1</archiveVersion>
|
||||||
|
<data>
|
||||||
|
<version>4</version>
|
||||||
|
<wantNonLocal>1</wantNonLocal>
|
||||||
|
<debug>0</debug>
|
||||||
|
<option>
|
||||||
|
<name>SimOddAddressCheckP7</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>CSimMandatory</name>
|
||||||
|
<state>1</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>derivativeSim</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimEnablePSP</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimPspOverrideConfig</name>
|
||||||
|
<state>0</state>
|
||||||
|
</option>
|
||||||
|
<option>
|
||||||
|
<name>SimPspConfigFile</name>
|
||||||
|
<state>###Uninitialized###</state>
|
||||||
|
</option>
|
||||||
|
</data>
|
||||||
|
</settings>
|
||||||
|
<debuggerPlugins>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\Lcd\lcd.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyPlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
|
||||||
|
<loadFlag>1</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
<plugin>
|
||||||
|
<file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
|
||||||
|
<loadFlag>0</loadFlag>
|
||||||
|
</plugin>
|
||||||
|
</debuggerPlugins>
|
||||||
|
</configuration>
|
||||||
|
</project>
|
||||||
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<workspace>
|
||||||
|
<project>
|
||||||
|
<path>$WS_DIR$\MOD-EKG_DemoSoft.ewp</path>
|
||||||
|
</project>
|
||||||
|
<batchBuild/>
|
||||||
|
</workspace>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,110 @@
|
||||||
|
//
|
||||||
|
//16x16=>32 multiply
|
||||||
|
//long mul16(register int x, register int y)
|
||||||
|
//
|
||||||
|
// Edited by: M Morales, November 2008
|
||||||
|
// * Updated calling conventions in support of IAR compiler >= 4.x
|
||||||
|
//*****************************************************************************
|
||||||
|
// THIS PROGRAM IS PROVIDED "AS IS". TI MAKES NO WARRANTIES OR
|
||||||
|
// REPRESENTATIONS, EITHER EXPRESS, IMPLIED OR STATUTORY,
|
||||||
|
// INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||||
|
// FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR
|
||||||
|
// COMPLETENESS OF RESPONSES, RESULTS AND LACK OF NEGLIGENCE.
|
||||||
|
// TI DISCLAIMS ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET
|
||||||
|
// POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY
|
||||||
|
// INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE PROGRAM OR
|
||||||
|
// YOUR USE OF THE PROGRAM.
|
||||||
|
//
|
||||||
|
// IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
|
||||||
|
// CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY
|
||||||
|
// THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED
|
||||||
|
// OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN ANY WAY OUT
|
||||||
|
// OF THIS AGREEMENT, THE PROGRAM, OR YOUR USE OF THE PROGRAM.
|
||||||
|
// EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
|
||||||
|
// REMOVAL OR REINSTALLATION, COMPUTER TIME, LABOR COSTS, LOSS
|
||||||
|
// OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR LOSS OF
|
||||||
|
// USE OR INTERRUPTION OF BUSINESS. IN NO EVENT WILL TI'S
|
||||||
|
// AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
|
||||||
|
// YOUR USE OF THE PROGRAM EXCEED FIVE HUNDRED DOLLARS
|
||||||
|
// (U.S.$500).
|
||||||
|
//
|
||||||
|
// Unless otherwise stated, the Program written and copyrighted
|
||||||
|
// by Texas Instruments is distributed as "freeware". You may,
|
||||||
|
// only under TI's copyright in the Program, use and modify the
|
||||||
|
// Program without any charge or restriction. You may
|
||||||
|
// distribute to third parties, provided that you transfer a
|
||||||
|
// copy of this license to the third party and the third party
|
||||||
|
// agrees to these terms by its first use of the Program. You
|
||||||
|
// must reproduce the copyright notice and any other legend of
|
||||||
|
// ownership on each copy or partial copy, of the Program.
