Merge branch 'master' into publiceng

config.in

@@ -6,23 +6,19 @@ comment "General Setup"
 	#bool 'Prompt for experimental code' CONFIG_EXPERIMENTAL
 
 	choice 'Target MCU'           \
-	  "ATmega8        atmega8     \
-	   ATmega16       atmega16    \
-	   ATmega164      atmega164   \
-	   ATmega164P     atmega164p  \
-	   ATmega168      atmega168   \
-	   ATmega168P     atmega168p  \
+ 	  "ATmega8        atmega8     \
+ 	   ATmega16       atmega16    \
+ 	   ATmega168      atmega168   \
+ 	   ATmega168P     atmega168p  \
 	   ATmega32       atmega32    \
-	   ATmega324      atmega324   \
-	   ATmega324P     atmega324p  \
 	   ATmega32U4     atmega32u4  \
 	   ATmega328      atmega328   \
-	   ATmega328P     atmega328p  \
+	   ATmega328p     atmega328p  \
 	   ATmega644      atmega644   \
-	   ATmega644P     atmega644p  \
+	   ATmega644p     atmega644p  \
 	   ATmega1280     atmega1280  \
 	   ATmega1284     atmega1284  \
-	   ATmega1284P    atmega1284p \
+	   ATmega1284p    atmega1284p \
 	   ATmega2560     atmega2560  \
 	   ATmega8515     atmega8515" \
 	   'ATmega32' MCU
@@ -66,13 +62,9 @@ source src/can/config.in
 ###############################################################################
 
 
-### UART Menu #################################################################
-source src/uart/config.in
-###############################################################################
-
-
 ### Borg Menu #################################################################
 dep_bool "Menu Support" MENU_SUPPORT $JOYSTICK_SUPPORT
+depends on JOYSTICK_SUPPORT
 ###############################################################################
 
 

defaults.mk

@@ -36,85 +36,69 @@ OSTYPE = $(shell uname)
 MACHINE = $(shell uname -m)
 
 ifeq ($(findstring CYGWIN,$(OSTYPE)),CYGWIN)
-	CFLAGS_SIM  = -g -Wall -pedantic -std=c99 -O0 -D_WIN32 -D_XOPEN_SOURCE=600
-	ifeq ($(MACHINE),x86_64)
-		LDFLAGS_SIM = -T ld_scripts/i386pep.x
-	else
-		ifeq ($(MACHINE),i686)
-			LDFLAGS_SIM = -T ld_scripts/i386pe.x
-		else
-			$(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
-		endif
-	endif
-	LIBS_SIM = -lgdi32 -lwinmm -lm
+  CFLAGS_SIM  = -g -Wall -pedantic -std=c99 -O0 -D_WIN32 -D_XOPEN_SOURCE=600
+  ifeq ($(MACHINE),x86_64)
+    LDFLAGS_SIM = -T ld_scripts/i386pep.x
+  else
+    ifeq ($(MACHINE),i686)
+      LDFLAGS_SIM = -T ld_scripts/i386pe.x
+    else
+        $(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
+    endif
+  endif
+  LIBS_SIM    = -lgdi32 -lwinmm -lm
 else
-	ifeq ($(OSTYPE),FreeBSD)
-		CFLAGS_SIM = -g -I/usr/local/include -Wall -pedantic -std=c99 -O0
-		CFLAGS_SIM += -D_XOPEN_SOURCE=600
-		ifeq ($(MACHINE),amd64)
-			LDFLAGS_SIM = -L/usr/local/lib -T ld_scripts/elf_x86_64_fbsd.x
-		else
-			ifeq ($(MACHINE),i386)
-				LDFLAGS_SIM = -L/usr/local/lib -T ld_scripts/elf_i386_fbsd.x
-			else
-				$(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
-			endif
-		endif
-		LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
-	else
-		ifeq ($(OSTYPE),NetBSD)
-			CFLAGS_SIM = -g -I /usr/pkg/include -I/usr/X11R7/include -Wall -pedantic -std=c99 -O0
-			CFLAGS_SIM += -D_XOPEN_SOURCE=600
-			ifeq ($(MACHINE),amd64)
-				LDFLAGS_SIM = -L/usr/pkg/lib -L/usr/X11R7/lib -T ld_scripts/elf_x86_64_nbsd.x -Wl,-R/usr/pkg/lib,-R/usr/X11R7/lib
-			else
-				ifeq ($(MACHINE),i386)
-					LDFLAGS_SIM = -L/usr/pkg/lib -L/usr/X11R7/lib -T ld_scripts/elf_i386_nbsd.x -Wl,-R/usr/pkg/lib,-R/usr/X11R7/lib
-				else
-					$(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
-				endif
-			endif
-			LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
-		else
-			ifeq ($(OSTYPE),OpenBSD)
-				CFLAGS_SIM = -g -I/usr/local/include -I/usr/X11R6/include -Wall -pedantic -std=c99 -O0
-				CFLAGS_SIM += -D_XOPEN_SOURCE=600
-				ifeq ($(MACHINE),amd64)
-					LDFLAGS_SIM = -L/usr/local/lib -L/usr/X11R6/lib -T ld_scripts/elf_x86_64_obsd.xd
-				else
-					ifeq ($(MACHINE),i386)
-						LDFLAGS_SIM = -L/usr/local/lib -L/usr/X11R6/lib -T ld_scripts/elf_i386_obsd.xd
-					else
-						$(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
-					endif
-				endif
-				LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
-			else
-				ifeq ($(OSTYPE),Linux)
-					CFLAGS_SIM  = -g -Wall -pedantic -std=c99 -O0 -D_XOPEN_SOURCE=600
-					ifeq ($(MACHINE),x86_64)
-						LDFLAGS_SIM = -T ld_scripts/elf_x86_64.x
-					else
-						ifeq ($(MACHINE),i686)
-							LDFLAGS_SIM = -T ld_scripts/elf_i386.x
-						else
-							$(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
-						endif
-					endif
-					LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
-				else
-					($(warning $(n)$(n)Simulator build is not supported on your system.$(n)$(n)\
+  ifeq ($(OSTYPE),FreeBSD)
+    CFLAGS_SIM = -g -I/usr/local/include -Wall -pedantic -std=c99 -O0
+    CFLAGS_SIM += -D_XOPEN_SOURCE=600
+    ifeq ($(MACHINE),amd64)
+      LDFLAGS_SIM = -L/usr/local/lib -T ld_scripts/elf_x86_64_fbsd.x
+    else
+      ifeq ($(MACHINE),i386)
+        LDFLAGS_SIM = -L/usr/local/lib -T ld_scripts/elf_i386_fbsd.x
+      else
+        $(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
+      endif
+    endif
+    LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
+  else
+    ifeq ($(OSTYPE),NetBSD)
+      CFLAGS_SIM = -g -I /usr/pkg/include -I/usr/X11R7/include -Wall -pedantic -std=c99 -O0
+      CFLAGS_SIM += -D_XOPEN_SOURCE=600
+      ifeq ($(MACHINE),amd64)
+        LDFLAGS_SIM = -L/usr/pkg/lib -L/usr/X11R7/lib -T ld_scripts/elf_x86_64_nbsd.x -Wl,-R/usr/pkg/lib,-R/usr/X11R7/lib
+      else
+        ifeq ($(MACHINE),i386)
+           LDFLAGS_SIM = -L/usr/pkg/lib -L/usr/X11R7/lib -T ld_scripts/elf_i386_nbsd.x -Wl,-R/usr/pkg/lib,-R/usr/X11R7/lib
+         else
+            $(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
+         endif
+      endif
+      LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
+    else
+      ifeq ($(OSTYPE),Linux)
+        CFLAGS_SIM  = -g -Wall -pedantic -std=c99 -O0 -D_XOPEN_SOURCE=600
+        ifeq ($(MACHINE),x86_64)
+          LDFLAGS_SIM = -T ld_scripts/elf_x86_64.x
+        else
+          ifeq ($(MACHINE),i686)
+            LDFLAGS_SIM = -T ld_scripts/elf_i386.x
+          else
+             $(warning $(n)$(n)Simulator build is only supported on i386 and amd64.$(n)$(n))
+          endif
+        endif
+        LIBS_SIM = -lglut -lpthread -lGL -lGLU -lm
+      else
+        ($(warning $(n)$(n)Simulator build is not supported on your system.$(n)$(n)\
 Currently supported platforms:$(n) \
-Linux on i386 and amd64$(n) \
-FreeBSD on i386 and amd64$(n) \
-NetBSD on i386 and amd64$(n) \
-Windows (via Cygwin) on i386 and amd64)
-				endif
-			endif
-		endif
-	endif
+  Linux on i386 and amd64$(n) \
+  FreeBSD on i386 and amd64$(n) \
+  NetBSD on i386 and amd64$(n) \
+  Windows (via Cygwin) on i386 and amd64)
+      endif
+    endif
+  endif
 endif
-
 ##############################################################################
 # the default target
 $(TARGET):
@@ -122,7 +106,7 @@ $(TARGET):
 ##############################################################################
 # include user's config.mk file
 
-$(MAKETOPDIR)/config.mk:
+$(MAKETOPDIR)/config.mk: 
 	@echo "# Customize your config here!" >$@
 	@echo "# Add further CFLAGS by using the += operator, eg." >>$@
 	@echo "# CFLAGS += -mstrict-X" >>$@
@@ -132,35 +116,38 @@ $(MAKETOPDIR)/config.mk:
 	@echo "#" >>$@
 	@echo "# Other flags you might want to tune: CPPFLAGS, LDFLAGS ..." >>$@
 	@echo "Created default config.mk, tune your settings there!"
-
 -include $(MAKETOPDIR)/config.mk
 
+
 ##############################################################################
 # configure load address for bootloader, if enabled
 #
 ifneq ($(MAKECMDGOALS),clean)
-	ifneq ($(MAKECMDGOALS),mrproper)
-		ifneq ($(MAKECMDGOALS),menuconfig)  
-			include $(MAKETOPDIR)/.config
-			CPPFLAGS += -DF_CPU=$(FREQ)UL -mmcu=$(MCU)
+ifneq ($(MAKECMDGOALS),mrproper)
+ifneq ($(MAKECMDGOALS),menuconfig)  
 
-			# flags for the linker, choose appropriate linker script
-			ifeq ($(findstring atmega256,$(MCU)),atmega256)
-				LDFLAGS += -T ld_scripts/avr6.x -Wl,-Map,image.map -mmcu=$(MCU)
-			else
-				ifeq ($(findstring atmega128,$(MCU)),atmega128)
-					LDFLAGS += -T ld_scripts/avr51.x -Wl,-Map,image.map -mmcu=$(MCU)
-				else
-					LDFLAGS += -T ld_scripts/avr5.x -Wl,-Map,image.map -mmcu=$(MCU)
-				endif
-			endif
-		endif # MAKECMDGOALS!=menuconfig
-	endif # MAKECMDGOALS!=mrproper
+include $(MAKETOPDIR)/.config
+
+CPPFLAGS += -DF_CPU=$(FREQ)UL -mmcu=$(MCU)
+
+# flags for the linker, choose appropriate linker script
+ifeq ($(findstring atmega256,$(MCU)),atmega256)
+  LDFLAGS += -T ld_scripts/avr6.x -Wl,-Map,image.map -mmcu=$(MCU)
+else
+  ifeq ($(findstring atmega128,$(MCU)),atmega128)
+    LDFLAGS += -T ld_scripts/avr51.x -Wl,-Map,image.map -mmcu=$(MCU)
+  else
+  	LDFLAGS += -T ld_scripts/avr5.x -Wl,-Map,image.map -mmcu=$(MCU)
+  endif
+endif
+
+endif # MAKECMDGOALS!=menuconfig
+endif # MAKECMDGOALS!=mrproper
 endif # MAKECMDGOALS!=clean
 
-ifeq ($(BOOTLOADER_SUPPORT),y)	
-	LDFLAGS += -Wl,--section-start=.text=0xE000
-	CFLAGS  += -mcall-prologues
+ifeq ($(BOOTLOADER_SUPPORT),y)  
+  LDFLAGS += -Wl,--section-start=.text=0xE000
+  CFLAGS  += -mcall-prologues
 endif
 
 

ld_scripts/elf_i386_obsd.xd

@@ -1,193 +0,0 @@
-/* Script for ld -pie: link position independent executable */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386",
-	      "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-SEARCH_DIR("/usr/lib");
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x90909090
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x90909090
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x90909090
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  . = ALIGN(0x20000000) + 0x0 ;
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x1000) - ((0x1000 - .) & (0x1000 - 1)); . = DATA_SEGMENT_ALIGN (0x1000, 0x1000);
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  PROVIDE (__openbsd_randomdata_start = .);
-  .openbsd.randomdata     :
-  {
-    *(.openbsd.randomdata .openbsd.randomdata.*)
-  }
-  PROVIDE (__openbsd_randomdata_end = .);
-  .data           :
-  {
-    __data_start = . ;
-    *(.data .data.* .gnu.linkonce.d.*)
-    PROVIDE (_eeprom_start__ = .);
-    *(.eeprom)
-    . = ALIGN(4) ;
-    PROVIDE (_game_descriptors_start__ = .);
-    *(.game_descriptors)
-    PROVIDE (_game_descriptors_end__ = .);
-    KEEP (*(.gnu.linkonce.d.*personality*))
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .jcr            : { KEEP (*(.jcr)) }
-  /* pad CTOR/DTOR, GOT (and PLT if DATA_PLT) to page aligned if PAD_GOT */
-  . = ALIGN(0x1000) + (. & (0x1000 - 1)); .gotpad0   : { __got_start = .; }
-  .got            : { *(.got.plt) *(.got) }
-  /* If PAD_CDTOR, CTOR and DTOR relocated here to receive mprotect
-     protection after relocation are finished same as GOT  */
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .gotpad1   : { __got_end = .;} . = ALIGN(0x1000) + (. & (0x1000 - 1));
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(32 / 8);
-  }
-  . = ALIGN(32 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}

ld_scripts/elf_x86_64_obsd.xd

@@ -1,193 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64",
-	      "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(_start)
-SEARCH_DIR("/usr/lib");
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0 + SIZEOF_HEADERS;
-  .interp         : { *(.interp) }
-  .hash           : { *(.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-  .rel.init       : { *(.rel.init) }
-  .rela.init      : { *(.rela.init) }
-  .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-  .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-  .rel.fini       : { *(.rel.fini) }
-  .rela.fini      : { *(.rela.fini) }
-  .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-  .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-  .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-  .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-  .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-  .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-  .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-  .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-  .rel.ctors      : { *(.rel.ctors) }
-  .rela.ctors     : { *(.rela.ctors) }
-  .rel.dtors      : { *(.rel.dtors) }
-  .rela.dtors     : { *(.rela.dtors) }
-  .rel.got        : { *(.rel.got) }
-  .rela.got       : { *(.rela.got) }
-  .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-  .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-  .rel.plt        : { *(.rel.plt) }
-  .rela.plt       : { *(.rela.plt) }
-  .init           :
-  {
-    KEEP (*(.init))
-  } =0x90909090
-  .plt            : { *(.plt) }
-  .text           :
-  {
-    *(.text .stub .text.* .gnu.linkonce.t.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0x90909090
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } =0x90909090
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-  . = ALIGN(0x100000) + (. & (0x100000 - 1)) + 0 ;
-  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
-  .rodata1        : { *(.rodata1) }
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN (0x100000) - ((0x100000 - .) & (0x100000 - 1)); . = DATA_SEGMENT_ALIGN (0x100000, 0x1000);
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(64 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) }
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) }
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) }
-  PROVIDE (__fini_array_end = .);
-  PROVIDE (__openbsd_randomdata_start = .);
-  .openbsd.randomdata     :
-  {
-    *(.openbsd.randomdata .openbsd.randomdata.*)
-  }
-  PROVIDE (__openbsd_randomdata_end = .);
-  .data           :
-  {
-    __data_start = . ;
-    *(.data .data.* .gnu.linkonce.d.*)
-    . = ALIGN(16);
-    PROVIDE (_eeprom_start__ = .);
-    *(.eeprom)
-    . = ALIGN(16);
-    PROVIDE (_game_descriptors_start__ = .);
-    *(.game_descriptors)
-    PROVIDE (_game_descriptors_end__ = .);
-    SORT(CONSTRUCTORS)
-  }
-  .data1          : { *(.data1) }
-  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-  .eh_frame       : { KEEP (*(.eh_frame)) }
-  .gcc_except_table   : { *(.gcc_except_table) }
-  .dynamic        : { *(.dynamic) }
-  .jcr            : { KEEP (*(.jcr)) }
-  /* pad CTOR/DTOR, GOT (and PLT if DATA_PLT) to page aligned if PAD_GOT */
-  . = ALIGN(0x100000) + (. & (0x100000 - 1)); .gotpad0   : { __got_start = .; }
-  .got            : { *(.got.plt) *(.got) }
-  /* If PAD_CDTOR, CTOR and DTOR relocated here to receive mprotect
-     protection after relocation are finished same as GOT  */
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin*.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  .dtors          :
-  {
-    KEEP (*crtbegin*.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  .gotpad1   : { __got_end = .;} . = ALIGN(0x100000) + (. & (0x100000 - 1));
-  _edata = .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .bss            :
-  {
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   . = ALIGN(64 / 8);
-  }
-  . = ALIGN(64 / 8);
-  _end = .;
-  PROVIDE (end = .);
-  . = DATA_SEGMENT_END (.);
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment       0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}

