ctdo
/
dfi-led-matrix
16
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
dfi-led-matrix/eigener_ctrl/stm32f407-olimex/chibios/os/hal/src/hal_usb.c

996 lines
31 KiB
C
Executable File
Raw Blame History

/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file hal_usb.c
* @brief USB Driver code.
*
* @addtogroup USB
* @{
*/
#include <string.h>
#include "hal.h"
#if (HAL_USE_USB == TRUE) || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
static const uint8_t zero_status[] = {0x00, 0x00};
static const uint8_t active_status[] ={0x00, 0x00};
static const uint8_t halted_status[] = {0x01, 0x00};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static uint16_t get_hword(uint8_t *p) {
uint16_t hw;
hw = (uint16_t)*p++;
hw |= (uint16_t)*p << 8U;
return hw;
}
/**
* @brief SET ADDRESS transaction callback.
*
* @param[in] usbp pointer to the @p USBDriver object
*/
static void set_address(USBDriver *usbp) {
usbp->address = usbp->setup[2];
usb_lld_set_address(usbp);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_ADDRESS);
usbp->state = USB_SELECTED;
}
/**
* @brief Standard requests handler.
* @details This is the standard requests default handler, most standard
* requests are handled here, the user can override the standard
* handling using the @p requests_hook_cb hook in the
* @p USBConfig structure.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The request handling exit code.
* @retval false Request not recognized by the handler or error.
* @retval true Request handled.
*/
static bool default_handler(USBDriver *usbp) {
const USBDescriptor *dp;
/* Decoding the request.*/
switch ((((uint32_t)usbp->setup[0] & (USB_RTYPE_RECIPIENT_MASK |
USB_RTYPE_TYPE_MASK)) |
((uint32_t)usbp->setup[1] << 8U))) {
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_STATUS << 8):
/* Just returns the current status word.*/
usbSetupTransfer(usbp, (uint8_t *)&usbp->status, 2, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status &= ~2U;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_FEATURE << 8):
/* Only the DEVICE_REMOTE_WAKEUP is handled here, any other feature
number is handled as an error.*/
if (usbp->setup[2] == USB_FEATURE_DEVICE_REMOTE_WAKEUP) {
usbp->status |= 2U;
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
}
return false;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_ADDRESS << 8):
/* The SET_ADDRESS handling can be performed here or postponed after
the status packed depending on the USB_SET_ADDRESS_MODE low
driver setting.*/
#if USB_SET_ADDRESS_MODE == USB_EARLY_SET_ADDRESS
if ((usbp->setup[0] == USB_RTYPE_RECIPIENT_DEVICE) &&
(usbp->setup[1] == USB_REQ_SET_ADDRESS)) {
set_address(usbp);
}
usbSetupTransfer(usbp, NULL, 0, NULL);
#else
usbSetupTransfer(usbp, NULL, 0, set_address);
#endif
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_DESCRIPTOR << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_GET_DESCRIPTOR << 8):
/* Handling descriptor requests from the host.*/
dp = usbp->config->get_descriptor_cb(usbp, usbp->setup[3],
usbp->setup[2],
get_hword(&usbp->setup[4]));
if (dp == NULL) {
return false;
}
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)dp->ud_string, dp->ud_size, NULL);
/*lint -restore*/
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_GET_CONFIGURATION << 8):
/* Returning the last selected configuration.*/
usbSetupTransfer(usbp, &usbp->configuration, 1, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_CONFIGURATION << 8):
/* Handling configuration selection from the host only if it is different
from the current configuration.*/
if (usbp->configuration != usbp->setup[2]) {
/* If the USB device is already active then we have to perform the clear
procedure on the current configuration.*/
if (usbp->state == USB_ACTIVE) {
/* Current configuration cleared.*/
osalSysLockFromISR ();
usbDisableEndpointsI(usbp);
osalSysUnlockFromISR ();
usbp->configuration = 0U;
usbp->state = USB_SELECTED;
_usb_isr_invoke_event_cb(usbp, USB_EVENT_UNCONFIGURED);
}
if (usbp->setup[2] != 0U) {
/* New configuration.*/
usbp->configuration = usbp->setup[2];
usbp->state = USB_ACTIVE;
_usb_isr_invoke_event_cb(usbp, USB_EVENT_CONFIGURED);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_GET_STATUS << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_SYNCH_FRAME << 8):
/* Just sending two zero bytes, the application can change the behavior
using a hook..*/