|
||||||
|
//
|
||||||
|
// You acknowledge and agree that the Program contains
|
||||||
|
// copyrighted material, trade secrets and other TI proprietary
|
||||||
|
// information and is protected by copyright laws,
|
||||||
|
// international copyright treaties, and trade secret laws, as
|
||||||
|
// well as other intellectual property laws. To protect TI's
|
||||||
|
// rights in the Program, you agree not to decompile, reverse
|
||||||
|
// engineer, disassemble or otherwise translate any object code
|
||||||
|
// versions of the Program to a human-readable form. You agree
|
||||||
|
// that in no event will you alter, remove or destroy any
|
||||||
|
// copyright notice included in the Program. TI reserves all
|
||||||
|
// rights not specifically granted under this license. Except
|
||||||
|
// as specifically provided herein, nothing in this agreement
|
||||||
|
// shall be construed as conferring by implication, estoppel,
|
||||||
|
// or otherwise, upon you, any license or other right under any
|
||||||
|
// TI patents, copyrights or trade secrets.
|
||||||
|
//
|
||||||
|
// You may not use the Program in non-TI devices.
|
||||||
|
//*****************************************************************************
|
||||||
|
public mul16
|
||||||
|
|
||||||
|
RSEG CODE
|
||||||
|
mul16
|
||||||
|
|
||||||
|
#define x1 r9
|
||||||
|
#define z0 r14
|
||||||
|
#define z1 r15
|
||||||
|
#define x r12
|
||||||
|
#define y r13
|
||||||
|
|
||||||
|
push r9
|
||||||
|
|
||||||
|
clr z0
|
||||||
|
mov z0,z1
|
||||||
|
mov z0,x1
|
||||||
|
tst x
|
||||||
|
jge xbooth_2
|
||||||
|
mov #-1,x1
|
||||||
|
jmp xbooth_2
|
||||||
|
|
||||||
|
xbooth_6
|
||||||
|
add x,z1
|
||||||
|
addc x1,z0
|
||||||
|
xbooth_1
|
||||||
|
rla x
|
||||||
|
rlc x1
|
||||||
|
xbooth_2
|
||||||
|
rra y
|
||||||
|
jc xbooth_5
|
||||||
|
jne xbooth_1
|
||||||
|
jmp xbooth_4
|
||||||
|
|
||||||
|
xbooth_5
|
||||||
|
sub x,z1
|
||||||
|
subc x1,z0
|
||||||
|
xbooth_3
|
||||||
|
rla x
|
||||||
|
rlc x1
|
||||||
|
rra y
|
||||||
|
jnc xbooth_6
|
||||||
|
cmp #0FFFFh,y
|
||||||
|
jne xbooth_3
|
||||||
|
|
||||||
|
xbooth_4
|
||||||
|
mov z1,r12
|
||||||
|
mov z0,r13
|
||||||
|
|
||||||
|
pop r9
|
||||||
|
|
||||||
|
ret
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
@REM This batch file has been generated by the IAR Embedded Workbench
|
||||||
|
@REM C-SPY Debugger, as an aid to preparing a command line for running
|
||||||
|
@REM the cspybat command line utility using the appropriate settings.
|
||||||
|
@REM
|
||||||
|
@REM Note that this file is generated every time a new debug session
|
||||||
|
@REM is initialized, so you may want to move or rename the file before
|
||||||
|
@REM making changes.
|
||||||
|
@REM
|
||||||
|
@REM You can launch cspybat by typing the name of this batch file followed
|
||||||
|
@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
|
||||||
|
@REM
|
||||||
|
@REM Read about available command line parameters in the C-SPY Debugging
|
||||||
|
@REM Guide. Hints about additional command line parameters that may be
|
||||||
|
@REM useful in specific cases:
|
||||||
|
@REM --download_only Downloads a code image without starting a debug
|
||||||
|
@REM session afterwards.
|
||||||
|
@REM --silent Omits the sign-on message.
|
||||||
|
@REM --timeout Limits the maximum allowed execution time.