profiles/CTDO-Borg

@@ -1,164 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-
-#
-# General Setup
-#
-MCU=atmega644
-FREQ=16000000
-
-#
-# Borg Hardware
-#
-NUM_ROWS=16
-NUM_COLS=16
-NUMPLANE=3
-BORG_HW=HW_BORG_16
-
-#
-# Borg16 port setup
-#
-HIGH_CONTRAST=y
-UART_SUPPORT=y
-UART_BAUDRATE_SETTING=19200
-COLPORT1=PORTC
-COLPORT2=PORTA
-ROWPORT=PORTD
-PIN_MCLR=4
-PIN_CLK=6
-PIN_DATA=7
-# REVERSE_COLS is not set
-# INVERT_ROWS is not set
-# INTERLACED_ROWS is not set
-# INTERLACED_COLS is not set
-
-#
-# Features
-#
-RANDOM_SUPPORT=y
-# LAP_TIME_EXTENSION is not set
-SCROLLTEXT_SUPPORT=y
-SCROLLTEXT_FONT=FONT_ARIAL8
-SCROLLTEXT_BUFFER_SIZE=128
-SCROLL_X_SPEED=20
-SCROLL_Y_SPEED=20
-SCROLLTEXT_TEXT="d/#C#</#T#u/#D#>/#O#p2# #</#www.chaostreff-dortmund.de"
-# RFM12_SUPPORT is not set
-
-#
-# Joystick Support
-#
-JOYSTICK_SUPPORT=y
-JOYSTICK_CHOICE=JOY_PARALLEL
-
-#
-# Joystick Settings
-#
-PARALLEL_JOYSTICK_SUPPORT=y
-JOYSTICK_PIN_UP=PINB
-JOYSTICK_BIT_UP=0
-JOYSTICK_PIN_DOWN=PINB
-JOYSTICK_BIT_DOWN=1
-JOYSTICK_PIN_LEFT=PINB
-JOYSTICK_BIT_LEFT=2
-JOYSTICK_PIN_RIGHT=PINB
-JOYSTICK_BIT_RIGHT=3
-JOYSTICK_PIN_FIRE=PIND
-JOYSTICK_BIT_FIRE=3
-CAN_SUPPORT=y
-# SPI_HARDWARE is not set
-SPI_PORTIDX=1
-SPI_PIN_MOSI=5
-SPI_PIN_MISO=6
-SPI_PIN_SCK=7
-SPI_PIN_SS=4
-# CAN_INTERRUPT is not set
-SPI_REG_PIN_MCP_INT=PIND
-SPI_PIN_MCP_INT=2
-MENU_SUPPORT=y
-
-#
-# Games
-#
-GAME_TETRIS_CORE=y
-GAME_TETRIS=y
-GAME_BASTET=y
-GAME_TETRIS_FP=y
-GAME_SPACE_INVADERS=y
-GAME_SNAKE=y
-# SNAKE_POV_CONTROL is not set
-SNAKE_GAME_DELAY=200
-GAME_BREAKOUT=y
-GAME_KART=y
-
-#
-# Animations
-#
-ANIMATION_SCROLLTEXT=y
-ANIMATION_SPIRAL=y
-SPIRAL_DELAY=5
-ANIMATION_JOERN1=y
-ANIMATION_SNAKE=y
-SNAKE_ANIM_DELAY=100
-SNAKE_TERMINATION_DELAY=60
-SNAKE_MAX_LENGTH=64
-SNAKE_MAX_APPLES=10
-ANIMATION_CHECKERBOARD=y
-ANIMATION_FIRE=y
-FIRE_S=30
-FIRE_N=5
-FIRE_DIV=44
-FIRE_DELAY=50
-FIRE_CYCLES=800
-ANIMATION_MATRIX=y
-MATRIX_STREAMER_NUM=30
-MATRIX_CYCLES=500
-MATRIX_DELAY=60
-ANIMATION_RANDOM_BRIGHT=y
-ANIMATION_STONEFLY=y
-ANIMATION_FLYINGDOTS=y
-ANIMATION_GAMEOFLIFE=y
-GOL_DELAY=100
-GOL_CYCLES=360
-ANIMATION_BREAKOUT=y
-# ANIMATION_MHERWEG is not set
-ANIMATION_MOIRE=y
-ANIMATION_LTN_ANT=y
-# ANIMATION_TIME is not set
-TIME_MASTER_ADDR=0x00
-TIME_UPDATE_TIMEOUT=23
-ANIMATION_BMSCROLLER=y
-# ANIMATION_LABORLOGO is not set
-ANIMATION_AMPHIBIAN=y
-# ANIMATION_LOGO_OOS is not set
-ANIMATION_FAIRYDUST=y
-
-#
-# Fixed-point math patterns
-#
-ANIMATION_PLASMA=y
-FP_PLASMA_DELAY=1
-ANIMATION_PSYCHEDELIC=y
-FP_PSYCHO_DELAY=15
-ANIMATION_BLACKHOLE=y
-ANIMATION_DNA=y
-ANIMATION_SQUARES=y
-ANIMATION_TESTS=y
-ANIMATION_OFF=y
-
-#
-# small Animations
-#
-# SMALLANIMATION_ROWWALK is not set
-SMALLANIMATION_ROWWALK_SPEED=50
-SMALLANIMATION_ROWWALK_COUNT=10
-# SMALLANIMATION_COLWALK is not set
-SMALLANIMATION_COLWALK_SPEED=50
-SMALLANIMATION_COLWALK_COUNT=10
-# SMALLANIMATION_ROWBOUNCE is not set
-SMALLANIMATION_ROWBOUNCE_SPEED=50
-SMALLANIMATION_ROWBOUNCE_COUNT=10
-# SMALLANIMATION_COLBOUNCE is not set
-SMALLANIMATION_COLBOUNCE_SPEED=50
-SMALLANIMATION_COLBOUNCE_COUNT=10

profiles/LoL-Shield_Leonardo

@@ -20,11 +20,8 @@ BORG_HW=HW_LOLSHIELD
 # lolshield setup
 #
 USER_TIMER0_FOR_WAIT=1
-LOLSHIELD=y
-BRIGHTNESS=120
+BRIGHTNESS=127
 FRAMERATE=80
-# UART_SUPPORT is not set
-UART_BAUDRATE_SETTING=19200
 
 #
 # Features
@@ -57,10 +54,7 @@ GAME_TETRIS=y
 # GAME_TETRIS_FP is not set
 # GAME_SPACE_INVADERS is not set
 GAME_SNAKE=y
-# SNAKE_POV_CONTROL is not set
-SNAKE_GAME_DELAY=200
 GAME_BREAKOUT=y
-# GAME_KART is not set
 
 #
 # Animations
@@ -70,6 +64,7 @@ ANIMATION_SPIRAL=y
 SPIRAL_DELAY=5
 ANIMATION_JOERN1=y
 ANIMATION_SNAKE=y
+SNAKE_GAME_DELAY=200
 SNAKE_ANIM_DELAY=100
 SNAKE_TERMINATION_DELAY=60
 SNAKE_MAX_LENGTH=64
@@ -112,7 +107,6 @@ FP_PLASMA_DELAY=10
 ANIMATION_PSYCHEDELIC=y
 FP_PSYCHO_DELAY=25
 # ANIMATION_BLACKHOLE is not set
-# ANIMATION_DNA is not set
 ANIMATION_SQUARES=y
 # ANIMATION_TESTS is not set
 # ANIMATION_OFF is not set

profiles/LoL-Shield_Mega1280

@@ -20,11 +20,8 @@ BORG_HW=HW_LOLSHIELD
 # lolshield setup
 #
 USER_TIMER0_FOR_WAIT=1
-LOLSHIELD=y
-BRIGHTNESS=120
+BRIGHTNESS=127
 FRAMERATE=80
-# UART_SUPPORT is not set
-UART_BAUDRATE_SETTING=19200
 
 #
 # Features
@@ -57,10 +54,7 @@ GAME_BASTET=y
 # GAME_TETRIS_FP is not set
 GAME_SPACE_INVADERS=y
 GAME_SNAKE=y
-# SNAKE_POV_CONTROL is not set
-SNAKE_GAME_DELAY=200
 GAME_BREAKOUT=y
-# GAME_KART is not set
 
 #
 # Animations
@@ -70,6 +64,7 @@ ANIMATION_SPIRAL=y
 SPIRAL_DELAY=5
 ANIMATION_JOERN1=y
 ANIMATION_SNAKE=y
+SNAKE_GAME_DELAY=200
 SNAKE_ANIM_DELAY=100
 SNAKE_TERMINATION_DELAY=60
 SNAKE_MAX_LENGTH=64
@@ -112,7 +107,6 @@ FP_PLASMA_DELAY=10
 ANIMATION_PSYCHEDELIC=y
 FP_PSYCHO_DELAY=25
 ANIMATION_BLACKHOLE=y
-# ANIMATION_DNA is not set
 ANIMATION_SQUARES=y
 ANIMATION_TESTS=y
 ANIMATION_OFF=y

profiles/LoL-Shield_Mega2560

@@ -20,11 +20,8 @@ BORG_HW=HW_LOLSHIELD
 # lolshield setup
 #
 USER_TIMER0_FOR_WAIT=1
-LOLSHIELD=y
-BRIGHTNESS=120
+BRIGHTNESS=127
 FRAMERATE=80
-# UART_SUPPORT is not set
-UART_BAUDRATE_SETTING=19200
 
 #
 # Features
@@ -57,10 +54,7 @@ GAME_BASTET=y
 # GAME_TETRIS_FP is not set
 GAME_SPACE_INVADERS=y
 GAME_SNAKE=y
-# SNAKE_POV_CONTROL is not set
-SNAKE_GAME_DELAY=200
 GAME_BREAKOUT=y
-# GAME_KART is not set
 
 #
 # Animations
@@ -70,6 +64,7 @@ ANIMATION_SPIRAL=y
 SPIRAL_DELAY=5
 ANIMATION_JOERN1=y
 ANIMATION_SNAKE=y
+SNAKE_GAME_DELAY=200
 SNAKE_ANIM_DELAY=100
 SNAKE_TERMINATION_DELAY=60
 SNAKE_MAX_LENGTH=64
@@ -112,7 +107,6 @@ FP_PLASMA_DELAY=10
 ANIMATION_PSYCHEDELIC=y
 FP_PSYCHO_DELAY=25
 ANIMATION_BLACKHOLE=y
-# ANIMATION_DNA is not set
 ANIMATION_SQUARES=y
 ANIMATION_TESTS=y
 ANIMATION_OFF=y

profiles/LoL-Shield_Uno-Duemilanove-Diavolino

@@ -20,11 +20,8 @@ BORG_HW=HW_LOLSHIELD
 # lolshield setup
 #
 USER_TIMER0_FOR_WAIT=1
-LOLSHIELD=y
-BRIGHTNESS=120
+BRIGHTNESS=127
 FRAMERATE=80
-# UART_SUPPORT is not set
-UART_BAUDRATE_SETTING=19200
 
 #
 # Features
@@ -57,10 +54,7 @@ GAME_TETRIS=y
 # GAME_TETRIS_FP is not set
 # GAME_SPACE_INVADERS is not set
 GAME_SNAKE=y
-# SNAKE_POV_CONTROL is not set
-SNAKE_GAME_DELAY=200
 GAME_BREAKOUT=y
-# GAME_KART is not set
 
 #
 # Animations
@@ -70,6 +64,7 @@ ANIMATION_SPIRAL=y
 SPIRAL_DELAY=5
 ANIMATION_JOERN1=y
 ANIMATION_SNAKE=y
+SNAKE_GAME_DELAY=200
 SNAKE_ANIM_DELAY=100
 SNAKE_TERMINATION_DELAY=60
 SNAKE_MAX_LENGTH=64
@@ -112,7 +107,6 @@ FP_PLASMA_DELAY=10
 ANIMATION_PSYCHEDELIC=y
 FP_PSYCHO_DELAY=25
 ANIMATION_BLACKHOLE=y
-# ANIMATION_DNA is not set
 ANIMATION_SQUARES=y
 # ANIMATION_TESTS is not set
 # ANIMATION_OFF is not set

src/animations/Makefile

@@ -58,11 +58,6 @@ ifeq ($(ANIMATION_TIME),y)
   SRC += borg_time.c
 endif
 
-ifeq ($(ANIMATION_DNA),y)
-SRC += dna.c
-endif
-
-
 include $(MAKETOPDIR)/rules.mk
 
 include $(MAKETOPDIR)/depend.mk

src/animations/bitmapscroller/Makefile

@@ -22,6 +22,10 @@ ifeq ($(ANIMATION_FAIRYDUST),y)
   SRC += fairydust.c
 endif
 
+ifeq ($(ANIMATION_THISISNOTDETROIT),y)
+  SRC += thisisnotdetroit.c
+endif
+
 include $(MAKETOPDIR)/rules.mk
 
 include $(MAKETOPDIR)/depend.mk

src/animations/bitmapscroller/config.in

@@ -3,4 +3,5 @@ dep_bool_menu "Bitmap Scroller" ANIMATION_BMSCROLLER y $RANDOM_SUPPORT
 	dep_bool "Amphibian"        ANIMATION_AMPHIBIAN $ANIMATION_BMSCROLLER
 	dep_bool "Out of Spec Logo" ANIMATION_LOGO_OOS  $ANIMATION_BMSCROLLER
 	dep_bool "Fairydust"        ANIMATION_FAIRYDUST $ANIMATION_BMSCROLLER
+	dep_bool "This is not Detroit" ANIMATION_THISISNOTDETROIT $ANIMATION_BMSCROLLER
 endmenu	

src/animations/bitmapscroller/thisisnotdetroit.c

@@ -0,0 +1,141 @@
+#include <stdint.h>
+#include <assert.h>
+
+#include "../../compat/pgmspace.h"
+#include "bitmapscroller.h"
+#include "thisisnotdetroit.h"
+
+
+static uint8_t const athisIsNotDetroitBitmap[2][55][8] PROGMEM =
+	{{{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x80},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x60},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x20, 0x64},
+	  {0x00, 0x00, 0x00, 0x01, 0x01, 0x18, 0x03, 0x24},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0xe1, 0xd4},
+	  {0x00, 0x00, 0x00, 0x00, 0x01, 0x5f, 0xeb, 0x22},
+	  {0x00, 0x00, 0x00, 0x01, 0x11, 0xfe, 0x10, 0x00},
+	  {0x00, 0x00, 0x06, 0x8f, 0xa5, 0x18, 0x00, 0x00},
+	  {0x00, 0x00, 0x3f, 0xf0, 0xc0, 0x00, 0x00, 0x01},
+	  {0x01, 0x82, 0x7f, 0xfa, 0x00, 0x00, 0x00, 0x00},
+	  {0x03, 0xff, 0xff, 0x40, 0x00, 0x00, 0x00, 0x00},
+	  {0x0f, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x1f, 0xf6, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00},
+	  {0x09, 0xc0, 0x00, 0x37, 0xc0, 0x00, 0x00, 0x00},
+	  {0x38, 0x00, 0x0a, 0xe7, 0x40, 0x00, 0x00, 0x00},
+	  {0x38, 0x01, 0xce, 0xff, 0x00, 0x00, 0x00, 0x00},
+	  {0x3c, 0xbe, 0xce, 0xf7, 0xc0, 0x00, 0x00, 0x00},
+	  {0x3c, 0xfd, 0xce, 0xf3, 0xe0, 0x00, 0x00, 0x00},
+	  {0x1c, 0xf8, 0xfe, 0xf0, 0x60, 0x00, 0x00, 0x00},
+	  {0x04, 0x70, 0xfe, 0xf2, 0xe0, 0x00, 0x00, 0x00},
+	  {0x00, 0x70, 0xee, 0xff, 0xe0, 0x00, 0x00, 0x00},
+	  {0x00, 0x70, 0xce, 0xf0, 0x80, 0x06, 0xc0, 0x00},
+	  {0x00, 0x71, 0xce, 0x60, 0x02, 0x1f, 0x80, 0x00},
+	  {0x00, 0x71, 0xc0, 0x00, 0x1f, 0xdf, 0x40, 0x00},
+	  {0x00, 0x70, 0x00, 0x03, 0xbf, 0xd6, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0xf3, 0x3d, 0xc6, 0x00, 0x00},
+	  {0x00, 0x01, 0x40, 0xfb, 0xf1, 0xe6, 0x00, 0x00},
+	  {0x00, 0x21, 0xf0, 0xfb, 0xb8, 0xc6, 0x00, 0x00},
+	  {0x00, 0x77, 0x80, 0xfb, 0xf0, 0xe6, 0x00, 0x00},
+	  {0x00, 0x73, 0x80, 0xef, 0xbf, 0xc6, 0x00, 0x00},
+	  {0x00, 0x77, 0xe0, 0xef, 0xbf, 0x84, 0x00, 0x0c},
+	  {0x00, 0x71, 0xf0, 0xef, 0x8e, 0x00, 0x00, 0xf8},
+	  {0x00, 0x70, 0x70, 0xe7, 0x80, 0x00, 0x1b, 0xfc},
+	  {0x00, 0x73, 0xf0, 0xc0, 0x00, 0x0f, 0x1b, 0xf0},
+	  {0x00, 0x73, 0xe0, 0x00, 0x0c, 0x3f, 0x98, 0xf0},
+	  {0x00, 0x70, 0x40, 0x03, 0x7f, 0x7b, 0x98, 0xf0},
+	  {0x00, 0x60, 0x00, 0x5f, 0x7e, 0x73, 0xd8, 0xf0},
+	  {0x00, 0x00, 0x1f, 0x7f, 0x67, 0xf1, 0xd8, 0xf0},
+	  {0x00, 0x0e, 0x1f, 0x7c, 0x77, 0xe3, 0x98, 0xf0},
+	  {0x00, 0x3f, 0x1e, 0x1c, 0x7c, 0xf7, 0x9c, 0xe0},
+	  {0x00, 0x7f, 0xdb, 0x1c, 0x6e, 0x7f, 0x1c, 0x00},
+	  {0x00, 0x71, 0xdf, 0x1c, 0x7f, 0x3f, 0x00, 0x00},
+	  {0x00, 0x71, 0xdb, 0x1c, 0x67, 0x80, 0x00, 0x00},
+	  {0x00, 0x71, 0xdd, 0x1c, 0x50, 0x00, 0x00, 0x00},
+	  {0x00, 0x73, 0xdf, 0x18, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x7f, 0x1f, 0x80, 0x00, 0x00, 0xfc, 0x00},
+	  {0x00, 0x7e, 0x10, 0x00, 0x00, 0x7f, 0xf0, 0x00},
+	  {0x00, 0x68, 0x00, 0x00, 0x2f, 0xff, 0x90, 0x00},
+	  {0x00, 0x00, 0x00, 0x03, 0xfe, 0xa3, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x1f, 0xfd, 0x00, 0x00, 0x00},
+	  {0x00, 0x3c, 0x00, 0x0f, 0xa0, 0x00, 0x00, 0x00},
+	  {0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}},
+
+	 {{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x60},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x08},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x80, 0x2a},
+	  {0x00, 0x00, 0x00, 0x02, 0x40, 0x3f, 0xf0, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xc0, 0x00},
+	  {0x00, 0x00, 0x01, 0x41, 0xd7, 0xe0, 0x00, 0x02},
+	  {0x00, 0x00, 0x1f, 0xff, 0x80, 0x00, 0x00, 0x00},
+	  {0x00, 0x7d, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00},
+	  {0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0x00},
+	  {0x1f, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x0f, 0xf8, 0x00, 0x01, 0xc0, 0x00, 0x00, 0x00},
+	  {0x3e, 0x00, 0x00, 0x03, 0xe0, 0x00, 0x00, 0x00},
+	  {0x38, 0x00, 0x06, 0x77, 0xc0, 0x00, 0x00, 0x00},
+	  {0x18, 0x00, 0xce, 0x66, 0x00, 0x00, 0x00, 0x00},
+	  {0x18, 0x7d, 0xce, 0x67, 0xc0, 0x00, 0x00, 0x00},
+	  {0x1d, 0xfd, 0xce, 0x67, 0xe0, 0x00, 0x00, 0x00},
+	  {0x0d, 0xf1, 0xfe, 0x60, 0xe0, 0x00, 0x00, 0x00},
+	  {0x0c, 0x31, 0xfe, 0x67, 0xe0, 0x00, 0x00, 0x00},
+	  {0x00, 0x31, 0xce, 0x67, 0xc0, 0x00, 0x00, 0x00},
+	  {0x00, 0x31, 0xce, 0x67, 0x00, 0x01, 0xc0, 0x00},
+	  {0x00, 0x31, 0xce, 0x00, 0x00, 0x1f, 0xc0, 0x00},
+	  {0x00, 0x31, 0xc0, 0x00, 0x0f, 0x9f, 0x80, 0x00},
+	  {0x00, 0x30, 0x00, 0x03, 0x1f, 0xc7, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x73, 0xb9, 0xe7, 0x00, 0x00},
+	  {0x00, 0x00, 0xe0, 0x73, 0x38, 0xe7, 0x00, 0x00},
+	  {0x00, 0x13, 0xe0, 0x7b, 0x70, 0xe7, 0x00, 0x00},
+	  {0x00, 0x33, 0xe0, 0x7f, 0x39, 0xc7, 0x00, 0x00},
+	  {0x00, 0x37, 0x00, 0x7f, 0x3f, 0xc7, 0x00, 0x00},
+	  {0x00, 0x33, 0xe0, 0x6f, 0x3f, 0x80, 0x00, 0x00},
+	  {0x00, 0x33, 0xf0, 0x67, 0x1f, 0x00, 0x01, 0xfc},
+	  {0x00, 0x30, 0x70, 0x67, 0x00, 0x00, 0x1d, 0xf8},
+	  {0x00, 0x33, 0xf0, 0x60, 0x00, 0x1f, 0x1d, 0xe0},
+	  {0x00, 0x37, 0xe0, 0x00, 0x00, 0x3f, 0x9c, 0x60},
+	  {0x00, 0x33, 0x80, 0x00, 0x7e, 0x7f, 0xdc, 0x60},
+	  {0x00, 0x00, 0x00, 0x3f, 0x7f, 0x71, 0xdc, 0x60},
+	  {0x00, 0x00, 0x0f, 0x7f, 0x77, 0x61, 0xdc, 0x60},
+	  {0x00, 0x00, 0x1f, 0x7c, 0x7e, 0x71, 0xdc, 0x60},
+	  {0x00, 0x3f, 0x9c, 0x1c, 0x7e, 0x7b, 0x98, 0x60},
+	  {0x00, 0x3f, 0x9f, 0x1c, 0x7e, 0x7f, 0x98, 0x00},
+	  {0x00, 0x33, 0xdf, 0x1c, 0x67, 0x3e, 0x00, 0x00},
+	  {0x00, 0x31, 0xdc, 0x1c, 0x77, 0x00, 0x00, 0x00},
+	  {0x00, 0x31, 0xdb, 0x9c, 0x60, 0x00, 0x00, 0x00},
+	  {0x00, 0x33, 0x9f, 0x9c, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x3f, 0x9f, 0x00, 0x00, 0x01, 0xf8, 0x00},
+	  {0x00, 0x3f, 0x00, 0x00, 0x00, 0x1f, 0xf8, 0x00},
+	  {0x00, 0x30, 0x00, 0x00, 0x1f, 0xff, 0xe0, 0x00},
+	  {0x00, 0x00, 0x00, 0x0f, 0xff, 0x5c, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x1f, 0xf8, 0x00, 0x00, 0x00},
+	  {0x00, 0x1e, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	  {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}}};
+
+
+static uint8_t logo_thisIsNotDetroit_getChunk(unsigned char const nBitPlane,
+                                              unsigned char const nChunkX,
+                                              unsigned char const nChunkY,
+                                              unsigned int const nFrame)
+{
+	assert(nBitPlane < 2);
+	assert(nChunkX < 8);
+	assert(nChunkY < 55);
+
+	return pgm_read_byte(&athisIsNotDetroitBitmap[nBitPlane][nChunkY][nChunkX]);
+}
+
+
+void logo_thisIsNotDetroit()
+{
+	// width 64, height 55, 2 bitplanes (4 colors), 600 frames à 75ms
+	// frame change and viewport movement after every cyle (both dividers are 1)
+	bitmap_scroll(64, 55, 2, 600, 75, 1, 1, logo_thisIsNotDetroit_getChunk);
+}