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)zero_status, 2, NULL);
/*lint -restore*/
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_GET_STATUS << 8):
/* Sending the EP status.*/
if ((usbp->setup[4] & 0x80U) != 0U) {
switch (usb_lld_get_status_in(usbp, usbp->setup[4] & 0x0FU)) {
case EP_STATUS_STALLED:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_ACTIVE:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_DISABLED:
default:
return false;
}
}
else {
switch (usb_lld_get_status_out(usbp, usbp->setup[4] & 0x0FU)) {
case EP_STATUS_STALLED:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)halted_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_ACTIVE:
/*lint -save -e9005 [11.8] Removing const is fine.*/
usbSetupTransfer(usbp, (uint8_t *)active_status, 2, NULL);
/*lint -restore*/
return true;
case EP_STATUS_DISABLED:
default:
return false;
}
}
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT) {
return false;
}
/* Clearing the EP status, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0FU) != 0U) {
if ((usbp->setup[4] & 0x80U) != 0U) {
usb_lld_clear_in(usbp, usbp->setup[4] & 0x0FU);
}
else {
usb_lld_clear_out(usbp, usbp->setup[4] & 0x0FU);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_ENDPOINT | ((uint32_t)USB_REQ_SET_FEATURE << 8):
/* Only ENDPOINT_HALT is handled as feature.*/
if (usbp->setup[2] != USB_FEATURE_ENDPOINT_HALT) {
return false;
}
/* Stalling the EP, not valid for EP0, it is ignored in that case.*/
if ((usbp->setup[4] & 0x0FU) != 0U) {
if ((usbp->setup[4] & 0x80U) != 0U) {
usb_lld_stall_in(usbp, usbp->setup[4] & 0x0FU);
}
else {
usb_lld_stall_out(usbp, usbp->setup[4] & 0x0FU);
}
}
usbSetupTransfer(usbp, NULL, 0, NULL);
return true;
case (uint32_t)USB_RTYPE_RECIPIENT_DEVICE | ((uint32_t)USB_REQ_SET_DESCRIPTOR << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_CLEAR_FEATURE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_SET_FEATURE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_GET_INTERFACE << 8):
case (uint32_t)USB_RTYPE_RECIPIENT_INTERFACE | ((uint32_t)USB_REQ_SET_INTERFACE << 8):
/* All the above requests are not handled here, if you need them then
use the hook mechanism and provide handling.*/
default:
return false;
}
}
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief USB Driver initialization.
* @note This function is implicitly invoked by @p halInit(), there is
* no need to explicitly initialize the driver.
*
* @init
*/
void usbInit(void) {
usb_lld_init();
}
/**
* @brief Initializes the standard part of a @p USBDriver structure.
*
* @param[out] usbp pointer to the @p USBDriver object
*
* @init
*/
void usbObjectInit(USBDriver *usbp) {
unsigned i;
usbp->state = USB_STOP;
usbp->config = NULL;
for (i = 0; i < (unsigned)USB_MAX_ENDPOINTS; i++) {
usbp->in_params[i] = NULL;
usbp->out_params[i] = NULL;
}
usbp->transmitting = 0;
usbp->receiving = 0;
}
/**
* @brief Configures and activates the USB peripheral.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] config pointer to the @p USBConfig object
*
* @api
*/
void usbStart(USBDriver *usbp, const USBConfig *config) {
unsigned i;
osalDbgCheck((usbp != NULL) && (config != NULL));
osalSysLock();
osalDbgAssert((usbp->state == USB_STOP) || (usbp->state == USB_READY),
"invalid state");
usbp->config = config;
for (i = 0; i <= (unsigned)USB_MAX_ENDPOINTS; i++) {
usbp->epc[i] = NULL;
}
usb_lld_start(usbp);
usbp->state = USB_READY;
osalSysUnlock();
}
/**
* @brief Deactivates the USB peripheral.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @api
*/
void usbStop(USBDriver *usbp) {
unsigned i;
osalDbgCheck(usbp != NULL);
osalSysLock();
osalDbgAssert((usbp->state == USB_STOP) || (usbp->state == USB_READY) ||
(usbp->state == USB_SELECTED) || (usbp->state == USB_ACTIVE) ||
(usbp->state == USB_SUSPENDED),
"invalid state");
usb_lld_stop(usbp);
usbp->config = NULL;
usbp->state = USB_STOP;
/* Resetting all ongoing synchronous operations.*/
for (i = 0; i <= (unsigned)USB_MAX_ENDPOINTS; i++) {
#if USB_USE_WAIT == TRUE
if (usbp->epc[i] != NULL) {
if (usbp->epc[i]->in_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->in_state->thread, MSG_RESET);
}
if (usbp->epc[i]->out_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->out_state->thread, MSG_RESET);
}
}
#endif
usbp->epc[i] = NULL;
}
osalOsRescheduleS();
osalSysUnlock();
}
/**
* @brief Enables an endpoint.