|
||||||
|
@REM
|
||||||
|
|
||||||
|
|
||||||
|
"C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0_2\common\bin\cspybat" "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0_2\430\bin\430proc.dll" "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0_2\430\bin\430fet.dll" %1 --plugin "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0_2\430\bin\430bat.dll" --backend -B "-p" "C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0_2\430\config\debugger\MSP430FG439.ddf" "--iv_base" "0xFFE0" "-d" "fet" "--erase_main_and_info" "--derivative" "MSP430FG43x_F43x" "--protocol" "4wire" "--eem" "EMEX_LOW" "--port" "Automatic" "--connection" "olimex" "--settlingtime=0" "--msp430_dll" "msp430.dll" "--vccDefault" "3.3" "--jtag_speed" "medium" "--memtype" "F"
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,34 @@
|
||||||
|
@REM This bat file has been generated by the IAR Embeddded Workbench
|
||||||
|
@REM C-SPY interactive debugger,as an aid to preparing a command
|
||||||
|
@REM line for running the cspybat command line utility with the
|
||||||
|
@REM appropriate settings.
|
||||||
|
@REM
|
||||||
|
@REM After making some adjustments to this file, you can launch cspybat
|
||||||
|
@REM by typing the name of this file followed by the name of the debug
|
||||||
|
@REM file (usually an ubrof file). Note that this file is generated
|
||||||
|
@REM every time a new debug session is initialized, so you may want to
|
||||||
|
@REM move or rename the file before making changes.
|
||||||
|
@REM
|
||||||
|
@REM Note: some command line arguments cannot be properly generated
|
||||||
|
@REM by this process. Specifically, the plugin which is responsible
|
||||||
|
@REM for the Terminal I/O window (and other C runtime functionality)
|
||||||
|
@REM comes in a special version for cspybat, and the name of that
|
||||||
|
@REM plugin dll is not known when generating this file. It resides in
|
||||||
|
@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
|
||||||
|
@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
|
||||||
|
@REM tool chain. Replace the '<libsupport_plugin>' parameter
|
||||||
|
@REM below with the appropriate file name. Other plugins loaded by
|
||||||
|
@REM C-SPY are usually not needed by, or will not work in, cspybat
|
||||||
|
@REM but they are listed at the end of this file for reference.
|
||||||
|
|
||||||
|
|
||||||
|
"C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\common\bin\cspybat" "C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\bin\430proc.dll" "C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\bin\430fet.dll" %1 --plugin "C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\bin\<libsupport_plugin>" --backend -B "-p" "C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\config\MSP430FG439.ddf" "--iv_base" "0xFFE0" "-d" "fet" "--erase_main_and_info" "--derivative" "MSP430FG439" "--vccvoltage=3.3" "--protocol" "4wire" "--eem" "EMEX_LOW" "--connection" "olimex" "--settlingtime=0"
|
||||||
|
|
||||||
|
|
||||||
|
@REM Loaded plugins:
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\bin\430libsupport.dll
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\430\plugins\lcd\lcd.dll
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\common\plugins\CodeCoverage\CodeCoverage.dll
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\common\plugins\Profiling\Profiling.dll
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\common\plugins\stack\stack.dll