src/animations/bitmapscroller/thisisnotdetroit.h

@@ -0,0 +1,6 @@
+#ifndef THISISNOTDETROIT_H_
+#define THISISNOTDETROIT_H_
+
+void logo_thisIsNotDetroit();
+
+#endif /* THISISNOTDETROIT_H_ */

src/animations/config.in

@@ -9,6 +9,7 @@ comment "Animations"
 	bool     "Joern1"        ANIMATION_JOERN1
 
 	dep_bool_menu "Snake"    ANIMATION_SNAKE         $RANDOM_SUPPORT
+		int  "Snake Game Round Delay"   SNAKE_GAME_DELAY        200
 		int  "Snake Anim Round Delay"   SNAKE_ANIM_DELAY        100
 		int  "Snake Termination Delay"  SNAKE_TERMINATION_DELAY  60
 		uint "Snake Max Length"         SNAKE_MAX_LENGTH         64
@@ -62,8 +63,6 @@ comment "Animations"
 	endmenu
 
 	bool     "Black Hole"       ANIMATION_BLACKHOLE
-	
-	bool     "DNA"       ANIMATION_DNA	$RANDOM_SUPPORT
 
 	dep_bool "Squares"          ANIMATION_SQUARES       $RANDOM_SUPPORT
 

src/animations/dna.c

@@ -1,114 +0,0 @@
-#include "../config.h"
-#include <stdint.h>
-#include "../random/prng.h"
-#include "../pixel.h"
-#include "../util.h"
-
-
-#define HEIGHT 12
-#define LINE_DISTANCE 4
-#define SIN_LENGTH 18
-#define SIN_MAX 6
-
-// uint8_t sin[SIN_LENGTH] = {0, 1, 2, 2, 3, 3, 4, 4, 4, 3, 3, 3, 2, 2, 1, 0};
-
-uint8_t sintab[SIN_LENGTH] = {
-		0,
-		1,
-		2,
-		3,
-		4,
-		5,
-		5,
-		6,
-		6,
-		6,
-		6,
-		6,
-		5,
-		5,
-		4,
-		3,
-		2,
-		1,
-		};
-
-
-/**
- * Shifts the Pixmap one px right
- */
-static void move(){
-		unsigned char plane, row, byte;
-
-		for(plane=0; plane<NUMPLANE; plane++){
-			for(row=NUM_ROWS; row--;){
-				for(byte=0; byte < LINEBYTES; byte++){
-					pixmap[plane][row][byte] = pixmap[plane][row][byte] >> 1;
-					if(byte < LINEBYTES-1){
-						pixmap[plane][row][byte] =
-								pixmap[plane][row][byte] |
-								(pixmap[plane][row][byte+1] & 0x01) << 7;
-					}
-				}
-			}
-		}
-}
-
-void dna(){
-	uint8_t mid = NUM_COLS / 2;
-	uint8_t draw_line = 0;
-
-	uint8_t top = 0;
-	uint8_t bottom = 0;
-
-	uint8_t top_color = 3;
-	uint8_t bottom_color = 2;
-
-	uint32_t c = 600;
-
-	uint8_t sinpos = 0;
-
-	int8_t direction = 1;
-
-	clear_screen(0);
-
-	while(c--){
-		top = mid - sintab[sinpos];
-		bottom = mid + sintab[sinpos];
-
-		setpixel((pixel){NUM_COLS-1,top}, top_color);
-		setpixel((pixel){NUM_COLS-1,bottom}, bottom_color);
-
-		if(draw_line == 0){
-			for(uint8_t linex = top+1; linex < bottom; linex++){
-				setpixel((pixel){NUM_COLS-1, linex}, 1);
-			}
-			setpixel((pixel){NUM_COLS-1, mid}, 1);
-		}
-
-		if(sinpos == 0){
-			if(mid-SIN_MAX <= 0){
-				direction = 1;
-			}
-			if(mid+SIN_MAX >= NUM_ROWS-1){
-				direction = -1;
-			}
-			mid = mid + (random8() > 200) * direction;
-		}
-
-		draw_line = (draw_line+1) % LINE_DISTANCE;
-		sinpos = (sinpos + 1) % SIN_LENGTH;
-
-		if(sinpos == 0){
-			uint8_t tmp_color = top_color;
-			top_color = bottom_color;
-			bottom_color = tmp_color;
-		}
-
-		wait(50);
-		move();
-	}
-
-
-}
-

src/animations/dna.h

@@ -1,13 +0,0 @@
-/*
- * dna.h
- *
- *  Created on: 15.07.2014
- *      Author: stefan
- */
-
-#ifndef DNA_H_
-#define DNA_H_
-
-void dna();
-
-#endif /* DNA_H_ */

src/animations/fpmath_patterns.c

@@ -20,20 +20,18 @@
 
 #ifdef DOXYGEN
 	/**
-	 * Low precision means that we use Q9.6 values and 16 bit types for almost
-	 * every calculation (with multiplication being a notable exception as its
-	 * interim results utilize 32 bit types).
+	 * Low precision means that we use Q10.5 values and 16 bit types for almost
+	 * every calculation (with multiplication and division as notable exceptions
+	 * as they and their interim results utilize 32 bit).
 	 *
-	 * Use this precision mode with care as image quality will suffer noticeably
-	 * at higher resolutions. This mode should not be used with resolutions
-	 * higher than 16x16 as overflows are likely to occur in interim
-	 * calculations. It produces leaner and faster code, though.
+	 * Use this precision mode with care as image quality will suffer
+	 * noticeably. It produces leaner and faster code, though. This mode should
+	 * not be used with resolutions higher than 16x16 as overflows are likely to
+	 * occur in interim calculations.
 	 *
-	 * Normal precision (i.e. #undef LOW_PRECISION) conforms to Q23.8 for actual
-	 * values and interim results. Operations like square root, sine, cosine,
-	 * multiplication etc. utilize 32 bit types. It's extremly slow on AVR, but
-	 * it's your only chance to run those animations on devices with resolutions
-	 * higher than 16x16.
+	 * Normal precision (i.e. #undef LOW_PRECISION) conforms to Q7.8 with the
+	 * ability to store every interim result as Q23.8. Most operations like
+	 * square root, sine, cosine, multiplication etc. utilize 32 bit types.
 	 */
 	#define FP_LOW_PRECISION
 #endif /* DOXYGEN */
@@ -68,18 +66,18 @@
 	// lookup table as well!
 
 	/** Multiply a number by this factor to convert it to a fixed-point value.*/
-	#define FIX           64
+	#define FIX           32
 	/**	Number of fractional bits of a value (i.e. ceil(log_2(FIX))). */
-	#define FIX_FRACBITS  6
+	#define FIX_FRACBITS  5
 	/**
 	 * The number of temporal quantization steps of the sine lookup table. It
 	 * must be a divisor of (FIX * 2 * pi) and this divisor must be divisable by
 	 * 4 itself. Approximate this value as close as possible to keep rounding
 	 * errors at a minimum.
 	 */
-	#define FIX_SIN_COUNT  200u
+	#define FIX_SIN_COUNT  200
 	/** The rounded down quotient of (FIX * 2 * pi) and FIX_SIN_COUNT */
-	#define FIX_SIN_DIVIDER 2u
+	#define FIX_SIN_DIVIDER 1
 
 	/** Type of the lookup table elements. */
 	typedef uint8_t lut_t;
@@ -87,26 +85,26 @@
 	/**
 	 * Lookup table of fractional parts which model the first quarter of a
 	 * sine period. The rest of that period is calculated by mirroring those
-	 * values. These values are intended for Q6 types.
+	 * values. These values are intended for Q5 types.
 	 */
 	static lut_t const fix_sine_lut[FIX_SIN_COUNT / 4] =
-		{  0,   2,   4,   6,   8,  10,  12,  14,
-		  16,  18,  20,  22,  24,  25,  27,  29,
-		  31,  33,  34,  36,  38,  39,  41,  42,
-		  44,  45,  47,  48,  49,  51,  52,  53,
-		  54,  55,  56,  57,  58,  59,  60,  60,
-		  61,  61,  62,  62,  63,  63,  63,  64,
-		  64,  64};
+		{  0,   1,   2,   3,   4,   5,   6,   7,
+		   8,   9,  10,  11,  12,  13,  14,  14,
+		  15,  16,  17,  18,  19,  20,  20,  21,
+		  22,  23,  23,  24,  25,  25,  26,  26,
+		  27,  27,  28,  28,  29,  29,  30,  30,
+		  30,  31,  31,  31,  31,  32,  32,  32,
+		  32,  32};
 
 #else
 	/** This is the type we expect ordinary integers to be. */
 	typedef int16_t  ordinary_int_t;
 	/** This is the type which we use for fixed-point values. */
-	typedef int32_t  fixp_t;
+	typedef int16_t  fixp_t;
 	/** This type covers arguments of fixSin() and fixCos(). */
 	typedef int32_t  fixp_trig_t;
 	/** This type covers interim results of fixed-point operations. */
-	typedef uint32_t  fixp_interim_t;
+	typedef int32_t  fixp_interim_t;
 	/** This type covers interim results of the fixSqrt() function. */
 	typedef uint32_t ufixp_interim_t;
 	/** Number of bits the fixSqrt() function can handle. */
@@ -125,12 +123,12 @@
 	 * 4 itself. Approximate this value as close as possible to keep rounding
 	 * errors at a minimum.
 	 */
-	#define FIX_SIN_COUNT  200u
+	#define FIX_SIN_COUNT  200
 	/** The rounded down quotient of (FIX * 2 * pi) and FIX_SIN_COUNT */
-	#define FIX_SIN_DIVIDER 8u
+	#define FIX_SIN_DIVIDER 8
 
 	/** Type of the lookup table elements. */
-	typedef int16_t lut_t;
+	typedef uint8_t lut_t;
 
 	/**
 	 * Lookup table of fractional parts which model the first quarter of a
@@ -144,7 +142,7 @@
 			 175, 181, 186, 192, 197, 202, 207, 211,
 			 216, 220, 224, 228, 231, 235, 238, 240,
 			 243, 245, 247, 249, 251, 252, 253, 254,
-			 255, 256};
+			 255, 255};
 
 #endif
 
@@ -254,14 +252,14 @@ static fixp_t fixSin(fixp_trig_t fAngle)
 
 /**
  * Fixed-point variant of the cosine function which takes a fixed-point angle
- * (radian). It substracts FIX_PI_2 from the given angle and consults the
- * fixSin() function for the final result.
+ * (radian). It adds FIX_PI_2 to the given angle and consults the fixSin()
+ * function for the final result.
  * @param fAngle A fixed-point value in radian.
  * @return Result of the cosine function normalized to a range from -FIX to FIX.
  */
-static inline fixp_t fixCos(fixp_trig_t const fAngle)
+static fixp_t fixCos(fixp_trig_t const fAngle)
 {
-	return fixSin(fAngle - FIX_PI_2);
+	return fixSin(fAngle + FIX_PI_2);
 }
 
 
@@ -277,11 +275,11 @@ static fixp_t fixSqrt(ufixp_interim_t const a)
 	nRoot = 0;  // clear root
 	nRemainingHigh = 0; // clear high part of partial remainder
 	nRemainingLow = a; // get argument into low part of partial remainder
-	nCount = ((SQRT_BITS - 1) + FIX_FRACBITS) / 2; // load loop counter
+	nCount = (SQRT_BITS / 2 - 1) + (FIX_FRACBITS >> 1); // load loop counter
 	do
 	{
 		nRemainingHigh =
-			(nRemainingHigh << 2) | (nRemainingLow >> (SQRT_BITS - 2));
+				(nRemainingHigh << 2) | (nRemainingLow >> (SQRT_BITS - 2));
 		nRemainingLow <<= 2; // get 2 bits of the argument
 		nRoot <<= 1;  // get ready for the next bit in the root
 		nTestDiv = (nRoot << 1) + 1; // test radical
@@ -453,16 +451,16 @@ static unsigned char fixAnimPlasma(unsigned char const x,
 	assert(x < (LINEBYTES * 8));
 	assert(y < NUM_ROWS);
 
+	// scaling factor
+	static fixp_t const fPlasmaX = (2 * PI * FIX) / NUM_COLS;
+
 	// reentrant data
 	fixp_plasma_t *const p = (fixp_plasma_t *)r;
 
-	// scaling factor
-	static fixp_t const fPlasmaX = FIX / 3.7;
-
 	if (x == 0 && y == 0)
 	{
-		p->fFunc2CosArg = NUM_COLS * (fixCos(t) + FIX);
-		p->fFunc2SinArg = NUM_ROWS * (fixSin(t) + FIX);
+		p->fFunc2CosArg = NUM_ROWS * fixCos(t) + fixScaleUp(NUM_ROWS);
+		p->fFunc2SinArg = NUM_COLS * fixSin(t) + fixScaleUp(NUM_COLS);
 		for (unsigned char i = LINEBYTES * 8u; i--;)
 		{
 			p->fFunc1[i] = fixSin(fixMul(fixScaleUp(i), fPlasmaX) + t);
@@ -472,8 +470,8 @@ static unsigned char fixAnimPlasma(unsigned char const x,
 	fixp_t const fFunc2 = fixSin(fixMul(fixDist(fixScaleUp(x), fixScaleUp(y),
 			p->fFunc2SinArg, p->fFunc2CosArg), fPlasmaX));
 
-	unsigned char const nRes = (fixMul(p->fFunc1[x] + fFunc2 +
-			2 * FIX, ((NUMPLANE + 1) / 4.0 - 0.05) * FIX)) / FIX;
+	unsigned char const nRes = (unsigned char)(fixMul(p->fFunc1[x] + fFunc2 +
+			fixScaleUp(2), ((NUMPLANE + 1) / 4.0 - 0.05) * FIX)) / FIX;
 	assert (nRes <= NUMPLANE);
 
 	return nRes;
@@ -486,12 +484,12 @@ void plasma(void)
 {
 	fixp_plasma_t r;
 #ifndef __AVR__
-	fixDrawPattern(0, fixScaleUp(75), 0.05 * FIX, 15, fixAnimPlasma, &r);
+	fixDrawPattern(0, fixScaleUp(75), 0.1 * FIX, 15, fixAnimPlasma, &r);
 #else
 	#ifndef FP_PLASMA_DELAY
 		#define FP_PLASMA_DELAY 1
 	#endif
-	fixDrawPattern(0, fixScaleUp(60), 0.05 * FIX,
+	fixDrawPattern(0, fixScaleUp(60), 0.1 * FIX,
 			FP_PLASMA_DELAY, fixAnimPlasma, &r);
 #endif /* __AVR__ */
 }
@@ -507,9 +505,9 @@ void plasma(void)
  */
 typedef struct fixp_psychedelic_s
 {
-	fixp_t fCos;        /**< X-coordinate of the curl's center. */
-	fixp_t fSin;        /**< Y-coordinate of the curl's center. */
-	fixp_t fPhaseShift; /**< Phase-shift for the flow effect. */
+	fixp_t fCos;         /**< One of the column factors of the curl. */
+	fixp_t fSin;         /**< One of the row factors of the curl. */
+	fixp_interim_t ft10; /**< A value involved in rotating the curl's center. */
 } fixp_psychedelic_t;
 