* @details This function enables an endpoint, both IN and/or OUT directions
* depending on the configuration structure.
* @note This function must be invoked in response of a SET_CONFIGURATION
* or SET_INTERFACE message.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[in] epcp the endpoint configuration
*
* @iclass
*/
void usbInitEndpointI(USBDriver *usbp, usbep_t ep,
const USBEndpointConfig *epcp) {
osalDbgCheckClassI();
osalDbgCheck((usbp != NULL) && (epcp != NULL));
osalDbgAssert(usbp->state == USB_ACTIVE,
"invalid state");
osalDbgAssert(usbp->epc[ep] == NULL, "already initialized");
/* Logically enabling the endpoint in the USBDriver structure.*/
usbp->epc[ep] = epcp;
/* Clearing the state structures, custom fields as well.*/
if (epcp->in_state != NULL) {
memset(epcp->in_state, 0, sizeof(USBInEndpointState));
}
if (epcp->out_state != NULL) {
memset(epcp->out_state, 0, sizeof(USBOutEndpointState));
}
/* Low level endpoint activation.*/
usb_lld_init_endpoint(usbp, ep);
}
/**
* @brief Disables all the active endpoints.
* @details This function disables all the active endpoints except the
* endpoint zero.
* @note This function must be invoked in response of a SET_CONFIGURATION
* message with configuration number zero.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @iclass
*/
void usbDisableEndpointsI(USBDriver *usbp) {
unsigned i;
osalDbgCheckClassI();
osalDbgCheck(usbp != NULL);
osalDbgAssert(usbp->state == USB_ACTIVE, "invalid state");
usbp->transmitting &= 1U;
usbp->receiving &= 1U;
for (i = 1; i <= (unsigned)USB_MAX_ENDPOINTS; i++) {
#if USB_USE_WAIT == TRUE
/* Signaling the event to threads waiting on endpoints.*/
if (usbp->epc[i] != NULL) {
if (usbp->epc[i]->in_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->in_state->thread, MSG_RESET);
}
if (usbp->epc[i]->out_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->out_state->thread, MSG_RESET);
}
}
#endif
usbp->epc[i] = NULL;
}
/* Low level endpoints deactivation.*/
usb_lld_disable_endpoints(usbp);
}
/**
* @brief Starts a receive transaction on an OUT endpoint.
* @note This function is meant to be called from ISR context outside
* critical zones because there is a potentially slow operation
* inside.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the received data
* @param[in] n transaction size. It is recommended a multiple of
* the packet size because the excess is discarded.
*
* @iclass
*/
void usbStartReceiveI(USBDriver *usbp, usbep_t ep,
uint8_t *buf, size_t n) {
USBOutEndpointState *osp;
osalDbgCheckClassI();
osalDbgCheck((usbp != NULL) && (ep <= (usbep_t)USB_MAX_ENDPOINTS));
osalDbgAssert(!usbGetReceiveStatusI(usbp, ep), "already receiving");
/* Marking the endpoint as active.*/
usbp->receiving |= (uint16_t)((unsigned)1U << (unsigned)ep);
/* Setting up the transfer.*/
/*lint -save -e661 [18.1] pclint is confused by the check on ep.*/
osp = usbp->epc[ep]->out_state;
/*lint -restore*/
osp->rxbuf = buf;
osp->rxsize = n;
osp->rxcnt = 0;
#if USB_USE_WAIT == TRUE
osp->thread = NULL;
#endif
/* Starting transfer.*/
usb_lld_start_out(usbp, ep);
}
/**
* @brief Starts a transmit transaction on an IN endpoint.