|
||||||
|
@REM C:\Program Files\IAR Systems\IAR Embedded Workbench for MSP, v4.21 Evaluation version\common\plugins\SymList\SymList.dll
|
||||||
|
|
@ -0,0 +1,89 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<Project>
|
||||||
|
<Desktop>
|
||||||
|
<Static>
|
||||||
|
<Debug-Log>
|
||||||
|
|
||||||
|
|
||||||
|
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>1221</ColumnWidth1></Debug-Log>
|
||||||
|
<Build>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>915</ColumnWidth1><ColumnWidth2>244</ColumnWidth2><ColumnWidth3>61</ColumnWidth3></Build>
|
||||||
|
<Workspace>
|
||||||
|
<ColumnWidths>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Column0>174</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
|
||||||
|
</Workspace>
|
||||||
|
<Disassembly>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<MixedMode>1</MixedMode><CodeCovShow>0</CodeCovShow><InstrProfShow>0</InstrProfShow><col-names><item>Disassembly</item><item>_I0</item></col-names><col-widths><item>500</item><item>20</item></col-widths><DisasmHistory/><ShowCodeCoverage>1</ShowCodeCoverage><ShowInstrProfiling>1</ShowInstrProfiling></Disassembly>
|
||||||
|
</Static>
|
||||||
|
<Windows>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Wnd0>
|
||||||
|
<Tabs>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-32631-32423</Identity>
|
||||||
|
<TabName>Debug Log</TabName>
|
||||||
|
<Factory>Debug-Log</Factory>
|
||||||
|
<Session/>
|
||||||
|
</Tab>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-32108-32433</Identity>
|
||||||
|
<TabName>Build</TabName>
|
||||||
|
<Factory>Build</Factory>
|
||||||
|
<Session/>
|
||||||
|
</Tab>
|
||||||
|
</Tabs>
|
||||||
|
|
||||||
|
<SelectedTab>0</SelectedTab></Wnd0><Wnd1>
|
||||||
|
<Tabs>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-10611-32426</Identity>
|
||||||
|
<TabName>Workspace</TabName>
|
||||||
|
<Factory>Workspace</Factory>
|
||||||
|
<Session>
|
||||||
|
|
||||||
|
<NodeDict><ExpandedNode>MOD-EKG_DemoSoft</ExpandedNode></NodeDict></Session>
|
||||||
|
</Tab>
|
||||||
|
</Tabs>
|
||||||
|
|
||||||
|
<SelectedTab>0</SelectedTab></Wnd1><Wnd2>
|
||||||
|
<Tabs>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-21360-32430</Identity>
|
||||||
|
<TabName>Disassembly</TabName>
|
||||||
|
<Factory>Disassembly</Factory>
|
||||||
|
<Session/>
|
||||||
|
</Tab>
|
||||||
|
</Tabs>
|
||||||
|
|
||||||
|
<SelectedTab>0</SelectedTab></Wnd2></Windows>
|
||||||
|
<Editor>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Pane><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\MOD-EKG_DemoSoft.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd><XPos2>0</XPos2><YPos2>249</YPos2><SelStart2>11595</SelStart2><SelEnd2>11595</SelEnd2></Tab><ActiveTab>0</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
|
||||||
|
<Positions>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Top><Row0><Sizes><Toolbar-00C12E30><key>iaridepm.enu1</key></Toolbar-00C12E30></Sizes></Row0><Row1><Sizes><Toolbar-0B3FCAF8><key>debuggergui.enu1</key></Toolbar-0B3FCAF8></Sizes></Row1><Row2><Sizes><Toolbar-0B3FD5E8><key>430fet1</key></Toolbar-0B3FD5E8></Sizes></Row2></Top><Left><Row0><Sizes><Wnd1><Rect><Top>-2</Top><Left>-2</Left><Bottom>562</Bottom><Right>248</Right><x>-2</x><y>-2</y><xscreen>250</xscreen><yscreen>175</yscreen><sizeHorzCX>156250</sizeHorzCX><sizeHorzCY>211353</sizeHorzCY><sizeVertCX>156250</sizeVertCX><sizeVertCY>681159</sizeVertCY></Rect></Wnd