 
@@ -532,15 +530,15 @@ static unsigned char fixAnimPsychedelic(unsigned char const x,
 
 	if (x == 0 && y == 0)
 	{
-		p->fCos = (fixp_t)(NUM_COLS * 0.72) * (fixCos(t) + FIX);
-		p->fSin = (fixp_t)(NUM_ROWS * 0.72) * (fixSin(t) + FIX);
-		p->fPhaseShift = t * 8;
+		p->fCos = NUM_COLS/2 * fixCos(t);
+		p->fSin = NUM_ROWS/2 * fixSin(t);
+		p->ft10 = fixMul(t, fixScaleUp(10));
 	}
 
 	unsigned char const nResult =
-		fixMul(fixSin(fixDist(fixScaleUp(x), fixScaleUp(y),
-		p->fSin, p->fCos) - p->fPhaseShift) + FIX,
-		(fixp_t)((NUMPLANE - 1.05) * FIX)) / FIX;
+			(unsigned char)(fixMul(fixSin(fixDist(fixScaleUp(x), fixScaleUp(y),
+			p->fCos, p->fSin) - p->ft10) + fixScaleUp(1),
+			(fixp_t)((NUMPLANE - 1.05) * FIX))) / FIX;
 	assert(nResult <= NUMPLANE);
 
 	return nResult;

src/animations/program.c

@@ -1,5 +1,4 @@
 
-#include <stdbool.h>
 #include "../config.h"
 #include "../compat/pgmspace.h"
 #include "../random/prng.h"
@@ -10,43 +9,38 @@
 
 
 #ifdef ANIMATION_TESTS
-void test_level(unsigned char level, bool debug){
+void test_level(unsigned char level){
 	for (unsigned char y=NUM_ROWS;y--;){
 		for (unsigned char x=NUM_COLS;x--;){
 			setpixel((pixel){x,y}, level);
 			wait(5);
 		}
 	}
-	if (!debug) {
-		wait(2000);
-	}
+	wait(2000);
 }
 
-void test_palette(bool debug){
+void test_palette(){
 	for (unsigned char y=NUM_ROWS;y--;){
 		for (unsigned char x=NUM_COLS;x--;){
 			setpixel((pixel){x,y}, y%4);
 			// wait(1);
 		}
 	}
-	if (!debug) {
-		wait(2000);
-	}
+	wait(2000);
 }
 
-void test_palette2(bool debug){
+void test_palette2(){
 	for (unsigned char x=NUM_COLS;x--;){
 		for (unsigned char y=NUM_ROWS;y--;){
 			setpixel((pixel){x,y}, x%4);
+			// wait(1);
 		}
 	}
-	if (!debug) {
-		wait(1000);
-		for (unsigned char x=NUM_COLS;x--;){
-			// shift image right
-			shift_pixmap_l();
-			wait(30);
-		}
+	wait(1000);
+	for (unsigned char x=NUM_COLS;x--;){
+		// shift image right
+		shift_pixmap_l();
+		wait(30);
 	}
 }
 #endif

src/animations/program.h

@@ -1,14 +1,13 @@
 #ifndef PROGRAMM_H_
 #define PROGRAMM_H_
 
-#include <stdbool.h>
 #include "../pixel.h"
 #include "../util.h"
 
 
-void test_level(unsigned char level, bool debug);
-void test_palette(bool debug);
-void test_palette2(bool debug);
+void test_level(unsigned char level);
+void test_palette();
+void test_palette2();
 
 #ifdef ANIMATION_OFF
 inline static void off()

src/borg_hw/borg_hw_borg16.c

@@ -33,34 +33,15 @@
 #define COLDDR2  DDR(COLPORT2)
 #define ROWDDR   DDR(ROWPORT)
 
-#if defined(__AVR_ATmega164__)   || \
-    defined(__AVR_ATmega164P__)  || \
-    defined(__AVR_ATmega324__)   || \
-    defined(__AVR_ATmega324P__)  || \
-    defined(__AVR_ATmega644__)   || \
-    defined(__AVR_ATmega644P__)  || \
-    defined(__AVR_ATmega1284__)  || \
-    defined(__AVR_ATmega1284P__)
-#	define TIMER0_OFF()        TCCR0A = 0; TCCR0B = 0
-#	define TIMER0_CTC_CS256()  TCCR0A = _BV(WGM01); TCCR0B = _BV(CS02)
-#	define TIMER0_RESET()      TCNT0  = 0
-#	define TIMER0_COMPARE(t)   OCR0A  = t
-#	define TIMER0_INT_ENABLE() TIMSK0 = _BV(OCIE0A)
-#	define TIMER0_ISR          TIMER0_COMPA_vect
-#else // ATmega16/32
-#	define TIMER0_OFF()        TCCR0 = 0
-#	define TIMER0_CTC_CS256()  TCCR0 = _BV(WGM01) | _BV(CS02)
-#	define TIMER0_RESET()      TCNT0 = 0
-#	define TIMER0_COMPARE(t)   OCR0  = t
-#	define TIMER0_INT_ENABLE() TIMSK = _BV(OCIE0)
-#	define TIMER0_ISR          TIMER0_COMP_vect
+#if defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644__) || (__AVR_ATmega1284P__) || defined (__AVR_ATmega1284__)
+/* more ifdef magic :-( */
+#define OCR0 OCR0A
+#define TIMER0_COMP_vect TIMER0_COMPA_vect
 #endif
 
-
 // buffer which holds the currently shown frame
 unsigned char pixmap[NUMPLANE][NUM_ROWS][LINEBYTES];
 
-
 // switch to next row
 static void nextrow(uint8_t row) {
 	//reset states of preceding row
@@ -99,18 +80,12 @@ static void nextrow(uint8_t row) {
 	}
 }
 
-
 // show a row
 static void rowshow(unsigned char row, unsigned char plane) {
 	// depending on the currently drawn plane, display the row for a specific
 	// amount of time
-#ifdef HIGH_CONTRAST
-	static unsigned char const ocr_table[] = {2, 5, 22};
-#else
 	static unsigned char const ocr_table[] = {3, 4, 22};
-#endif
-
-	TIMER0_COMPARE(ocr_table[plane]);
+	OCR0 = ocr_table[plane];
 
 	// output data of the current row to the column drivers
 	uint8_t tmp, tmp1;
@@ -149,19 +124,19 @@ static void rowshow(unsigned char row, unsigned char plane) {
 
 }
 
-
-// interrupt handler
-ISR(TIMER0_ISR) {
+// depending on the plane this interrupt triggers at 50 kHz, 31.25 kHz or
+// 12.5 kHz
+ISR(TIMER0_COMP_vect) {
 	static unsigned char plane = 0;
 	static unsigned char row = 0;
 
+	// reset watchdog
+	wdt_reset();
+
 	// increment both row and plane
 	if (++plane == NUMPLANE) {
 		plane = 0;
 		if (++row == NUM_ROWS) {
-			// reset watchdog
-			wdt_reset();
-
 			row = 0;
 		}
 		nextrow(row);
@@ -171,26 +146,48 @@ ISR(TIMER0_ISR) {
 	rowshow(row, plane);
 }
 
-
-// disables timer, causing the watchdog to reset the MCU
 void timer0_off() {
 	cli();
+
 	COLPORT1 = 0;
 	COLPORT2 = 0;
 	ROWPORT = 0;
-	TIMER0_OFF();
+
+#if defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644__) || (__AVR_ATmega1284P__) || defined (__AVR_ATmega1284__)
+	TCCR0A = 0x00;
+	TCCR0B = 0x00;
+#else
+
+	TCCR0 = 0x00;
+#endif
 	sei();
 }
 
-
 // initialize timer which triggers the interrupt
 static void timer0_on() {
-	TIMER0_CTC_CS256();  // CTC mode, prescaling conforms to clk/256
-	TIMER0_RESET();      // set counter to 0
-	TIMER0_COMPARE(20);  // compare with this value first
-	TIMER0_INT_ENABLE(); // enable Timer/Counter0 Output Compare Match (A) Int.
-}
+	/* 	TCCR0: FOC0 WGM00 COM01 COM00 WGM01 CS02 CS01 CS00
+	 CS02 CS01 CS00
+	 0    0    0       stop
+	 0    0    1       clk
+	 0    1    0       clk/8
+	 0    1    1       clk/64
+	 1    0    0       clk/256
+	 1    0    1       clk/1024
+	 */
 
+#if defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644__) || (__AVR_ATmega1284P__) || defined (__AVR_ATmega1284__)
+	TCCR0A = 0x02; // CTC Mode
+	TCCR0B = 0x04; // clk/256
+	TCNT0  = 0;    // reset timer
+	OCR0   = 20;   // compare with this value
+	TIMSK0 = 0x02; // compare match Interrupt on
+#else
+	TCCR0  = 0x0C; // CTC Mode, clk/256
+	TCNT0  = 0;    // reset timer
+	OCR0   = 20;   // compare with this value
+	TIMSK  = 0x02; // compare match Interrupt on
+#endif
+}
 
 void borg_hw_init() {
 	// switch column ports to output mode
@@ -211,5 +208,5 @@ void borg_hw_init() {
 
 	// activate watchdog timer
 	wdt_reset();
-	wdt_enable(WDTO_15MS); // 15ms watchdog
+	wdt_enable(0x00); // 17ms watchdog
 }

src/borg_hw/borg_hw_lolshield.c

@@ -973,27 +973,3 @@ void borg_hw_init() {
 	wdt_reset();
 	wdt_enable(WDTO_15MS); // 15ms watchdog
 }
-
-void timer0_off() {
-	cli();
-#if defined (__AVR_ATmega48__)   || \
-    defined (__AVR_ATmega48P__)  || \
-    defined (__AVR_ATmega88__)   || \
-    defined (__AVR_ATmega88P__)  || \
-    defined (__AVR_ATmega168__)  || \
-    defined (__AVR_ATmega168P__) || \
-    defined (__AVR_ATmega328__)  || \
-    defined (__AVR_ATmega328P__) || \
-    defined (__AVR_ATmega1280__) || \
-    defined (__AVR_ATmega2560__)
-	TCCR2A = 0x00;
-	TCCR2B = 0x00;
-#elif defined (__AVR_ATmega8__) || \
-      defined (__AVR_ATmega128__)
-	TCCR2 = 0x00;
-#elif defined (__AVR_ATmega32U4__)
-	TCCR1A = 0x00;
-	TCCR1B = 0x00;
-#endif
-	sei();
-}

src/borg_hw/config_borg16.in

@@ -17,21 +17,6 @@ comment "Borg16 port setup"
 #//das dier sind die individuellen Dateneingänge für die Schieberegister
 #define PIN_SHFT1 PD7
 
-bool "Higher Contrast" HIGH_CONTRAST n
-
-bool "UART Support" UART_SUPPORT n
-choice 'Baud Rate'			\
-   "2400 2400 \
-    4800 4800 \
-    9600 9600 \
-    14400 14400 \
-    19200 19200 \
-    28800 28800 \
-    38400 38400 \
-    57600 57600 \
-    76800 76800 \
-    115200 115200" \
-   '19200' UART_BAUDRATE_SETTING
 
 choice 'Column Port 1 (right)'			\
    "PORTA  PORTA \

src/borg_hw/config_lolshield.in

@@ -2,23 +2,8 @@ mainmenu_option next_comment
 comment "lolshield setup"
 
 define_int USER_TIMER0_FOR_WAIT 1
-define_bool LOLSHIELD y
 
-uint "Brightness (0-127)"     BRIGHTNESS 120
+uint "Brightness (0-127)"     BRIGHTNESS 127
 uint "Framerate (default 80)" FRAMERATE   80
 
-bool "UART Support" UART_SUPPORT n
-choice 'Baud Rate'			\
-   "2400 2400 \
-    4800 4800 \
-    9600 9600 \
-    14400 14400 \
-    19200 19200 \
-    28800 28800 \
-    38400 38400 \
-    57600 57600 \
-    76800 76800 \
-    115200 115200" \
-   '19200' UART_BAUDRATE_SETTING
-
 endmenu

src/config.h

@@ -33,8 +33,6 @@
 
 #define INIT_EEPROM
 
-#if defined(UART_SUPPORT) && defined(LOLSHIELD) && defined(__AVR_ATmega32U4__)
-#	error UART not supported on Arduino Leonardo
-#endif
+//#define UART_BAUD_RATE 115200L
 
 #endif /* CONFIG_H_ */

src/display_loop.c

@@ -1,6 +1,5 @@
 
 #include <setjmp.h>
-#include <stdbool.h>
 #include <stdio.h>
 
 #include "config.h"
@@ -8,7 +7,6 @@
 #include "animations/snake.h"
 #include "animations/program.h"
 #include "animations/matrix.h"
-#include "animations/dna.h"
 #include "animations/gameoflife.h"
 #include "animations/stonefly.h"
 #include "animations/flyingdots.h"
@@ -18,6 +16,7 @@
 #include "animations/bitmapscroller/amphibian.h"
 #include "animations/bitmapscroller/outofspec.h"
 #include "animations/bitmapscroller/fairydust.h"
+#include "animations/bitmapscroller/thisisnotdetroit.h"
 #include "animations/fpmath_patterns.h"
 #include "animations/mherweg.h"
 #include "animations/moire.h"
@@ -50,7 +49,7 @@
 #  include "joystick/joystick.h"
 #endif
 
-volatile unsigned char oldMode, oldOldmode, reverseMode, mode;
+volatile unsigned char oldMode, oldOldmode, mode;
 
 jmp_buf newmode_jmpbuf;
 
@@ -67,12 +66,6 @@ void display_loop(){
 //	mcuf_serial_mode();
 
 	mode = setjmp(newmode_jmpbuf);
-
-#ifdef JOYSTICK_SUPPORT
-	// in case we get here via mode jump, we (re)enable joystick queries
-	waitForFire = 1;
-#endif
-
 	oldOldmode = oldMode;
 
 #ifdef JOYSTICK_SUPPORT
@@ -84,7 +77,6 @@ void display_loop(){
 		clear_screen(0);
 #endif
 		oldMode = mode;
-
 		switch(mode++) {
 
 #ifdef ANIMATION_SCROLLTEXT
@@ -94,8 +86,7 @@ void display_loop(){
 	#ifdef RANDOM_SUPPORT
 			{
 				char a[28];
-				sprintf(a,"</# counter == %lu  ",
-					(unsigned long)percnt_get(&g_reset_counter, &g_reset_counter_idx));
+				sprintf(a,"</# counter == %lu  ", (unsigned long) percnt_get());
 				scrolltext(a);
 			}
 	#endif
@@ -236,52 +227,52 @@ void display_loop(){
 			break;
 #endif
 
-#ifdef ANIMATION_PLASMA
+#ifdef ANIMATION_THISISNOTDETROIT
 		case 22:
+			logo_thisIsNotDetroit();
+			break;
+#endif
+
+#ifdef ANIMATION_PLASMA
+		case 23:
 			plasma();
 			break;
 #endif
 
 #ifdef ANIMATION_PSYCHEDELIC
-		case 23:
+		case 24:
 			psychedelic();
 			break;
 #endif
 
 #ifdef ANIMATION_BLACKHOLE
-		case 24:
+		case 25:
 			blackhole();
 			break;
 #endif
 
 #ifdef ANIMATION_SQUARES
-		case 25:
-			squares();
-			break;
-#endif
-
-#ifdef ANIMATION_DNA
 		case 26:
-			dna();
+			squares();
 			break;
 #endif
 
 #ifdef ANIMATION_TESTS
 		case 31:
-			test_level(1, false);
+			test_level(1);
 			break;
 
 		case 32:
-			test_level(2, false);
+			test_level(2);
 			break;
 
 		case 33:
-			test_level(3, false);
+			test_level(3);
 			break;
 
 		case 35:
-			test_palette(false);
-			test_palette2(false);
+			test_palette();
+			test_palette2();
 			break;
 #endif
 
@@ -308,26 +299,26 @@ void display_loop(){
 #endif
 
 #ifdef MENU_SUPPORT
-		case 0xFDu:
+		case 42:
 			mode = 1;
 			break;
 
-		case 0xFEu:
+		case 43:
 			menu();
 			mode = oldOldmode;
 			break;
 #else
 
-		case 0xFDu:
+		case 42:
 #ifdef JOYSTICK_SUPPORT
 			if (JOYISFIRE)
-				mode = 0xFEu;
+				mode = 43;
 			else
 #endif
 				mode = 1;
 			break;
 
-		case 0xFEu:
+		case 43:
 #ifdef JOYSTICK_SUPPORT
 			waitForFire = 0;   // avoid circular jumps
 			while (JOYISFIRE); // wait until user released the fire button
@@ -370,19 +361,10 @@ void display_loop(){
 #endif
 
 #ifdef ANIMATION_OFF
-		case 0xFFu:
+		case 0xFF:
 			off();
 			break;
 #endif
-		default:
-			if (reverseMode) {
-				if (reverseMode-- == (mode - 1)) {
-					mode -= 2;
-				} else {
-					reverseMode = 0;
-				}
-			}
-			break;
 		}
 	}
 }

src/games/config.in

@@ -7,13 +7,7 @@ comment "Games"
 	endmenu
 	
 	dep_bool "Space Invaders" GAME_SPACE_INVADERS $JOYSTICK_SUPPORT $RANDOM_SUPPORT
-
-	dep_bool_menu "Snake"  GAME_SNAKE y $JOYSTICK_SUPPORT $RANDOM_SUPPORT
-		bool "POV Controls"           SNAKE_POV_CONTROL n
-		int  "Snake Game Round Delay" SNAKE_GAME_DELAY  200
-	endmenu
-
+	dep_bool "Snake"          GAME_SNAKE          $JOYSTICK_SUPPORT $RANDOM_SUPPORT
 	dep_bool "Breakout"       GAME_BREAKOUT       $JOYSTICK_SUPPORT $RANDOM_SUPPORT
-
 	dep_bool "Kart"       	  GAME_KART           $JOYSTICK_SUPPORT $RANDOM_SUPPORT
 endmenu

src/games/kart/kart.c

@@ -224,7 +224,7 @@ void kart_game(){
 		wait(WAIT);
 	}
 
-	snprintf(game_over, sizeof(game_over), "</#Game Over, Score: %lu",  cycle);
+	snprintf(game_over, sizeof(game_over), "</#Game Over, Score: %i",  cycle);
 	scrolltext(game_over);
 }
 

src/games/snake/snake_game.c

@@ -12,7 +12,6 @@
 
 #include <assert.h>
 #include <stdint.h>
-#include <stdbool.h>
 #include "../../config.h"
 #include "../../compat/pgmspace.h"
 #include "../../pixel.h"
@@ -37,13 +36,11 @@ game_descriptor_t snake_game_descriptor __attribute__((section(".game_descriptor
 #endif
 