* @note This function is meant to be called from ISR context outside
* critical zones because there is a potentially slow operation
* inside.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[in] buf buffer where to fetch the data to be transmitted
* @param[in] n transaction size
*
* @iclass
*/
void usbStartTransmitI(USBDriver *usbp, usbep_t ep,
const uint8_t *buf, size_t n) {
USBInEndpointState *isp;
osalDbgCheckClassI();
osalDbgCheck((usbp != NULL) && (ep <= (usbep_t)USB_MAX_ENDPOINTS));
osalDbgAssert(!usbGetTransmitStatusI(usbp, ep), "already transmitting");
/* Marking the endpoint as active.*/
usbp->transmitting |= (uint16_t)((unsigned)1U << (unsigned)ep);
/* Setting up the transfer.*/
/*lint -save -e661 [18.1] pclint is confused by the check on ep.*/
isp = usbp->epc[ep]->in_state;
/*lint -restore*/
isp->txbuf = buf;
isp->txsize = n;
isp->txcnt = 0;
#if USB_USE_WAIT == TRUE
isp->thread = NULL;
#endif
/* Starting transfer.*/
usb_lld_start_in(usbp, ep);
}
#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
/**
* @brief Performs a receive transaction on an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the received data
* @param[in] n transaction size. It is recommended a multiple of
* the packet size because the excess is discarded.
*
* @return The received effective data size, it can be less than
* the amount specified.
* @retval MSG_RESET driver not in @p USB_ACTIVE state or the operation
* has been aborted by an USB reset or a transition to
* the @p USB_SUSPENDED state.
*
* @api
*/
msg_t usbReceive(USBDriver *usbp, usbep_t ep, uint8_t *buf, size_t n) {
msg_t msg;
osalSysLock();
if (usbGetDriverStateI(usbp) != USB_ACTIVE) {
osalSysUnlock();
return MSG_RESET;
}
usbStartReceiveI(usbp, ep, buf, n);
msg = osalThreadSuspendS(&usbp->epc[ep]->out_state->thread);
osalSysUnlock();
return msg;
}
/**
* @brief Performs a transmit transaction on an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[in] buf buffer where to fetch the data to be transmitted
* @param[in] n transaction size
*
* @return The operation status.
* @retval MSG_OK operation performed successfully.
* @retval MSG_RESET driver not in @p USB_ACTIVE state or the operation
* has been aborted by an USB reset or a transition to
* the @p USB_SUSPENDED state.
*
* @api
*/
msg_t usbTransmit(USBDriver *usbp, usbep_t ep, const uint8_t *buf, size_t n) {
msg_t msg;
osalSysLock();
if (usbGetDriverStateI(usbp) != USB_ACTIVE) {
osalSysUnlock();
return MSG_RESET;
}
usbStartTransmitI(usbp, ep, buf, n);
msg = osalThreadSuspendS(&usbp->epc[ep]->in_state->thread);
osalSysUnlock();
return msg;
}
#endif /* USB_USE_WAIT == TRUE */
/**
* @brief Stalls an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @return The operation status.
* @retval false Endpoint stalled.
* @retval true Endpoint busy, not stalled.
*
* @iclass
*/
bool usbStallReceiveI(USBDriver *usbp, usbep_t ep) {
osalDbgCheckClassI();
osalDbgCheck(usbp != NULL);
if (usbGetReceiveStatusI(usbp, ep)) {
return true;
}
usb_lld_stall_out(usbp, ep);
return false;
}
/**
* @brief Stalls an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @return The operation status.
* @retval false Endpoint stalled.
* @retval true Endpoint busy, not stalled.
*
* @iclass
*/
bool usbStallTransmitI(USBDriver *usbp, usbep_t ep) {
osalDbgCheckClassI();
osalDbgCheck(usbp != NULL);
if (usbGetTransmitStatusI(usbp, ep)) {
return true;
}
usb_lld_stall_in(usbp, ep);
return false;
}
/**
* @brief Host wake-up procedure.
* @note It is silently ignored if the USB device is not in the
* @p USB_SUSPENDED state.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @api
*/
void usbWakeupHost(USBDriver *usbp) {
if (usbp->state == USB_SUSPENDED) {
/* Starting host wakeup procedure.*/
usb_lld_wakeup_host(usbp);
}
}
/**
* @brief USB reset routine.
* @details This function must be invoked when an USB bus reset condition is
* detected.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void _usb_reset(USBDriver *usbp) {
unsigned i;
/* State transition.*/
usbp->state = USB_READY;
/* Resetting internal state.*/
usbp->status = 0;
usbp->address = 0;
usbp->configuration = 0;
usbp->transmitting = 0;
usbp->receiving = 0;
/* Invalidates all endpoints into the USBDriver structure.*/
for (i = 0; i <= (unsigned)USB_MAX_ENDPOINTS; i++) {
#if USB_USE_WAIT == TRUE
/* Signaling the event to threads waiting on endpoints.*/
if (usbp->epc[i] != NULL) {
osalSysLockFromISR();
if (usbp->epc[i]->in_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->in_state->thread, MSG_RESET);
}
if (usbp->epc[i]->out_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->out_state->thread, MSG_RESET);
}
osalSysUnlockFromISR();
}
#endif
usbp->epc[i] = NULL;
}
/* EP0 state machine initialization.*/
usbp->ep0state = USB_EP0_STP_WAITING;
/* Low level reset.*/
usb_lld_reset(usbp);
/* Notification of reset event.*/
_usb_isr_invoke_event_cb(usbp, USB_EVENT_RESET);
}
/**
* @brief USB suspend routine.