1></Sizes></Row0></Left><Right><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>562</Bottom><Right>248</Right><x>-2</x><y>-2</y><xscreen>250</xscreen><yscreen>175</yscreen><sizeHorzCX>156250</sizeHorzCX><sizeHorzCY>211353</sizeHorzCY><sizeVertCX>156250</sizeVertCX><sizeVertCY>681159</sizeVertCY></Rect></Wnd2></Sizes></Row0></Right><Bottom><Row0><Sizes><Wnd0><Rect><Top>-2</Top><Left>-2</Left><Bottom>173</Bottom><Right>1602</Right><x>-2</x><y>-2</y><xscreen>1604</xscreen><yscreen>175</yscreen><sizeHorzCX>1002500</sizeHorzCX><sizeHorzCY>211353</sizeHorzCY><sizeVertCX>156250</sizeVertCX><sizeVertCY>211353</sizeVertCY></Rect></Wnd0></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
|
||||||
|
</Desktop>
|
||||||
|
</Project>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,94 @@
|
||||||
|
[Interrupts]
|
||||||
|
Enabled=1
|
||||||
|
[MemoryMap]
|
||||||
|
Enabled=0
|
||||||
|
Base=0
|
||||||
|
UseAuto=0
|
||||||
|
TypeViolation=1
|
||||||
|
UnspecRange=1
|
||||||
|
ActionState=1
|
||||||
|
[TraceHelper]
|
||||||
|
Enabled=0
|
||||||
|
ShowSource=1
|
||||||
|
[DebugChecksum]
|
||||||
|
Checksum=-1742591943
|
||||||
|
[State Storage]
|
||||||
|
Control Register=5814
|
||||||
|
[Sequencer]
|
||||||
|
Control Register=0
|
||||||
|
NextState0=0
|
||||||
|
NextState1=0
|
||||||
|
[Action Register]
|
||||||
|
Break=0
|
||||||
|
State Storage=0
|
||||||
|
[DisAssemblyWindow]
|
||||||
|
NumStates=_ 1
|
||||||
|
State 1=_ 1
|
||||||
|
[InstructionProfiling]
|
||||||
|
Enabled=_ 0
|
||||||
|
[CodeCoverage]
|
||||||
|
Enabled=_ 0
|
||||||
|
[Profiling]
|
||||||
|
Enabled=0
|
||||||
|
[StackPlugin]
|
||||||
|
Enabled=1
|
||||||
|
OverflowWarningsEnabled=1
|
||||||
|
WarningThreshold=90
|
||||||
|
SpWarningsEnabled=1
|
||||||
|
WarnHow=0
|
||||||
|
UseTrigger=1
|
||||||
|
TriggerName=main
|
||||||
|
LimitSize=0
|
||||||
|
ByteLimit=50
|
||||||
|
[Stack]
|
||||||
|
FillEnabled=0
|
||||||
|
OverflowWarningsEnabled=1
|
||||||
|
WarningThreshold=90
|
||||||
|
SpWarningsEnabled=1
|
||||||
|
WarnLogOnly=1
|
||||||
|
UseTrigger=1
|
||||||
|
TriggerName=main
|
||||||
|
LimitSize=0
|
||||||
|
ByteLimit=50
|
||||||
|
[EEM State Storage]
|
||||||
|
Buffer=BAAAAAAADAAAAAAAAAAAAAAA
|
||||||
|
[EEM Sequencer]
|
||||||
|
Buffer=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
|
||||||
|
[NumberOfSequencerBp]
|
||||||
|
Number=4
|
||||||
|
[Breakpoints]
|
||||||
|
Count=0
|
||||||
|
[FET]
|
||||||
|
Clock mode=46
|
||||||
|
Extended Clock mode=65535
|
||||||
|
Secure Password=
|
||||||
|
Extended Clock Control Enable=1
|
||||||
|
Advanced Extended Clock Control=0
|
||||||
|
Emulation mode=0
|
||||||
|
Free running=0
|
||||||
|
Shutting Down=3
|
||||||
|
[Memory Dump]
|
||||||
|
Start address=
|
||||||
|
Lenghth=
|
||||||
|
Address info=0
|
||||||
|
Format=0
|
||||||
|
Dump registers=0
|
||||||
|
PC=0
|
||||||
|
SP=0
|
||||||
|
SR=0
|
||||||
|
all registers=0
|
||||||
|
File name=
|
||||||
|
[Log file]
|
||||||
|
LoggingEnabled=_ 0
|
||||||
|
LogFile=_ ""
|
||||||
|
Category=_ 0
|
||||||
|
[TermIOLog]
|
||||||
|
LoggingEnabled=_ 0
|
||||||
|
LogFile=_ ""
|
||||||
|
[Aliases]
|
||||||
|
Count=0
|
||||||
|
SuppressDialog=0
|
||||||
|
[CallStack]
|
||||||
|
ShowArgs=0
|
||||||
|
[Disassembly]
|
||||||
|
MixedMode=1
|
||||||
|
|
@ -0,0 +1,77 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<Workspace>
|
||||||
|
<ConfigDictionary>
|
||||||
|
|
||||||
|
<CurrentConfigs><Project>MOD-EKG_DemoSoft/Debug</Project></CurrentConfigs></ConfigDictionary>