 
-#ifdef DOXYGEN
-	/**
-	 * If defined, joystick controls are bound to the point of view of the
-	 * snake, i.e. only the left an right joystick direction can be used.
-	 */
-	#define SNAKE_POV_CONTROL
-#endif
+/**
+ * If defined, joystick controls are NOT as "seen" by the snake but absolute,
+ * that is, if pressing up, snake goes up, etc.
+ */
+#define SNAKE_NEWCONTROL
 
 #if !defined USNAKE_MAX_LENGTH || defined DOXYGEN
 	/** The maximum length of the snake. */
@@ -105,8 +102,6 @@ typedef struct snake_protagonist_s
 	uint8_t nHeadIndex;                 /**< Index of the head segment. */
 	uint8_t nTailIndex;                 /**< Index of the tail segment. */
 	snake_dir_t dir;                    /**< Direction of the snake.    */
-	bool bJoystickLocked;               /**< Avoid double joytick queries
-	                                         between movements. */
 } snake_protagonist_t;
 
 
@@ -218,7 +213,6 @@ static void snake_initGameProtagonist(snake_protagonist_t *pprotSnake)
 #endif
 	pprotSnake->nTailIndex = 0;
 	pprotSnake->nHeadIndex = 1;
-	pprotSnake->bJoystickLocked = false;
 }
 
 #ifdef GAME_SNAKE
@@ -231,10 +225,17 @@ static void snake_userControl(snake_protagonist_t *pprotSnake,
                               snake_dir_t *pdirLast)
 {
 	snake_dir_t dirJoystick = snake_queryJoystick();
-#	ifdef SNAKE_POV_CONTROL
-
-	if ((dirJoystick ^ *pdirLast) && (dirJoystick != SNAKE_DIR_NONE) &&
-			(!pprotSnake->bJoystickLocked))
+#ifdef SNAKE_NEWCONTROL
+	if (dirJoystick != SNAKE_DIR_NONE)
+	{
+		// valid transitions can only be uneven
+		if ((pprotSnake->dir + dirJoystick) & 0x01)
+		{
+			pprotSnake->dir = dirJoystick;
+		}
+	}
+#else
+	if ((dirJoystick ^ *pdirLast) && (dirJoystick != SNAKE_DIR_NONE))
 	{
 		// only left or right movements are valid
 		if (dirJoystick & 0x01)
@@ -243,25 +244,9 @@ static void snake_userControl(snake_protagonist_t *pprotSnake,
 			pprotSnake->dir = (pprotSnake->dir +
 					(dirJoystick == SNAKE_DIR_LEFT ? 3 : 1)) % 4u;
 		}
-		// we query the joystick twice as fast as we move the snake, so we
-		// have to ensure that it does not bite its head with its head...uh
-		pprotSnake->bJoystickLocked = true;
 	}
 	*pdirLast = dirJoystick;
-#	else
-	if (dirJoystick != SNAKE_DIR_NONE)
-	{
-		// valid transitions can only be uneven
-		if (((pprotSnake->dir + dirJoystick) & 0x01) &&
-				!pprotSnake->bJoystickLocked)
-		{
-			pprotSnake->dir = dirJoystick;
-		}
-		// we query the joystick twice as fast as we move the snake, so we
-		// have to ensure that it does not bite its head with its head...uh
-		pprotSnake->bJoystickLocked = true;
-	}
-#	endif
+#endif
 }
 #endif
 
@@ -377,9 +362,9 @@ static void snake_initApples(snake_apples_t *pApples)
  * Checks for an apple at a given position and removes it if there is one.
  * @param pApples The set of apples which are lying on the playing field.
  * @param pxHead The position to be tested.
- * @return false if no apples were found, true otherwise
+ * @return 0 if no apples were found, 1 otherwise
  */
-static bool snake_checkForApple(snake_apples_t *pApples, pixel pxHead)
+static uint8_t snake_checkForApple(snake_apples_t *pApples, pixel pxHead)
 {
 	for (uint8_t i = pApples->nAppleCount; i--;)
 	{
@@ -391,10 +376,10 @@ static bool snake_checkForApple(snake_apples_t *pApples, pixel pxHead)
 				pApples->aApples[i] = pApples->aApples[i + 1];
 			}
 			--pApples->nAppleCount;
-			return true;
+			return 1;
 		}
 	}
-	return false;
+	return 0;
 }
 
 
@@ -434,7 +419,7 @@ void snake_engine(uint8_t bDemoMode)
 	clear_screen(0);
 	snake_drawBorder();
 
-	for (uint8_t nTick = 0; true; nTick ^= SNAKE_COLOR_APPLE)
+	for (uint8_t nTick = 0; 1; nTick ^= SNAKE_COLOR_APPLE)
 	{
 		// determine new direction
 #if defined ANIMATION_SNAKE && defined GAME_SNAKE
@@ -454,8 +439,6 @@ void snake_engine(uint8_t bDemoMode)
 		snake_userControl(&protSnake, &dirLast);
 		if (nTick) {
 #endif
-			// release joystick lock
-			protSnake.bJoystickLocked = false;
 
 			// actually move head
 			pixel pxOldHead = protSnake.aSegments[protSnake.nHeadIndex];

src/games/space_invaders/invader_init.c

@@ -100,7 +100,7 @@ void initInvaders(Invaders * iv, unsigned char lv)
 			uint16_t mask = 0x0001;
 			for (x = 11; x--;)
 			{
-				iv->map[x][y] = (hansrow & mask) ? 2 : 1;
+				iv->map[x][y] = (hansrow & mask) ? 3 : 1;
 				mask <<= 1;
 			}
 		}
@@ -108,7 +108,7 @@ void initInvaders(Invaders * iv, unsigned char lv)
 		iv->pos.x = (NUM_COLS - 11) / 2;
 		iv->pos.y = SPACESHIP_LINE + 1;
 
-		iv->speed = MIN_SPEED + 40;
+		iv->speed = MIN_SPEED + 2;
 		iv->direction = 1;
 		break;
 

src/games/tetris/highscore.c

@@ -109,7 +109,6 @@ uint16_t tetris_highscore_inputName(void)
 
 uint16_t tetris_highscore_retrieveHighScore(tetris_highscore_index_t nIndex)
 {
-	eeprom_busy_wait();
 	uint16_t nHighScore =
 			eeprom_read_word(&g_highScoreTable.nHighScore[nIndex]);
 

src/games/tetris/highscore.h

@@ -78,7 +78,6 @@ void tetris_highscore_saveHighScore(tetris_highscore_index_t nIndex,
 {
 	if (nHighScore > tetris_highscore_retrieveHighScore(nIndex))
 	{
-		eeprom_busy_wait();
 		eeprom_write_word(&g_highScoreTable.nHighScore[nIndex], nHighScore);
 	}
 }
@@ -92,7 +91,6 @@ void tetris_highscore_saveHighScore(tetris_highscore_index_t nIndex,
 inline static
 uint16_t tetris_highscore_retrieveHighScoreName(tetris_highscore_index_t nIdx)
 {
-	eeprom_busy_wait();
 	uint16_t nHighScoreName =
 			eeprom_read_word(&g_highScoreTable.nHighScoreName[nIdx]);
 
@@ -109,7 +107,6 @@ inline static
 void tetris_highscore_saveHighScoreName(tetris_highscore_index_t nIndex,
                                         uint16_t nHighscoreName)
 {
-	eeprom_busy_wait();
 	eeprom_write_word(&g_highScoreTable.nHighScoreName[nIndex], nHighscoreName);
 }
 

src/games/tetris/input.c

@@ -50,11 +50,11 @@
 #define TETRIS_INPUT_REPEAT_DELAY 5
 
 /** Number of loop cyles the left button is ignored */
-#define TETRIS_INPUT_CHATTER_TICKS_LEFT    24
+#define TETRIS_INPUT_CHATTER_TICKS_LEFT    12
 /** Number of loop cyles the right button is ignored */
-#define TETRIS_INPUT_CHATTER_TICKS_RIGHT   24
+#define TETRIS_INPUT_CHATTER_TICKS_RIGHT   12
 /** Number of loop cyles the down button is ignored */
-#define TETRIS_INPUT_CHATTER_TICKS_DOWN    24
+#define TETRIS_INPUT_CHATTER_TICKS_DOWN    12
 /** Number of loop cyles the clockwise rotation button is ignored */
 #define TETRIS_INPUT_CHATTER_TICKS_ROT_CW  24
 /** Number of loop cyles the counter clockwise rotation button is ignored */

src/games/tetris/view.c

@@ -52,8 +52,7 @@
 /** color of line counter */
 #define TETRIS_VIEW_COLORCOUNTER 2
 
-#if (((NUM_ROWS < 16) && (NUM_COLS > NUM_ROWS)) || \
-	((NUM_ROWS == 16) && (NUM_COLS == 80))) && (!defined GAME_TETRIS_FP)
+#if (NUM_ROWS < 16) && (NUM_COLS > NUM_ROWS) && (!defined GAME_TETRIS_FP)
 #	define VIEWCOLS NUM_ROWS
 #	define VIEWROWS NUM_COLS
 #	define VIEW_TILT
@@ -78,8 +77,7 @@
 	#if VIEWROWS >= 16
 		#define TETRIS_VIEW_XOFFSET_COUNTER \
 				(TETRIS_VIEW_XOFFSET_DUMP + TETRIS_VIEW_WIDTH_DUMP + 1)
-		#define TETRIS_VIEW_YOFFSET_COUNT100 + \
-				TETRIS_VIEW_YOFFSET_DUMP + ((TETRIS_VIEW_HEIGHT_DUMP - 14) / 2)
+		#define TETRIS_VIEW_YOFFSET_COUNT100 ((VIEWCOLS - 14) / 2)
 		#define TETRIS_VIEW_YOFFSET_COUNT10  (TETRIS_VIEW_YOFFSET_COUNT100 + 2)
 		#define TETRIS_VIEW_YOFFSET_COUNT1   (TETRIS_VIEW_YOFFSET_COUNT10 + 4)
 

src/main.c

@@ -1,7 +1,6 @@
 
 #include <setjmp.h>
 #include <avr/interrupt.h>
-#include <avr/pgmspace.h>
 #include <stdio.h>
 
 #include "config.h"
@@ -20,10 +19,6 @@
 	#include "can/borg_can.h"
 #endif
 
-#ifdef UART_SUPPORT
-#    include "uart/uart.h"
-#endif
-
 #ifdef RFM12_SUPPORT
 	#include "rfm12/borg_rfm12.h"
 #endif
@@ -32,8 +27,8 @@ int main (void){
 	clear_screen(0);
 
 #ifdef RANDOM_SUPPORT
-	srandom32(percnt_get(&g_reset_counter, &g_reset_counter_idx));
-	percnt_inc(&g_reset_counter, &g_reset_counter_idx);
+	srandom32(percnt_get());
+	percnt_inc();
 #endif
 
 #ifdef RFM12_SUPPORT
@@ -46,14 +41,14 @@ int main (void){
 	bcan_init();
 #endif
 
-#ifdef UART_SUPPORT
-	uart_init(UART_BAUD_SELECT(UART_BAUDRATE_SETTING, F_CPU));
-#endif
-
 #ifdef JOYSTICK_SUPPORT
 	joy_init();	
 #endif
 
+#ifdef UART_SUPPORT
+	uart_init();
+#endif
+
 	sei();
 
 	display_loop();

src/random/persistentCounter.c

@@ -9,105 +9,103 @@
 #include "../compat/interrupt.h" /* cli() & sei() */
 #include "../compat/eeprom.h"
 #include "../config.h"
-#include "persistentCounter.h"
 
 #ifdef ERROR_HANDLING
-#	include "error-handling.h"
-#	define PERSISTENT_COUNTER_OVERFLOW		(void*)0, 2,4,1
-#	define PERSISTENT_COUNTER_WRITER_ERROR	(void*)0, 2,4,2
+	#include "error-handling.h"
+	#define PERSISTENT_COUNTER_OVERFLOW		(void*)0, 2,4,1
+	#define PERSISTENT_COUNTER_WRITER_ERROR	(void*)0, 2,4,2
 #endif
 
-uint8_t g_reset_counter_idx = 0xff;
-percnt_t EEMEM g_reset_counter;
+#define RING_SIZE 168
+
+uint8_t ring_idx = 0xff;
+
+uint16_t  EEMEM B08_23;
+uint8_t EEMEM B0_7[RING_SIZE];
 
 #ifdef INIT_EEPROM
-void init_buffer(percnt_t *percnt, uint8_t *ring_index) {
+void init_buffer(void){
 	uint8_t i;
 	eeprom_busy_wait();
-	eeprom_write_word(&(percnt->B08_23), 0x0000);
-	for (i = 0; i < RING_SIZE; ++i) {
+	eeprom_write_word(&B08_23, 0x0000);
+	for(i=0; i<RING_SIZE; ++i){
 		eeprom_busy_wait();
-		eeprom_write_byte(&(percnt->B0_7[i]), 0x00);
+		eeprom_write_byte(&(B0_7[i]), 0x00);
 	}
 }
 #endif
 
-void percnt_init(percnt_t *percnt, uint8_t *ring_index) {
+void percnt_init(void){
 	uint8_t i;
-	uint8_t maxidx = 0;
-	uint8_t t, max = eeprom_read_byte(&(percnt->B0_7[0]));
-#ifdef INIT_EEPROM
-	/* test if the 2 MSB == 0xFFFF */
-	if (eeprom_read_word(&(percnt->B08_23)) == 0xFFFF) {
-		/* test the first two bytes of ringbuffer */
-		if (eeprom_read_word((uint16_t*) &(percnt->B0_7[0])) == 0xFFFF)
-			init_buffer(percnt, ring_index);
-	}
-#endif
-	/* might be faster, but such optimizations are prone to timing attacks */
-	for (i = 0; i < RING_SIZE; ++i) {
+	uint8_t maxidx=0;
+	uint8_t t,max=eeprom_read_byte(&(B0_7[0]));
+	#ifdef INIT_EEPROM
+		if (eeprom_read_word(&B08_23)==0xFFFF){	/* test if the 2 MSB == 0xFFFF*/
+			if (eeprom_read_word((uint16_t*)&(B0_7[0]))==0xFFFF) /* test the first to bytes of ringbuffer*/
+				init_buffer();
+		}
+	#endif
+	for(i=0; i<RING_SIZE; ++i){ /* this might be speed up, but such optimisation could lead to timing attacks */
 		eeprom_busy_wait();
-		t = eeprom_read_byte(&(percnt->B0_7[i]));
-		if (t == max + 1) {
-			max = t;
-			maxidx = i;
+		t=eeprom_read_byte(&(B0_7[i]));
+		if(t==max+1){
+			max=t;
+			maxidx=i;
 		}
 	}
-	*ring_index = (maxidx == RING_SIZE) ? 0 : maxidx;
+	ring_idx = (maxidx==RING_SIZE)?0:maxidx;
 }
 
-uint32_t percnt_get(percnt_t *percnt, uint8_t *ring_index) {
-	uint32_t ret = 0;
+uint32_t percnt_get(void){
+	uint32_t ret=0;
 
-	if (*ring_index == 0xff)
-		percnt_init(percnt, ring_index);
+	if(ring_idx==0xff)
+		percnt_init();
 	cli();
 	eeprom_busy_wait();
-	ret = eeprom_read_word(&(percnt->B08_23)) << 8;
+	ret=eeprom_read_word(&B08_23)<<8;
 	eeprom_busy_wait();
-	ret |= eeprom_read_byte(&(percnt->B0_7[*ring_index]));
+	ret |= eeprom_read_byte(&(B0_7[ring_idx]));
 	sei();
 	return ret;
 }
 
-void percnt_inc(percnt_t *percnt, uint8_t *ring_index) {
+void percnt_inc(void){
 	/* we must make this resistant agaist power off while this is running ... */
 	uint32_t u;
+		
+	if(ring_idx==0xff)
+		percnt_init();
 
-	if (*ring_index == 0xff)
-		percnt_init(percnt, ring_index);
-
-	u = percnt_get(percnt, ring_index);
+	u = percnt_get();
 	cli();
 	/* it's important to write msb first! */
-	if ((u & 0x000000ff) == 0xff) {
-		if ((u & 0x0000ffff) == 0xffff) {
-			if ((u & 0x00ffffff) == 0xffffff) {
+	if((u&0x000000ff) == 0xff){
+		if((u&0x0000ffff) == 0xffff){
+			if((u&0x00ffffff) == 0xffffff){
 				/* we can turn the lights off now. it's time to die */
-#ifdef ERROR_HANDLING
+			#ifdef ERROR_HANDLING	
 				error(PERSISTENT_COUNTER_OVERFLOW);
-#endif
+			#endif
 			}
 			eeprom_busy_wait();
-			eeprom_write_byte(&(((uint8_t*) &(percnt->B08_23))[1]),
-					((u + 1) >> 16) & 0xff);
+			eeprom_write_byte(&(((uint8_t*)&B08_23)[1]),((u+1)>>16)&0xff);
 		}
 		eeprom_busy_wait();
-		eeprom_write_byte(&(((uint8_t*) &(percnt->B08_23))[0]),
-				((u + 1) >> 8) & 0xff);
+		eeprom_write_byte(&(((uint8_t*)&B08_23)[0]),((u+1)>>8)&0xff);
 	}
 	/* set least significant byte (in ringbuffer) */
-	*ring_index = (*ring_index + 1) % RING_SIZE;
+	ring_idx = (ring_idx+1)%RING_SIZE;
 	eeprom_busy_wait();
-	eeprom_write_byte(&(percnt->B0_7[*ring_index]), (u + 1) & 0xff);
+	eeprom_write_byte(&(B0_7[ring_idx]),(u+1)&0xff);
 	eeprom_busy_wait();
-
-	if (u + 1 != percnt_get(percnt, ring_index)) {
-#ifdef ERROR_HANDLING
+	
+	if(u+1 != percnt_get()){
+	#ifdef ERROR_HANDLING	
 		error(PERSISTENT_COUNTER_WRITER_ERROR);
-#endif
+	#endif 
 	}
-
+	
 	sei();
 }
 

src/random/persistentCounter.h

@@ -9,22 +9,15 @@
 #ifndef PERSISTENTCOUNTER_H_
 #define PERSISTENTCOUNTER_H_
 
+
 #include <stdint.h>
-#include "../compat/eeprom.h"
 