* @details This function must be invoked when an USB bus suspend condition is
* detected.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void _usb_suspend(USBDriver *usbp) {
/* No state change, suspend always returns to previous state. */
/* State transition.*/
usbp->saved_state = usbp->state;
usbp->state = USB_SUSPENDED;
/* Notification of suspend event.*/
_usb_isr_invoke_event_cb(usbp, USB_EVENT_SUSPEND);
/* Signaling the event to threads waiting on endpoints.*/
#if USB_USE_WAIT == TRUE
{
unsigned i;
for (i = 0; i <= (unsigned)USB_MAX_ENDPOINTS; i++) {
if (usbp->epc[i] != NULL) {
osalSysLockFromISR();
if (usbp->epc[i]->in_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->in_state->thread, MSG_RESET);
}
if (usbp->epc[i]->out_state != NULL) {
osalThreadResumeI(&usbp->epc[i]->out_state->thread, MSG_RESET);
}
osalSysUnlockFromISR();
}
}
}
#endif
}
/**
* @brief USB wake-up routine.
* @details This function must be invoked when an USB bus wake-up condition is
* detected.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
void _usb_wakeup(USBDriver *usbp) {
/* State transition, returning to the previous state.*/
usbp->state = usbp->saved_state;
/* Notification of suspend event.*/
_usb_isr_invoke_event_cb(usbp, USB_EVENT_WAKEUP);
}
/**
* @brief Default EP0 SETUP callback.
* @details This function is used by the low level driver as default handler
* for EP0 SETUP events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0setup(USBDriver *usbp, usbep_t ep) {
size_t max;
/* Is the EP0 state machine in the correct state for handling setup
packets?*/
if (usbp->ep0state != USB_EP0_STP_WAITING) {
/* This is unexpected could require handling with a warning event.*/
/* TODO: handling here.*/
/* Resetting the EP0 state machine and going ahead.*/
usbp->ep0state = USB_EP0_STP_WAITING;
}
/* Reading the setup data into the driver buffer.*/
usbReadSetup(usbp, ep, usbp->setup);
/* First verify if the application has an handler installed for this
request.*/
/*lint -save -e9007 [13.5] No side effects, it is intentional.*/
if ((usbp->config->requests_hook_cb == NULL) ||
!(usbp->config->requests_hook_cb(usbp))) {
/*lint -restore*/
/* Invoking the default handler, if this fails then stalls the
endpoint zero as error.*/
/*lint -save -e9007 [13.5] No side effects, it is intentional.*/
if (((usbp->setup[0] & USB_RTYPE_TYPE_MASK) != USB_RTYPE_TYPE_STD) ||
!default_handler(usbp)) {
/*lint -restore*/
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
}
}
#if (USB_SET_ADDRESS_ACK_HANDLING == USB_SET_ADDRESS_ACK_HW)
if (usbp->setup[1] == USB_REQ_SET_ADDRESS) {
/* Zero-length packet sent by hardware */
return;
}
#endif
/* Transfer preparation. The request handler must have populated
correctly the fields ep0next, ep0n and ep0endcb using the macro
usbSetupTransfer().*/
max = (size_t)get_hword(&usbp->setup[6]);
/* The transfer size cannot exceed the specified amount.*/
if (usbp->ep0n > max) {
usbp->ep0n = max;
}
if ((usbp->setup[0] & USB_RTYPE_DIR_MASK) == USB_RTYPE_DIR_DEV2HOST) {
/* IN phase.*/
if (usbp->ep0n != 0U) {
/* Starts the transmit phase.*/
usbp->ep0state = USB_EP0_IN_TX;
osalSysLockFromISR();
usbStartTransmitI(usbp, 0, usbp->ep0next, usbp->ep0n);
osalSysUnlockFromISR();
}
else {
/* No transmission phase, directly receiving the zero sized status
packet.*/
usbp->ep0state = USB_EP0_OUT_WAITING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
osalSysLockFromISR();
usbStartReceiveI(usbp, 0, NULL, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
}
}
else {
/* OUT phase.*/
if (usbp->ep0n != 0U) {
/* Starts the receive phase.*/
usbp->ep0state = USB_EP0_OUT_RX;
osalSysLockFromISR();
usbStartReceiveI(usbp, 0, usbp->ep0next, usbp->ep0n);
osalSysUnlockFromISR();
}
else {
/* No receive phase, directly sending the zero sized status
packet.*/
usbp->ep0state = USB_EP0_IN_SENDING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
osalSysLockFromISR();
usbStartTransmitI(usbp, 0, NULL, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
}
}
}
/**
* @brief Default EP0 IN callback.