|
||||||
|
<Desktop>
|
||||||
|
<Static>
|
||||||
|
<Workspace>
|
||||||
|
<ColumnWidths>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Column0>318</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
|
||||||
|
</Workspace>
|
||||||
|
<Build>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>915</ColumnWidth1><ColumnWidth2>244</ColumnWidth2><ColumnWidth3>61</ColumnWidth3></Build>
|
||||||
|
<Debug-Log>
|
||||||
|
|
||||||
|
|
||||||
|
<ColumnWidth0>20</ColumnWidth0><ColumnWidth1>1221</ColumnWidth1></Debug-Log>
|
||||||
|
<TerminalIO/>
|
||||||
|
<Find-in-Files><ColumnWidth0>440</ColumnWidth0><ColumnWidth1>62</ColumnWidth1><ColumnWidth2>754</ColumnWidth2></Find-in-Files></Static>
|
||||||
|
<Windows>
|
||||||
|
|
||||||
|
|
||||||
|
<Wnd2>
|
||||||
|
<Tabs>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-5007-30075</Identity>
|
||||||
|
<TabName>Workspace</TabName>
|
||||||
|
<Factory>Workspace</Factory>
|
||||||
|
<Session>
|
||||||
|
|
||||||
|
<NodeDict><ExpandedNode>MOD-EKG_DemoSoft</ExpandedNode><ExpandedNode>MOD-EKG_DemoSoft/Output</ExpandedNode><ExpandedNode>MOD-EKG_DemoSoft/Output/MOD-EKG_DemoSoft.d43</ExpandedNode></NodeDict></Session>
|
||||||
|
</Tab>
|
||||||
|
</Tabs>
|
||||||
|
|
||||||
|
<SelectedTab>0</SelectedTab></Wnd2><Wnd3>
|
||||||
|
<Tabs>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-616-32204</Identity>
|
||||||
|
<TabName>Build</TabName>
|
||||||
|
<Factory>Build</Factory>
|
||||||
|
<Session/>
|
||||||
|
</Tab>
|
||||||
|
<Tab>
|
||||||
|
<Identity>TabID-32338-32224</Identity>
|
||||||
|
<TabName>Debug Log</TabName>
|
||||||
|
<Factory>Debug-Log</Factory>
|
||||||
|
<Session/>
|
||||||
|
</Tab>
|
||||||
|
<Tab><Identity>TabID-552-6144</Identity><TabName>Find in Files</TabName><Factory>Find-in-Files</Factory><Session/></Tab></Tabs>
|
||||||
|
|
||||||
|
<SelectedTab>0</SelectedTab></Wnd3></Windows>
|
||||||
|
<Editor>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Pane><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\MOD-EKG_DemoSoft.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd><XPos2>0</XPos2><YPos2>199</YPos2><SelStart2>11905</SelStart2><SelEnd2>11905</SelEnd2></Tab><ActiveTab>0</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
|
||||||
|
<Positions>
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
<Top><Row0><Sizes><Toolbar-00C12E30><key>iaridepm.enu1</key></Toolbar-00C12E30></Sizes></Row0><Row1><Sizes/></Row1><Row2><Sizes/></Row2><Row3><Sizes/></Row3><Row4><Sizes/></Row4><Row5><Sizes/></Row5><Row6><Sizes/></Row6></Top><Left><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>630</Bottom><Right>392</Right><x>-2</x><y>-2</y><xscreen>250</xscreen><yscreen>175</yscreen><sizeHorzCX>156250</sizeHorzCX><sizeHorzCY>211353</sizeHorzCY><sizeVertCX>246250</sizeVertCX><sizeVertCY>763285</sizeVertCY></Rect></Wnd2></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd3><Rect><Top>-2</Top><Left>-2</Left><Bottom>153</Bottom><Right>1602</Right><x>-2</x><y>-2</y><xscreen>1604</xscreen><yscreen>155</yscreen><sizeHorzCX>1002500</sizeHorzCX><sizeHorzCY>187198</sizeHorzCY><sizeVertCX>156250</sizeVertCX><sizeVertCY>211353</sizeVertCY></Rect></Wnd3></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
|
||||||
|
</Desktop>
|
||||||
|
</Workspace>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
[MainWindow]
|
||||||
|
WindowPlacement=_ 25 25 1225 657 3
|
||||||
Loading…
Reference in New Issue