 #define PERSISTENT_COUNTER_BITS 24
-#define RING_SIZE 168
 
-typedef struct percnt_s {
-	uint16_t B08_23;
-	uint8_t  B0_7[RING_SIZE];
-} percnt_t;
+void percnt_init(void);
+uint32_t percnt_get(void);
+void percnt_inc(void);
 
-extern uint8_t  g_reset_counter_idx;
-extern percnt_t g_reset_counter EEMEM;
 
-void percnt_init(percnt_t *percnt, uint8_t *ring_index);
-uint32_t percnt_get(percnt_t *percnt, uint8_t *ring_index);
-void percnt_inc(percnt_t *percnt, uint8_t *ring_index);
 
 #endif /*PERSISTENTCOUNTER_H_*/

src/scrolltext/scrolltext3.c

@@ -69,9 +69,14 @@ static void clear_text_pixmap(){
 	memset(text_pixmap, 0, NUM_ROWS * LINEBYTES);
 }
 
-static void update_pixmap(){
-	for(unsigned char p = NUMPLANE; p--;){
-		memcpy(&pixmap[p][0][0], text_pixmap, NUM_ROWS * LINEBYTES);
+void update_pixmap(){
+	unsigned char x, y, z;
+	for(x=NUMPLANE;x--;){
+		for(y=NUM_ROWS;y--;){
+			for(z=LINEBYTES;z--;){
+				pixmap[x][y][z] = (*text_pixmap)[y][z];
+			}
+		}
 	}
 }
 

src/simulator/main.c

@@ -62,7 +62,7 @@ int win;
 void wait(unsigned int ms) {
 	if (waitForFire) {
 		if (fakeport & 0x01) {
-			longjmp(newmode_jmpbuf, 0xFEu);
+			longjmp(newmode_jmpbuf, 43);
 		}
 	}
 

src/simulator/winmain.c

@@ -455,7 +455,7 @@ void wait(int ms)
 	{
 		if (fakeport & 0x01)
 		{
-			longjmp(newmode_jmpbuf, 0xFEu);
+			longjmp(newmode_jmpbuf, 43);
 		}
 	}
 

src/uart/Makefile

@@ -1,16 +0,0 @@
-MAKETOPDIR = ../..
-
-TARGET = libuart.a
-
-SRC_SIM :=
-
-include $(MAKETOPDIR)/defaults.mk
-
-ifeq ($(UART_SUPPORT),y)
-  SRC = uart.c
-  SRC += uart_commands.c
-endif
-
-include $(MAKETOPDIR)/rules.mk
-
-include $(MAKETOPDIR)/depend.mk

src/uart/config.in

@@ -1 +0,0 @@
-# nothing for now

src/uart/uart.c

@@ -1,688 +1,188 @@
-/*************************************************************************
-Title:    Interrupt UART library with receive/transmit circular buffers
-Author:   Peter Fleury <pfleury@gmx.ch>   http://jump.to/fleury
-File:     $Id: uart.c,v 1.12 2014/01/08 21:58:12 peter Exp $
-Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher
-Hardware: any AVR with built-in UART,
-License:  GNU General Public License
+/* USART-Init beim ATmegaXX */
 
-DESCRIPTION:
-    An interrupt is generated when the UART has finished transmitting or
-    receiving a byte. The interrupt handling routines use circular buffers
-    for buffering received and transmitted data.
 
-    The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define
-    the buffer size in bytes. Note that these variables must be a
-    power of 2.
-
-USAGE:
-    Refere to the header file uart.h for a description of the routines.
-    See also example test_uart.c.
-
-NOTES:
-    Based on Atmel Application Note AVR306
-
-LICENSE:
-    Copyright (C) 2006 Peter Fleury
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-*************************************************************************/
 #include <avr/io.h>
 #include <avr/interrupt.h>
-#include <avr/pgmspace.h>
+#include <stdlib.h>
+
+#include "config.h"
 #include "uart.h"
 
-
-/*
- *  constants and macros
- */
-
-/* size of RX/TX buffers */
-#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1)
-#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1)
-
-#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK )
-#error RX buffer size is not a power of 2
-#endif
-#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK )
-#error TX buffer size is not a power of 2
-#endif
-
-#if defined(__AVR_AT90S2313__) \
- || defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \
- || defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \
- || defined(__AVR_ATmega103__)
- /* old AVR classic or ATmega103 with one UART */
- #define AT90_UART
- #define UART0_RECEIVE_INTERRUPT   UART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  UART_UDRE_vect
- #define UART0_STATUS   USR
- #define UART0_CONTROL  UCR
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__)
- /* old AVR classic with one UART */
- #define AT90_UART
- #define UART0_RECEIVE_INTERRUPT   UART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  UART_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif  defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
-  || defined(__AVR_ATmega323__)
-  /* ATmega with one USART */
- #define ATMEGA_USART
- #define UART0_RECEIVE_INTERRUPT   USART_RXC_vect
- #define UART0_TRANSMIT_INTERRUPT  USART_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined (__AVR_ATmega8515__) || defined(__AVR_ATmega8535__)
- #define ATMEGA_USART
- #define UART0_RECEIVE_INTERRUPT   USART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined(__AVR_ATmega163__)
-  /* ATmega163 with one UART */
- #define ATMEGA_UART
- #define UART0_RECEIVE_INTERRUPT   UART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  UART_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined(__AVR_ATmega162__)
- /* ATmega with two USART */
- #define ATMEGA_USART0
- #define ATMEGA_USART1
- #define UART0_RECEIVE_INTERRUPT   USART0_RXC_vect
- #define UART1_RECEIVE_INTERRUPT   USART1_RXC_vect
- #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
- #define UART1_TRANSMIT_INTERRUPT  USART1_UDRE_vect
- #define UART0_STATUS   UCSR0A
- #define UART0_CONTROL  UCSR0B
- #define UART0_DATA     UDR0
- #define UART0_UDRIE    UDRIE0
- #define UART1_STATUS   UCSR1A
- #define UART1_CONTROL  UCSR1B
- #define UART1_DATA     UDR1
- #define UART1_UDRIE    UDRIE1
-#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
- /* ATmega with two USART */
- #define ATMEGA_USART0
- #define ATMEGA_USART1
- #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
- #define UART1_RECEIVE_INTERRUPT   USART1_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
- #define UART1_TRANSMIT_INTERRUPT  USART1_UDRE_vect
- #define UART0_STATUS   UCSR0A
- #define UART0_CONTROL  UCSR0B
- #define UART0_DATA     UDR0
- #define UART0_UDRIE    UDRIE0
- #define UART1_STATUS   UCSR1A
- #define UART1_CONTROL  UCSR1B
- #define UART1_DATA     UDR1
- #define UART1_UDRIE    UDRIE1
-#elif defined(__AVR_ATmega161__)
- /* ATmega with UART */
- #error "AVR ATmega161 currently not supported by this libaray !"
-#elif defined(__AVR_ATmega169__)
- /* ATmega with one USART */
- #define ATMEGA_USART
- #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined(__AVR_ATmega48__) || defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) \
- || defined(__AVR_ATmega3250__) || defined(__AVR_ATmega3290__) ||defined(__AVR_ATmega6450__) || defined(__AVR_ATmega6490__)
- /* ATmega with one USART */
- #define ATMEGA_USART0
- #define UART0_RECEIVE_INTERRUPT   USART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART_UDRE_vect
- #define UART0_STATUS   UCSR0A
- #define UART0_CONTROL  UCSR0B
- #define UART0_DATA     UDR0
- #define UART0_UDRIE    UDRIE0
-#elif defined(__AVR_ATtiny2313__)
- #define ATMEGA_USART
- #define UART0_RECEIVE_INTERRUPT   USART_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART_UDRE_vect
- #define UART0_STATUS   UCSRA
- #define UART0_CONTROL  UCSRB
- #define UART0_DATA     UDR
- #define UART0_UDRIE    UDRIE
-#elif defined(__AVR_ATmega329__) || \
-      defined(__AVR_ATmega649__) || \
-      defined(__AVR_ATmega325__) || \
-      defined(__AVR_ATmega645__)
-  /* ATmega with one USART */
-  #define ATMEGA_USART0
-  #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
-  #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
-  #define UART0_STATUS   UCSR0A
-  #define UART0_CONTROL  UCSR0B
-  #define UART0_DATA     UDR0
-  #define UART0_UDRIE    UDRIE0
-#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__)  || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__)
-/* ATmega with two USART */
-  #define ATMEGA_USART0
-  #define ATMEGA_USART1
-  #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
-  #define UART1_RECEIVE_INTERRUPT   USART1_RX_vect
-  #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
-  #define UART1_TRANSMIT_INTERRUPT  USART1_UDRE_vect
-  #define UART0_STATUS   UCSR0A
-  #define UART0_CONTROL  UCSR0B
-  #define UART0_DATA     UDR0
-  #define UART0_UDRIE    UDRIE0
-  #define UART1_STATUS   UCSR1A
-  #define UART1_CONTROL  UCSR1B
-  #define UART1_DATA     UDR1
-  #define UART1_UDRIE    UDRIE1
-#elif defined(__AVR_ATmega644__)
- /* ATmega with one USART */
- #define ATMEGA_USART0
- #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
- #define UART0_STATUS   UCSR0A
- #define UART0_CONTROL  UCSR0B
- #define UART0_DATA     UDR0
- #define UART0_UDRIE    UDRIE0
-#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__)
- /* ATmega with two USART */
- #define ATMEGA_USART0
- #define ATMEGA_USART1
- #define UART0_RECEIVE_INTERRUPT   USART0_RX_vect
- #define UART1_RECEIVE_INTERRUPT   USART1_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART0_UDRE_vect
- #define UART1_TRANSMIT_INTERRUPT  USART1_UDRE_vect
- #define UART0_STATUS   UCSR0A
- #define UART0_CONTROL  UCSR0B
- #define UART0_DATA     UDR0
- #define UART0_UDRIE    UDRIE0
- #define UART1_STATUS   UCSR1A
- #define UART1_CONTROL  UCSR1B
- #define UART1_DATA     UDR1
- #define UART1_UDRIE    UDRIE1
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)
- /* AT90USBxx with one USART */
- #define AT90USB_USART
- #define UART0_RECEIVE_INTERRUPT   USART1_RX_vect
- #define UART0_TRANSMIT_INTERRUPT  USART1_UDRE_vect
- #define UART0_STATUS   UCSR1A
- #define UART0_CONTROL  UCSR1B
- #define UART0_DATA     UDR1
- #define UART0_UDRIE    UDRIE1
-#elif defined __AVR
- #error "no UART definition for MCU available"
+#ifdef ATMEGA128
+#define UCSRB UCSR0B
+#define UCSRC UCSR0C
+#define UDR UDR0
+#define UBRRH UBRR0H
+#define UBRRL UBRR0L
+#define URSEL UMSEL
 #endif
 
 
-/*
- *  module global variables
- */
-static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE];
-static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE];
-static volatile unsigned char UART_TxHead;
-static volatile unsigned char UART_TxTail;
-static volatile unsigned char UART_RxHead;
-static volatile unsigned char UART_RxTail;
-static volatile unsigned char UART_LastRxError;
+#define UART_BAUD_CALC(UART_BAUD_RATE,F_OSC) ((F_OSC)/((UART_BAUD_RATE)*16L))
 
-#if defined( ATMEGA_USART1 ) && defined (USE_UART1)
-static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE];
-static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE];
-static volatile unsigned char UART1_TxHead;
-static volatile unsigned char UART1_TxTail;
-static volatile unsigned char UART1_RxHead;
-static volatile unsigned char UART1_RxTail;
-static volatile unsigned char UART1_LastRxError;
+
+#ifdef UART_INTERRUPT
+volatile static char rxbuf[UART_RXBUFSIZE];
+volatile static char txbuf[UART_TXBUFSIZE];
+volatile static char *volatile rxhead, *volatile rxtail;
+volatile static char *volatile txhead, *volatile txtail;
+
+
+ISR(USART_UDRE_vect) {
+#ifdef UART_LEDS	
+	PORTC ^= 0x01;
 #endif
+	
+	if ( txhead == txtail ) {
+		UCSRB &= ~(1 << UDRIE);		/* disable data register empty IRQ */
+	} else {
+		UDR = *txtail;			/* schreibt das Zeichen x auf die Schnittstelle */
+		if (++txtail == (txbuf + UART_TXBUFSIZE)) txtail = txbuf;
+	}
+}
+
+ISR(USART_RXC_vect) {
+	int diff; 
+
+#ifdef UART_LEDS
+	PORTC ^= 0x02;
+#endif
+	
+	/* buffer full? */
+	diff = rxhead - rxtail;
+	if ( diff < 0 ) diff += UART_RXBUFSIZE;
+	if (diff < UART_RXBUFSIZE -1) {
+		// buffer NOT full
+		*rxhead = UDR;
+		if (++rxhead == (rxbuf + UART_RXBUFSIZE)) rxhead = rxbuf;
+	} else {
+		UDR;				//reads the buffer to clear the interrupt condition
+	}
+}
+
+#endif // UART_INTERRUPT
 
 
+void uart_init() {
+	PORTD |= 0x01;				//Pullup an RXD an
 
-ISR (UART0_RECEIVE_INTERRUPT)
-/*************************************************************************
-Function: UART Receive Complete interrupt
-Purpose:  called when the UART has received a character
-**************************************************************************/
+	UCSRA = 0;
+	UCSRB |= (1<<TXEN);			//UART TX einschalten
+	UCSRC |= (1<<URSEL)|(3<<UCSZ0);		//Asynchron 8N1
+
+	UCSRB |= ( 1 << RXEN );			//Uart RX einschalten
+
+//	UBRRH=(uint8_t)(UART_BAUD_CALC(UART_BAUD_RATE,F_CPU)>>8);
+//	UBRRL=(uint8_t)(UART_BAUD_CALC(UART_BAUD_RATE,F_CPU));
+
+	UBRRL = 8;
+
+#ifdef UART_INTERRUPT
+	// init buffers
+	rxhead = rxtail = rxbuf;
+	txhead = txtail = txbuf;
+
+	// activate rx IRQ
+	UCSRB |= (1 << RXCIE);
+#endif // UART_INTERRUPT
+}
+
+#ifdef UART_INTERRUPT
+void uart_putc(char c) {
+	volatile int diff;
+
+	/* buffer full? */
+	do {
+		diff = txhead - txtail;
+		if ( diff < 0 ) diff += UART_TXBUFSIZE;
+	} while ( diff >= UART_TXBUFSIZE -1 );
+
+	cli();
+	*txhead = c;
+ 	if (++txhead == (txbuf + UART_TXBUFSIZE)) txhead = txbuf;
+
+	UCSRB |= (1 << UDRIE);		/* enable data register empty IRQ */
+	sei();
+}
+#else  // WITHOUT INTERRUPT
+void uart_putc(char c) {
+	while (!(UCSRA & (1<<UDRE))); /* warten bis Senden moeglich                   */
+	UDR = c;                      /* schreibt das Zeichen x auf die Schnittstelle */
+}
+#endif // UART_INTERRUPT
+
+
+void uart_putstr(char *str) {
+	while(*str) {
+		uart_putc(*str++);
+	}
+}
+
+void uart_putstr_P(PGM_P str) {
+	char tmp;
+	while((tmp = pgm_read_byte(str))) {
+		uart_putc(tmp);
+		str++;
+	}
+}
+
+void uart_hexdump(char *buf, int len)
 {
-    unsigned char tmphead;
-    unsigned char data;
-    unsigned char usr;
-    unsigned char lastRxError;
+	unsigned char x=0;
+	char sbuf[3];
 
-
-    /* read UART status register and UART data register */
-    usr  = UART0_STATUS;
-    data = UART0_DATA;
-
-    /* */
-#if defined( AT90_UART )
-    lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
-#elif defined( ATMEGA_USART )
-    lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
-#elif defined( ATMEGA_USART0 )
-    lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) );
-#elif defined ( ATMEGA_UART )
-    lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
-#elif defined( AT90USB_USART )
-    lastRxError = (usr & (_BV(FE1)|_BV(DOR1)) );
-#endif
-
-    /* calculate buffer index */
-    tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK;
-
-    if ( tmphead == UART_RxTail ) {
-        /* error: receive buffer overflow */
-        lastRxError = UART_BUFFER_OVERFLOW >> 8;
-    }else{
-        /* store new index */
-        UART_RxHead = tmphead;
-        /* store received data in buffer */
-        UART_RxBuf[tmphead] = data;
-    }
-    UART_LastRxError |= lastRxError;
+	while(len--){
+		itoa(*buf++, sbuf, 16);
+		if (sbuf[1] == 0) uart_putc(' ');
+		uart_putstr(sbuf);
+		uart_putc(' ');
+		if(++x == 16) {
+			uart_putstr_P(PSTR("\r\n"));
+			x = 0;
+		}
+	}
 }
 
 
-ISR (UART0_TRANSMIT_INTERRUPT)
-/*************************************************************************
-Function: UART Data Register Empty interrupt
-Purpose:  called when the UART is ready to transmit the next byte
-**************************************************************************/
+#ifdef UART_INTERRUPT
+char uart_getc()
 {
-    unsigned char tmptail;
+	char val;
 
+	while(rxhead==rxtail) ;
 