* @details This function is used by the low level driver as default handler
* for EP0 IN events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0in(USBDriver *usbp, usbep_t ep) {
size_t max;
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_IN_TX:
max = (size_t)get_hword(&usbp->setup[6]);
/* If the transmitted size is less than the requested size and it is a
multiple of the maximum packet size then a zero size packet must be
transmitted.*/
if ((usbp->ep0n < max) &&
((usbp->ep0n % usbp->epc[0]->in_maxsize) == 0U)) {
osalSysLockFromISR();
usbStartTransmitI(usbp, 0, NULL, 0);
osalSysUnlockFromISR();
usbp->ep0state = USB_EP0_IN_WAITING_TX0;
return;
}
/* Falls into, it is intentional.*/
case USB_EP0_IN_WAITING_TX0:
/* Transmit phase over, receiving the zero sized status packet.*/
usbp->ep0state = USB_EP0_OUT_WAITING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
osalSysLockFromISR();
usbStartReceiveI(usbp, 0, NULL, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
return;
case USB_EP0_IN_SENDING_STS:
/* Status packet sent, invoking the callback if defined.*/
if (usbp->ep0endcb != NULL) {
usbp->ep0endcb(usbp);
}
usbp->ep0state = USB_EP0_STP_WAITING;
return;
case USB_EP0_STP_WAITING:
case USB_EP0_OUT_WAITING_STS:
case USB_EP0_OUT_RX:
/* All the above are invalid states in the IN phase.*/
osalDbgAssert(false, "EP0 state machine error");
/* Falling through is intentional.*/
case USB_EP0_ERROR:
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
default:
osalDbgAssert(false, "EP0 state machine invalid state");
}
}
/**
* @brief Default EP0 OUT callback.
* @details This function is used by the low level driver as default handler
* for EP0 OUT events.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number, always zero
*
* @notapi
*/
void _usb_ep0out(USBDriver *usbp, usbep_t ep) {
(void)ep;
switch (usbp->ep0state) {
case USB_EP0_OUT_RX:
/* Receive phase over, sending the zero sized status packet.*/
usbp->ep0state = USB_EP0_IN_SENDING_STS;
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
osalSysLockFromISR();
usbStartTransmitI(usbp, 0, NULL, 0);
osalSysUnlockFromISR();
#else
usb_lld_end_setup(usbp, ep);
#endif
return;
case USB_EP0_OUT_WAITING_STS:
/* Status packet received, it must be zero sized, invoking the callback
if defined.*/
#if (USB_EP0_STATUS_STAGE == USB_EP0_STATUS_STAGE_SW)
if (usbGetReceiveTransactionSizeX(usbp, 0) != 0U) {
break;
}
#endif
if (usbp->ep0endcb != NULL) {
usbp->ep0endcb(usbp);
}
usbp->ep0state = USB_EP0_STP_WAITING;
return;
case USB_EP0_STP_WAITING:
case USB_EP0_IN_TX:
case USB_EP0_IN_WAITING_TX0:
case USB_EP0_IN_SENDING_STS:
/* All the above are invalid states in the IN phase.*/
osalDbgAssert(false, "EP0 state machine error");
/* Falling through is intentional.*/
case USB_EP0_ERROR:
/* Error response, the state machine goes into an error state, the low
level layer will have to reset it to USB_EP0_WAITING_SETUP after
receiving a SETUP packet.*/
usb_lld_stall_in(usbp, 0);
usb_lld_stall_out(usbp, 0);
_usb_isr_invoke_event_cb(usbp, USB_EVENT_STALLED);
usbp->ep0state = USB_EP0_ERROR;
return;
default:
osalDbgAssert(false, "EP0 state machine invalid state");
}
}
#endif /* HAL_USE_USB == TRUE */
/** @} */
Reference in New Issue View Git Blame Copy Permalink