diff --git a/mlock-common.yaml b/mlock-common.yaml
index 9dc1793..5783de9 100644
--- a/mlock-common.yaml
+++ b/mlock-common.yaml
@@ -1,11 +1,11 @@
-substitutions:
-  name_of_board: lasercutter
-  ip_addr: "172.23.23.26"
-  machines_token: !secret mlock_machines_token
-  wifi_ssid: !secret wifi_ssid
-  wifi_password: !secret wifi_password
-  ota_password: !secret ota_password
-  api_enckey: !secret api_enckey
+# substitutions:
+#   name_of_board: lasercutter
+#   ip_addr: "172.23.23.26"
+#   machines_token: !secret mlock_machines_token
+#   wifi_ssid: !secret wifi_ssid
+#   wifi_password: !secret wifi_password
+#   ota_password: !secret ota_password
+#   api_enckey: !secret api_enckey
 
 ###### nothing to change below this line ######
 esphome:
@@ -15,16 +15,16 @@ esphome:
   on_boot:
     - priority: 300
       then:
-        - light.addressable_set: { id: status_led, red: 0%, green: 0%, blue: 100% }
+        - light.addressable_set: { id: status_led, red: 0%, green: 0%, blue: 50% }
     - priority: -100
       then:
         - if:
             condition:
               switch.is_on: mlock_${name_of_board}_switch
             then:
-              - light.addressable_set: { id: status_led, red: 0%, green: 100%, blue: 0% }
+              - light.addressable_set: { id: status_led, red: 0%, green: 50%, blue: 0% }
             else:
-              - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+              - light.addressable_set: { id: status_led, red: 50%, green: 0%, blue: 0% }
 
 esp8266:
   board: d1_mini
@@ -107,9 +107,9 @@ script:
                 condition:
                   switch.is_on: mlock_${name_of_board}_switch
                 then:
-                  - light.addressable_set: { id: status_led, red: 0%, green: 100%, blue: 0% }
+                  - light.addressable_set: { id: status_led, red: 0%, green: 50%, blue: 0% }
                 else:
-                  - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+                  - light.addressable_set: { id: status_led, red: 50%, green: 0%, blue: 0% }
           else:
             - script.execute: check_access_machines
   - id: check_access_machines
@@ -156,7 +156,7 @@ script:
                           - repeat:
                               count: 3
                               then:
-                                - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+                                - light.addressable_set: { id: status_led, red: 70%, green: 0%, blue: 0% }
                                 - delay: 0.1s
                                 - light.addressable_set: { id: status_led, red: 0%, green: 0%, blue: 0% }
                                 - delay: 0.1s
@@ -164,7 +164,7 @@ script:
                     - repeat:
                         count: 5
                         then:
-                          - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+                          - light.addressable_set: { id: status_led, red: 70%, green: 0%, blue: 0% }
                           - delay: 0.8s
                           - light.addressable_set: { id: status_led, red: 0%, green: 0%, blue: 0% }
                           - delay: 0.8s
@@ -172,9 +172,9 @@ script:
                   condition:
                     switch.is_on: mlock_${name_of_board}_switch
                   then:
-                    - light.addressable_set: { id: status_led, red: 0%, green: 100%, blue: 0% }
+                    - light.addressable_set: { id: status_led, red: 0%, green: 50%, blue: 0% }
                   else:
-                    - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+                    - light.addressable_set: { id: status_led, red: 50%, green: 0%, blue: 0% }
   - id: toggle_switch
     mode: queued
     then:
@@ -298,7 +298,7 @@ rc522_spi:
   cs_pin: GPIO15
   on_tag:
     then:
-      - light.addressable_set: { id: status_led, red: 100%, green: 60%, blue: 0% }
+      - light.addressable_set: { id: status_led, red: 60%, green: 40%, blue: 0% }
       # small delay so the light can update its color
       - delay: 15ms
       # store the tag id into global variable
@@ -327,7 +327,7 @@ binary_sensor:
     id: ${name_of_board}gpio_input_ausschalter
     on_press:
       - switch.turn_off: mlock_${name_of_board}_switch
-      - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+      - light.addressable_set: { id: status_led, red: 50%, green: 0%, blue: 0% }
 
   # a template sensor for showing the current switch state (read only)
   - platform: template
@@ -344,7 +344,7 @@ button:
     id: ${name_of_board}_btn_ausschalter
     on_press:
       - switch.turn_off: mlock_${name_of_board}_switch
-      - light.addressable_set: { id: status_led, red: 100%, green: 0%, blue: 0% }
+      - light.addressable_set: { id: status_led, red: 50%, green: 0%, blue: 0% }
   - platform: template
     name: "${name_of_board} Tokencache leeren"
     id: ${name_of_board}_btn_tokencache_leeren