-    if ( UART_TxHead != UART_TxTail) {
-        /* calculate and store new buffer index */
-        tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK;
-        UART_TxTail = tmptail;
-        /* get one byte from buffer and write it to UART */
-        UART0_DATA = UART_TxBuf[tmptail];  /* start transmission */
-    }else{
-        /* tx buffer empty, disable UDRE interrupt */
-        UART0_CONTROL &= ~_BV(UART0_UDRIE);
-    }
+	val = *rxtail;
+ 	if (++rxtail == (rxbuf + UART_RXBUFSIZE)) rxtail = rxbuf;
+
+	return val;
 }
-
-
-/*************************************************************************
-Function: uart_init()
-Purpose:  initialize UART and set baudrate
-Input:    baudrate using macro UART_BAUD_SELECT()
-Returns:  none
-**************************************************************************/
-void uart_init(unsigned int baudrate)
+#else  // WITHOUT INTERRUPT
+char uart_getc()
 {
-    UART_TxHead = 0;
-    UART_TxTail = 0;
-    UART_RxHead = 0;
-    UART_RxTail = 0;
-
-#if defined( AT90_UART )
-    /* set baud rate */
-    UBRR = (unsigned char)baudrate;
-
-    /* enable UART receiver and transmmitter and receive complete interrupt */
-    UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN);
-
-#elif defined (ATMEGA_USART)
-    /* Set baud rate */
-    if ( baudrate & 0x8000 )
-    {
-    	 UART0_STATUS = (1<<U2X);  //Enable 2x speed
-    	 baudrate &= ~0x8000;
-    }
-    UBRRH = (unsigned char)(baudrate>>8);
-    UBRRL = (unsigned char) baudrate;
-
-    /* Enable USART receiver and transmitter and receive complete interrupt */
-    UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
-
-    /* Set frame format: asynchronous, 8data, no parity, 1stop bit */
-    #ifdef URSEL
-    UCSRC = (1<<URSEL)|(3<<UCSZ0);
-    #else
-    UCSRC = (3<<UCSZ0);
-    #endif
-
-#elif defined (ATMEGA_USART0 )
-    /* Set baud rate */
-    if ( baudrate & 0x8000 )
-    {
-   		UART0_STATUS = (1<<U2X0);  //Enable 2x speed
-   		baudrate &= ~0x8000;
-   	}
-    UBRR0H = (unsigned char)(baudrate>>8);
-    UBRR0L = (unsigned char) baudrate;
-
-    /* Enable USART receiver and transmitter and receive complete interrupt */
-    UART0_CONTROL = _BV(RXCIE0)|(1<<RXEN0)|(1<<TXEN0);
-
-    /* Set frame format: asynchronous, 8data, no parity, 1stop bit */
-    #ifdef URSEL0
-    UCSR0C = (1<<URSEL0)|(3<<UCSZ00);
-    #else
-    UCSR0C = (3<<UCSZ00);
-    #endif
-
-#elif defined ( ATMEGA_UART )
-    /* set baud rate */
-    if ( baudrate & 0x8000 )
-    {
-    	UART0_STATUS = (1<<U2X);  //Enable 2x speed
-    	baudrate &= ~0x8000;
-    }
-    UBRRHI = (unsigned char)(baudrate>>8);
-    UBRR   = (unsigned char) baudrate;
-
-    /* Enable UART receiver and transmitter and receive complete interrupt */
-    UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
-
-#elif defined ( AT90USB_USART )
-   /* set baud rate */
-    if ( baudrate & 0x8000 )
-    {
-    	UART0_STATUS = (1<<U2X1 );  //Enable 2x speed
-    	baudrate &= ~0x8000;
-    }
-    UBRR1H = (unsigned char)(baudrate>>8);
-    UBRR1L = (unsigned char) baudrate;
-
-    /* Enable UART receiver and transmitter and receive complete interrupt */
-    UART0_CONTROL = _BV(RXCIE1)|(1<<RXEN1)|(1<<TXEN1);
-
-    /* Set frame format: asynchronous, 8data, no parity, 1stop bit */
-    UCSR1C = (1<<UCSZ11)|(1<<UCSZ10);
-#endif
-
-}/* uart_init */
-
-
-/*************************************************************************
-Function: uart_getc()
-Purpose:  return byte from ringbuffer
-Returns:  lower byte:  received byte from ringbuffer
-          higher byte: last receive error
-**************************************************************************/
-unsigned int uart_getc(void)
-{
-    unsigned char tmptail;
-    unsigned char data;
-
-
-    if ( UART_RxHead == UART_RxTail ) {
-        return UART_NO_DATA;   /* no data available */
-    }
-
-    /* calculate /store buffer index */
-    tmptail = (UART_RxTail + 1) & UART_RX_BUFFER_MASK;
-    UART_RxTail = tmptail;
-
-    /* get data from receive buffer */
-    data = UART_RxBuf[tmptail];
-
-    data = (UART_LastRxError << 8) + data;
-    UART_LastRxError = 0;
-    return data;
-
-}/* uart_getc */
-
-
-/*************************************************************************
-Function: uart_putc()
-Purpose:  write byte to ringbuffer for transmitting via UART
-Input:    byte to be transmitted
-Returns:  none
-**************************************************************************/
-void uart_putc(unsigned char data)
-{
-    unsigned char tmphead;
-
-
-    tmphead  = (UART_TxHead + 1) & UART_TX_BUFFER_MASK;
-
-    while ( tmphead == UART_TxTail ){
-        ;/* wait for free space in buffer */
-    }
-
-    UART_TxBuf[tmphead] = data;
-    UART_TxHead = tmphead;
-
-    /* enable UDRE interrupt */
-    UART0_CONTROL    |= _BV(UART0_UDRIE);
-
-}/* uart_putc */
-
-
-/*************************************************************************
-Function: uart_puts()
-Purpose:  transmit string to UART
-Input:    string to be transmitted
-Returns:  none
-**************************************************************************/
-void uart_puts(const char *s )
-{
-    while (*s)
-      uart_putc(*s++);
-
-}/* uart_puts */
-
-
-/*************************************************************************
-Function: uart_puts_p()
-Purpose:  transmit string from program memory to UART
-Input:    program memory string to be transmitted
-Returns:  none
-**************************************************************************/
-void uart_puts_p(const char *progmem_s )
-{
-    register char c;
-
-    while ( (c = pgm_read_byte(progmem_s++)) )
-      uart_putc(c);
-
-}/* uart_puts_p */
-
-
-/*
- * these functions are only for ATmegas with two USART
- */
-#if defined( ATMEGA_USART1 ) && defined (USE_UART1)
-
-ISR(UART1_RECEIVE_INTERRUPT)
-/*************************************************************************
-Function: UART1 Receive Complete interrupt
-Purpose:  called when the UART1 has received a character
-**************************************************************************/
-{
-    unsigned char tmphead;
-    unsigned char data;
-    unsigned char usr;
-    unsigned char lastRxError;
-
-
-    /* read UART status register and UART data register */
-    usr  = UART1_STATUS;
-    data = UART1_DATA;
-
-    /* */
-    lastRxError = (usr & (_BV(FE1)|_BV(DOR1)) );
-
-    /* calculate buffer index */
-    tmphead = ( UART1_RxHead + 1) & UART_RX_BUFFER_MASK;
-
-    if ( tmphead == UART1_RxTail ) {
-        /* error: receive buffer overflow */
-        lastRxError = UART_BUFFER_OVERFLOW >> 8;
-    }else{
-        /* store new index */
-        UART1_RxHead = tmphead;
-        /* store received data in buffer */
-        UART1_RxBuf[tmphead] = data;
-    }
-    UART1_LastRxError |= lastRxError;
+	while (!(UCSRA & (1<<RXC)));	// warten bis Zeichen verfuegbar
+	return UDR;			// Zeichen aus UDR zurueckgeben
 }
+#endif // UART_INTERRUPT
 
-
-ISR(UART1_TRANSMIT_INTERRUPT)
-/*************************************************************************
-Function: UART1 Data Register Empty interrupt
-Purpose:  called when the UART1 is ready to transmit the next byte
-**************************************************************************/
+// returns 1 on success
+#ifdef UART_INTERRUPT
+char uart_getc_nb(char *c)
 {
-    unsigned char tmptail;
+	if (rxhead==rxtail) return 0;
 
+	*c = *rxtail;
+ 	if (++rxtail == (rxbuf + UART_RXBUFSIZE)) rxtail = rxbuf;
 
-    if ( UART1_TxHead != UART1_TxTail) {
-        /* calculate and store new buffer index */
-        tmptail = (UART1_TxTail + 1) & UART_TX_BUFFER_MASK;
-        UART1_TxTail = tmptail;
-        /* get one byte from buffer and write it to UART */
-        UART1_DATA = UART1_TxBuf[tmptail];  /* start transmission */
-    }else{
-        /* tx buffer empty, disable UDRE interrupt */
-        UART1_CONTROL &= ~_BV(UART1_UDRIE);
-    }
+	return 1;
 }
-
-
-/*************************************************************************
-Function: uart1_init()
-Purpose:  initialize UART1 and set baudrate
-Input:    baudrate using macro UART_BAUD_SELECT()
-Returns:  none
-**************************************************************************/
-void uart1_init(unsigned int baudrate)
+#else  // WITHOUT INTERRUPT
+char uart_getc_nb(char *c)
 {
-    UART1_TxHead = 0;
-    UART1_TxTail = 0;
-    UART1_RxHead = 0;
-    UART1_RxTail = 0;
+	if (UCSRA & (1<<RXC)) {		// Zeichen verfuegbar
+		*c = UDR;
+		return 1;
+	}
 
-
-    /* Set baud rate */
-    if ( baudrate & 0x8000 )
-    {
-    	UART1_STATUS = (1<<U2X1);  //Enable 2x speed
-      baudrate &= ~0x8000;
-    }
-    UBRR1H = (unsigned char)(baudrate>>8);
-    UBRR1L = (unsigned char) baudrate;
-
-    /* Enable USART receiver and transmitter and receive complete interrupt */
-    UART1_CONTROL = _BV(RXCIE1)|(1<<RXEN1)|(1<<TXEN1);
-
-    /* Set frame format: asynchronous, 8data, no parity, 1stop bit */
-    #ifdef URSEL1
-    UCSR1C = (1<<URSEL1)|(3<<UCSZ10);
-    #else
-    UCSR1C = (3<<UCSZ10);
-    #endif
-}/* uart_init */
-
-
-/*************************************************************************
-Function: uart1_getc()
-Purpose:  return byte from ringbuffer
-Returns:  lower byte:  received byte from ringbuffer
-          higher byte: last receive error
-**************************************************************************/
-unsigned int uart1_getc(void)
-{
-    unsigned char tmptail;
-    unsigned char data;
-
-
-    if ( UART1_RxHead == UART1_RxTail ) {
-        return UART_NO_DATA;   /* no data available */
-    }
-
-    /* calculate /store buffer index */
-    tmptail = (UART1_RxTail + 1) & UART_RX_BUFFER_MASK;
-    UART1_RxTail = tmptail;
-
-    /* get data from receive buffer */
-    data = UART1_RxBuf[tmptail];
-
-    data = (UART1_LastRxError << 8) + data;
-    UART1_LastRxError = 0;
-    return data;
-
-}/* uart1_getc */
-
-
-/*************************************************************************
-Function: uart1_putc()
-Purpose:  write byte to ringbuffer for transmitting via UART
-Input:    byte to be transmitted
-Returns:  none
-**************************************************************************/
-void uart1_putc(unsigned char data)
-{
-    unsigned char tmphead;
-
-
-    tmphead  = (UART1_TxHead + 1) & UART_TX_BUFFER_MASK;
-
-    while ( tmphead == UART1_TxTail ){
-        ;/* wait for free space in buffer */
-    }
-
-    UART1_TxBuf[tmphead] = data;
-    UART1_TxHead = tmphead;
-
-    /* enable UDRE interrupt */
-    UART1_CONTROL    |= _BV(UART1_UDRIE);
-
-}/* uart1_putc */
-
-
-/*************************************************************************
-Function: uart1_puts()
-Purpose:  transmit string to UART1
-Input:    string to be transmitted
-Returns:  none
-**************************************************************************/
-void uart1_puts(const char *s )
-{
-    while (*s)
-      uart1_putc(*s++);
-
-}/* uart1_puts */
-
-
-/*************************************************************************
-Function: uart1_puts_p()
-Purpose:  transmit string from program memory to UART1
-Input:    program memory string to be transmitted
-Returns:  none
-**************************************************************************/
-void uart1_puts_p(const char *progmem_s )
-{
-    register char c;
-
-    while ( (c = pgm_read_byte(progmem_s++)) )
-      uart1_putc(c);
-
-}/* uart1_puts_p */
-
-#endif
+	return 0;
+}
+#endif // UART_INTERRUPT

src/uart/uart.h

@@ -1,223 +1,35 @@
 #ifndef UART_H
 #define UART_H
-/************************************************************************
-Title:    Interrupt UART library with receive/transmit circular buffers
-Author:   Peter Fleury <pfleury@gmx.ch>   http://jump.to/fleury
-File:     $Id: uart.h,v 1.12 2012/11/19 19:52:27 peter Exp $
-Software: AVR-GCC 4.1, AVR Libc 1.4
-Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz
-License:  GNU General Public License
-Usage:    see Doxygen manual
-
-LICENSE:
-    Copyright (C) 2006 Peter Fleury
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-************************************************************************/
 
 /**
- *  @defgroup pfleury_uart UART Library
- *  @code #include <uart.h> @endcode
+ * UART Library
  *
- *  @brief Interrupt UART library using the built-in UART with transmit and
- *         receive circular buffers.
+ * #define F_CPU 16000000         // Oszillator-Frequenz in Hz
+ * #define UART_INTERRUPT 1
+ * #define UART_BAUD_RATE 19200
+ * #define UART_RXBUFSIZE 16
+ * #define UART_TXBUFSIZE 16
+ * #define UART_LINE_BUFFER_SIZE 40
+ * #define UART_LEDS             // LED1 and LED2 toggle on tx and rx interrupt
  *
- *  This library can be used to transmit and receive data through the built in
- *  UART.
- *
- *  An interrupt is generated when the UART has finished transmitting or
- *  receiving a byte. The interrupt handling routines use circular buffers
- *  for buffering received and transmitted data.
- *
- *  The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define the size of
- *  the circular buffers in bytes. Note that these constants must be a power of
- *  2. You may need to adapt this constants to your target and your application
- *  by adding CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your
- *  Makefile.
- *
- *  @note Based on Atmel Application Note AVR306
- *  @author Peter Fleury pfleury@gmx.ch  http://jump.to/fleury
  */
 
-/**@{*/
+#include <inttypes.h>
+#include <avr/pgmspace.h>
 
-#include "../config.h"
+void uart_init();
+
+void uart_putc(char c);
+void uart_putstr(char * str);
+void uart_putstr_P(PGM_P str);
+void uart_hexdump(char *buf, int len);
+
+char uart_getc();
+char uart_getc_nb(char *c);		// returns 1 on success
+
+//get one Cariage return terminated line
+//echo charakters back on Uart
+//returns buffer with zero terminated line on success, 0 pointer otherwise
+char * uart_getline_nb();
 
-#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
-#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
 #endif
-
-
-/*
- * constants and macros
- */
-
-/** @brief  UART Baudrate Expression
- *  @param  xtalcpu  system clock in Mhz, e.g. 4000000UL for 4Mhz
- *  @param  baudrate baudrate in bps, e.g. 1200, 2400, 9600
- */
-#define UART_BAUD_SELECT(baudRate,xtalCpu) \
-	(((xtalCpu) + 8UL * (baudRate)) / (16UL * (baudRate)) -1UL)
-
-/** @brief  UART Baudrate Expression for ATmega double speed mode
- *  @param  xtalcpu  system clock in Mhz, e.g. 4000000UL for 4Mhz
- *  @param  baudrate baudrate in bps, e.g. 1200, 2400, 9600
- */
-#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) \
-	(((((xtalCpu) + 4UL * (baudRate)) / (8UL * (baudRate)) -1UL)) | 0x8000)
-
-
-/** Size of the circular receive buffer, must be power of 2 */
-#ifndef UART_RX_BUFFER_SIZE
-#define UART_RX_BUFFER_SIZE 32
-#endif
-
-/** Size of the circular transmit buffer, must be power of 2 */
-#ifndef UART_TX_BUFFER_SIZE
-#define UART_TX_BUFFER_SIZE 32
-#endif
-
-/* test if the size of the circular buffers fits into SRAM */
-#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) ) && defined __AVR
-#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM"
-#endif
-
-/*
-** high byte error return code of uart_getc()
-*/
-#define UART_FRAME_ERROR      0x1000           /* Framing Error by UART       */
-#define UART_OVERRUN_ERROR    0x0800           /* Overrun condition by UART   */
-#define UART_PARITY_ERROR     0x0400           /* Parity Error by UART        */
-#define UART_BUFFER_OVERFLOW  0x0200           /* receive ringbuffer overflow */
-#define UART_NO_DATA          0x0100           /* no receive data available   */
-
-
-/*
-** function prototypes
-*/
-
-/**
-   @brief   Initialize UART and set baudrate
-   @param   baudrate Specify baudrate using macro UART_BAUD_SELECT()
-   @return  none
-*/
-extern void uart_init(unsigned int baudrate);
-
-
-/**
- *  @brief   Get received byte from ringbuffer
- *
- * Returns in the lower byte the received character and in the
- * higher byte the last receive error.
- * UART_NO_DATA is returned when no data is available.
- *
- *  @param   void
- *  @return  lower byte:  received byte from ringbuffer
- *  @return  higher byte: last receive status
- *           - \b 0 successfully received data from UART
- *           - \b UART_NO_DATA
- *             <br>no receive data available
- *           - \b UART_BUFFER_OVERFLOW
- *             <br>Receive ringbuffer overflow.
- *             We are not reading the receive buffer fast enough,
- *             one or more received character have been dropped
- *           - \b UART_OVERRUN_ERROR
- *             <br>Overrun condition by UART.
- *             A character already present in the UART UDR register was not read
- *             by the interrupt handler before the next character arrived,
- *             one or more received characters have been dropped.
- *           - \b UART_FRAME_ERROR
- *             <br>Framing Error by UART
- */
-extern unsigned int uart_getc(void);
-
-
-/**
- *  @brief   Put byte to ringbuffer for transmitting via UART
- *  @param   data byte to be transmitted
- *  @return  none
- */
-extern void uart_putc(unsigned char data);
-
-
-/**
- *  @brief   Put string to ringbuffer for transmitting via UART
- *
- *  The string is buffered by the uart library in a circular buffer
- *  and one character at a time is transmitted to the UART using interrupts.
- *  Blocks if it can not write the whole string into the circular buffer.
- *
- *  @param   s string to be transmitted
- *  @return  none
- */
-extern void uart_puts(const char *s );
-
-
-/**
- * @brief    Put string from program memory to ringbuffer for transmitting via
- *           UART.
- *
- * The string is buffered by the uart library in a circular buffer
- * and one character at a time is transmitted to the UART using interrupts.
- * Blocks if it can not write the whole string into the circular buffer.
- *
- * @param    s program memory string to be transmitted
- * @return   none
- * @see      uart_puts_P
- */
-extern void uart_puts_p(const char *s );
-
-/**
- * @brief    Macro to automatically put a string constant into program memory
- */
-#define uart_puts_P(__s)       uart_puts_p(PSTR(__s))
-
-
-#if defined USE_UART1 || defined DOXYGEN
-
-/** @brief  Initialize USART1 (only available on selected ATmegas)
- *  @see    uart_init
- */
-extern void uart1_init(unsigned int baudrate);
-
-/** @brief  Get received byte of USART1 from ringbuffer (only available on
- *          selected ATmega)
- *  @see    uart_getc
- */
-extern unsigned int uart1_getc(void);
-
-/** @brief  Put byte to ringbuffer for transmitting via USART1 (only available
- *          on selected ATmega)
- *  @see    uart_putc
- */
-extern void uart1_putc(unsigned char data);
-
-/** @brief  Put string to ringbuffer for transmitting via USART1 (only available
- *          on selected ATmega)
- *  @see    uart_puts
- */
-extern void uart1_puts(const char *s );
-
-/** @brief  Put string from program memory to ringbuffer for transmitting via
- *          USART1 (only available on selected ATmega)
- *  @see    uart_puts_p
- */
-extern void uart1_puts_p(const char *s );
-
-/** @brief  Macro to automatically put a string constant into program memory */
-#define uart1_puts_P(__s) uart1_puts_p(PSTR(__s))
-
-/**@}*/
-
-#endif // defined USE_UART1 || defined DOXYGEN
-
-#endif // UART_H

src/uart/uart_commands.c

@@ -1,503 +0,0 @@
-#include <stdint.h>
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdbool.h>
-#include <setjmp.h>
-#include <limits.h>
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
-#include <avr/eeprom.h>
-#include "../config.h"
-#include "../borg_hw/borg_hw.h"
-#ifdef JOYSTICK_SUPPORT
-	#include "../joystick/joystick.h"
-	extern unsigned char waitForFire;
-#endif
-#include "../scrolltext/scrolltext.h"
-#include "../animations/program.h"
-#include "uart.h"
-#include "uart_commands.h"
-
-#ifndef USE_UART1
-#	define UART_PUTS(STR) uart_puts(STR)
-#	define UART_PUTS_P(STR) uart_puts_p(STR)
-#	define UART_GETC uart_getc
-#	define UART_PUTC uart_putc
-#else
-#	define UART_PUTS(STR) uart1_puts(STR)
-#	define UART_PUTS_P(STR) uart1_puts_p(STR)
-#	define UART_GETC uart1_getc
-#	define UART_PUTC uart1_putc
-#endif
-
-#define UART_BUFFER_SIZE (SCROLLTEXT_BUFFER_SIZE + 8)
-char g_rx_buffer[UART_BUFFER_SIZE];
-uint8_t g_rx_index;
-
-extern jmp_buf newmode_jmpbuf;
-extern volatile unsigned char mode;
-extern volatile unsigned char reverseMode;
-
-#define CR "\r\n"
-
-#if (!(defined(eeprom_update_block) && \
-	((E2PAGESIZE == 2) || (E2PAGESIZE == 4) || (E2PAGESIZE == 8)))) || \
-	!(defined(ANIMATION_TESTS))
-char const UART_STR_NOTIMPL[] PROGMEM = "Not implemented."CR;
-#endif
-
-char const UART_STR_CLEARLINE[]  PROGMEM = "\r\033[J";
-char const UART_STR_BACKSPACE[]  PROGMEM = "\b \b";
-char const UART_STR_PROMPT[]     PROGMEM = "> ";
-char const UART_STR_MODE[]       PROGMEM = "%d"CR;
-char const UART_STR_MODE_ERR[]   PROGMEM = "Range is between 0 and 255."CR;
-char const UART_STR_GAMEMO_ERR[] PROGMEM = "No mode change during games."CR;
-char const UART_STR_GAMETX_ERR[] PROGMEM = "No text messages during games."CR;
-char const UART_STR_UART_ERR[]   PROGMEM = "Transmission error."CR;
-char const UART_STR_UNKNOWN[]    PROGMEM = "Unknown command or syntax error."CR;
-char const UART_STR_TOOLONG[]    PROGMEM = CR"Command is too long."CR;
-char const UART_STR_HELP[]       PROGMEM = "Allowed commands: erase help mode "
-                                           "msg next prev reset scroll test"CR;
-
-char const UART_CMD_ERASE[]      PROGMEM = "erase";
-char const UART_CMD_HELP[]       PROGMEM = "help";
-char const UART_CMD_MODE[]       PROGMEM = "mode";
-char const UART_CMD_MSG[]        PROGMEM = "msg ";
-char const UART_CMD_NEXT[]       PROGMEM = "next";
-char const UART_CMD_PREV[]       PROGMEM = "prev";
-char const UART_CMD_RESET[]      PROGMEM = "reset";
-char const UART_CMD_SCROLL[]     PROGMEM = "scroll ";
-char const UART_CMD_TEST[]       PROGMEM = "test";
-
-#ifdef ANIMATION_TESTS
-char const UART_STR_TEST_EXIT[]  PROGMEM = "Press ENTER to exit test."CR;
-char const UART_STR_TEST_ERR[]   PROGMEM = "Range is between 0 and %d."CR;
-char const UART_STR_GAMETS_ERR[] PROGMEM = "No display tests during games."CR;
-char const UART_STR_TEST_UP[]    PROGMEM = "UP ";
-char const UART_STR_TEST_DOWN[]  PROGMEM = "DOWN ";
-char const UART_STR_TEST_LEFT[]  PROGMEM = "LEFT ";
-char const UART_STR_TEST_RIGHT[] PROGMEM = "RIGHT ";
-char const UART_STR_TEST_FIRE[]  PROGMEM = "FIRE";
-
-enum uartcmd_joytest_e {
-	UARTCMD_JOY_UP    = 0x01,
-	UARTCMD_JOY_DOWN  = 0x02,
-	UARTCMD_JOY_LEFT  = 0x04,
-	UARTCMD_JOY_RIGHT = 0x08,
-	UARTCMD_JOY_FIRE  = 0x10
-};
-
-#	ifdef NDEBUG
-	typedef uint8_t uartcmd_joytest_t;
-#	else
-	typedef enum uartcmd_joytest_e uartcmd_joytest_t;
-#	endif
-#endif
-
-
-bool g_uartcmd_permit_processing = 1;
-
-
-/**
- * Checks if command processing is allowed.
- */
-static bool uartcmd_processing_allowed(void) {
-	bool result;
-	cli();
-	result = g_uartcmd_permit_processing;
-	sei();
-	return result;
-}
-
-
-/**
- * Clears the command string buffer.
- */
-static void uartcmd_clear_buffer(void) {
-	char *p = &g_rx_buffer[0];
-	for (uint8_t i = UART_BUFFER_SIZE; i--;) {
-		*p++ = 0;
-	}
-	g_rx_index = 0;
-}
-
-
-/**
- * Erases the complete EEPROM to reset counters and high score tables.
- */
-static void uartcmd_erase_eeprom(void) {
-#if defined(eeprom_update_block) && \
-	((E2PAGESIZE == 2) || (E2PAGESIZE == 4) || (E2PAGESIZE == 8))
-	uint8_t const eeclear[] =
-#	if E2PAGESIZE == 8
-		{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
-#	elif E2PAGESIZE == 4
-		{0xFF, 0xFF, 0xFF, 0xFF};
-#	elif E2PAGESIZE == 2
-		{0xFF, 0xFF};
-#	endif
-	for (void *ee = 0; ee < (void *)E2END; ee += E2PAGESIZE) {
-		eeprom_busy_wait();
-		eeprom_update_block(eeclear, ee, E2PAGESIZE);
-	}
-#else
-	UART_PUTS_P(UART_STR_NOTIMPL);
-#endif
-}
-
-
-/**
- * Displays a simple message without the need to prefix a scrolltext command.
- */
-static void uartcmd_simple_message(void) {
-	if (uartcmd_processing_allowed()) {
-		uartcmd_forbid();
-#ifdef JOYSTICK_SUPPORT
-		if (waitForFire) {
-			waitForFire = 0;
-#endif
-			g_rx_buffer[1] = '<';
-			g_rx_buffer[2] = '/';
-			g_rx_buffer[3] = '#';
-			// text must not be longer than the scroll text buffer
-			g_rx_buffer[1 + SCROLLTEXT_BUFFER_SIZE - 1] = 0;
-			scrolltext(&g_rx_buffer[1]);
-
-#ifdef JOYSTICK_SUPPORT
-			waitForFire = 1;
-		} else {
-			UART_PUTS_P(UART_STR_GAMETX_ERR);
-		}
-#endif
-		uartcmd_permit();
-	}
-}
-
-
-/**
- * Displays a message which may use the complete range of scrolltext commands.
- */
-static void uartcmd_scroll_message(void) {
-	if (uartcmd_processing_allowed()) {
-		uartcmd_forbid();
-#ifdef JOYSTICK_SUPPORT
-		if (waitForFire) {
-			waitForFire = 0;
-#endif
-			// text must not be longer than the scroll text buffer
-			g_rx_buffer[7 + SCROLLTEXT_BUFFER_SIZE - 1] = 0;
-			scrolltext(&g_rx_buffer[7]);
-#ifdef JOYSTICK_SUPPORT
-			waitForFire = 1;
-		} else {
-			UART_PUTS_P(UART_STR_GAMETX_ERR);
-		}
-#endif
-		uartcmd_permit();
-	}
-}
-
-
-/**
- * As long there's no game active, jump to the next animation.
- */
-static void uartcmd_next_anim(void) {
-#ifdef JOYSTICK_SUPPORT
-	if (waitForFire) {
-#endif
-		UART_PUTS_P(UART_STR_PROMPT);
-		uartcmd_clear_buffer();
-		longjmp(newmode_jmpbuf, mode);
-#ifdef JOYSTICK_SUPPORT
-	} else {
-		UART_PUTS_P(UART_STR_GAMEMO_ERR);
-	}
-#endif
-}
-
-
-/**
- * As long there's no game active, jump to the previous animation.
- */
-static void uartcmd_prev_anim(void) {
-#ifdef JOYSTICK_SUPPORT
-	if (waitForFire) {
-#endif
-		reverseMode = mode - 2;
-		UART_PUTS_P(UART_STR_PROMPT);
-		uartcmd_clear_buffer();
-		longjmp(newmode_jmpbuf, mode - 2);
-#ifdef JOYSTICK_SUPPORT
-	} else {
-		UART_PUTS_P(UART_STR_GAMEMO_ERR);
-	}
-#endif
-}
-
-
-/**
- * Extracts a positive number from an ASCII string (up to INT_MAX).
- * @param buffer String to be examined. Preceding whitespaces are skipped.
- *               ASCII control characters and [Space] act as delimiters.
- * @return The extracted number or -1 if a conversion error occurred.
- */
-int uartcmd_extract_num_arg(char *buffer) {
-	int res = -1;
-	uint8_t i = 0;
-	while (buffer[i] <= ' ' && buffer[i] != 0) ++i; // skip whitespaces
-	for (; buffer[i] > 0x20; ++i) {
-		if (res < 0) {
-			res = 0;
-		}
-		int const d = buffer[i] - '0';
-		if (isdigit(buffer[i]) && (res <= (INT_MAX / 10)) &&
-				((res * 10) <= (INT_MAX - d))) {
-			res = res * 10 + d;
-		} else {
-			res = -1;
-			break;
-		}
-	}
-	return res;
-}
-
-
-/**
- * Outputs current mode number via UART.
- */
-static void uartcmd_print_mode(void) {
-	char mode_output[6] = "";
-	snprintf_P(mode_output, 6, UART_STR_MODE, mode - 1);
-	uart_puts(mode_output);
-}
-
-
-/**
- * Retrieves desired mode number from command line and switches to that mode.
- */
-static void uartcmd_mode(void) {
-	if (g_rx_buffer[4] != 0) {
-		int new_mode = uartcmd_extract_num_arg(&g_rx_buffer[4]);
-		if (new_mode <= UINT8_MAX) {
-#ifdef JOYSTICK_SUPPORT
-			if (waitForFire) {
-#endif
-				UART_PUTS_P(UART_STR_PROMPT);
-				uartcmd_clear_buffer();
-				longjmp(newmode_jmpbuf, new_mode);
-#ifdef JOYSTICK_SUPPORT
-			} else {
-				UART_PUTS_P(UART_STR_GAMEMO_ERR);
-			}
-#endif
-		} else {
-			UART_PUTS_P(UART_STR_MODE_ERR);
-		}
-	} else {
-		uartcmd_print_mode();
-	}
-}
-
-
-#if defined(ANIMATION_TESTS) && defined(JOYSTICK_SUPPORT)
-/**
- * Prints current joystick status via UART.
- */
-static void uartcmd_joy_test(uint8_t *last) {
-	uint8_t joy_value = 0;
-	if (JOYISUP) {
-		joy_value |= UARTCMD_JOY_UP;
-	}
-	if (JOYISDOWN) {
-		joy_value |= UARTCMD_JOY_DOWN;
-	}
-	if (JOYISLEFT) {
-		joy_value |= UARTCMD_JOY_LEFT;
-	}
-	if (JOYISRIGHT) {
-		joy_value |= UARTCMD_JOY_RIGHT;
-	}
-	if (JOYISFIRE) {
-		joy_value |= UARTCMD_JOY_FIRE;
-	}
-
-	if (joy_value != *last) {
-		UART_PUTS_P(UART_STR_CLEARLINE);
-		if (joy_value & UARTCMD_JOY_UP) {
-			UART_PUTS_P(UART_STR_TEST_UP);
-		}
-		if (joy_value & UARTCMD_JOY_DOWN) {
-			UART_PUTS_P(UART_STR_TEST_DOWN);
-		}
-		if (joy_value & UARTCMD_JOY_LEFT) {
-			UART_PUTS_P(UART_STR_TEST_LEFT);
-		}
-		if (joy_value & UARTCMD_JOY_RIGHT) {
-			UART_PUTS_P(UART_STR_TEST_RIGHT);
-		}
-		if (joy_value & UARTCMD_JOY_FIRE) {
-			UART_PUTS_P(UART_STR_TEST_FIRE);
-		}
-		*last = joy_value;
-	}
-}
-#endif
-
-
-/**
- * Draws test patterns for display inspection.
- */
-static void uartcmd_test(void) {
-#ifdef ANIMATION_TESTS
-#	ifdef JOYSTICK_SUPPORT
-	if (waitForFire) {
-		waitForFire = 0;
-#	endif
-		uartcmd_forbid();
-		int pattern_no = uartcmd_extract_num_arg(&g_rx_buffer[4]);
-		if (pattern_no >= 0 && pattern_no <= NUMPLANE + 2) {
-			UART_PUTS_P(UART_STR_TEST_EXIT);
-			if (pattern_no <= NUMPLANE) {
-				test_level(pattern_no, true);
-			} else if (pattern_no == (NUMPLANE + 1)) {
-				test_palette(true);
-			} else if (pattern_no == (NUMPLANE + 2)) {
-				test_palette2(true);
-			}
-#	ifdef JOYSTICK_SUPPORT
-			uint8_t last_joy_value = 0;
-#	endif
-			while (UART_GETC() >= 0x20){ // wait for any control character
-#	ifdef JOYSTICK_SUPPORT
-				uartcmd_joy_test(&last_joy_value);
-				wait(20);
-#	endif
-			}
-		} else {
-			char msg[36] = "";
-			snprintf_P(msg, sizeof(msg), UART_STR_TEST_ERR, NUMPLANE + 2);
-			UART_PUTS(msg);
-		}
-		uartcmd_permit();
-#	ifdef JOYSTICK_SUPPORT
-		waitForFire = 1;
-	} else {
-		UART_PUTS_P(UART_STR_GAMETS_ERR);
-	}
-#	endif
-#else
-	UART_PUTS_P(UART_STR_NOTIMPL);
-#endif
-}
-
-
-/**
- * Perform a MCU reset by triggering the watchdog.
- */
-static void uartcmd_reset_borg(void) {
-	timer0_off();
-}
-
-
-/**
- * Appends new characters the buffer until a line break is entered.
- * @return true if a line break was entered, false otherwise.
- */
-static bool uartcmd_read_until_enter(void) {
-	static char last_line_break = '\n';
-
-	while (g_rx_index < (UART_BUFFER_SIZE - 1)) {
-		int uart_result = uart_getc();
-
-		if (uart_result < 0x100u) {
-			switch ((char)uart_result) {
-			case '\n': // line feed
-			case '\r': // carriage return
-				if ((g_rx_index > 0) || (uart_result == last_line_break)) {
-					UART_PUTS(CR);
-					g_rx_buffer[g_rx_index++] = 0;
-					last_line_break = uart_result;
-					return true;
-				}
-				break;
-			case '\b':   // BS
-			case '\177': // DEL
-				if (g_rx_index != 0) {
-					g_rx_buffer[--g_rx_index] = 0;
-					UART_PUTS_P(UART_STR_BACKSPACE);
-				}
-				break;
-			case '\f': // Form Feed (Ctrl-L), reprints the line buffer
-				UART_PUTS_P(UART_STR_CLEARLINE); // clear current line
-				UART_PUTS_P(UART_STR_PROMPT);    // output prompt
-				g_rx_buffer[g_rx_index] = 0;     // terminate input buffer
-				UART_PUTS(g_rx_buffer);          // finally reprint it
-				break;
-			case 21: // NAK (Ctrl-U), clears the line buffer
-				UART_PUTS_P(UART_STR_CLEARLINE); // clear current line
-				UART_PUTS_P(UART_STR_PROMPT);    // output prompt
-				uartcmd_clear_buffer();          // clear buffer
-				break;
-			case 27: // ignore Esc
-				break;
-			default:
-				// We don't accept control characters which are not handled
-				// above. We also limit the input to 7 bit ASCII.
-				if ((uart_result < 0x20) || (uart_result > 0x7f)) {
-					UART_PUTC('\a'); // complain via ASCII bell
-				} else {
-					g_rx_buffer[g_rx_index++] = uart_result; // accept input
-					UART_PUTC(uart_result); // echo input back to terminal
-				}
-				break;
-			}
-		} else if ((uart_result & 0xFF00u) != UART_NO_DATA) {
-			uartcmd_clear_buffer();
-			UART_PUTS_P(UART_STR_UART_ERR);
-			UART_PUTS_P(UART_STR_PROMPT);
-			break;
-		} else {
-			break;
-		}
-	}
-
-	if (g_rx_index >= (UART_BUFFER_SIZE - 1)) {
-		uartcmd_clear_buffer();
-		UART_PUTS_P(UART_STR_TOOLONG);
-		UART_PUTS_P(UART_STR_PROMPT);
-	}
-	return false;
-}
-
-
-/**
- * Checks for entered commands and dispatches them to the appropriate handler.
- */
-void uartcmd_process(void) {
-	if (uartcmd_processing_allowed() && uartcmd_read_until_enter()) {
-		if (!strncmp_P(g_rx_buffer, UART_CMD_ERASE, UART_BUFFER_SIZE)) {
-			uartcmd_erase_eeprom();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_HELP, UART_BUFFER_SIZE)) {
-			UART_PUTS_P(UART_STR_HELP);
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_MODE, 4)) {
-			uartcmd_mode();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_MSG, 4)) {
-			uartcmd_simple_message();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_NEXT, UART_BUFFER_SIZE)) {
-			uartcmd_next_anim();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_PREV, UART_BUFFER_SIZE)) {
-			uartcmd_prev_anim();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_RESET, UART_BUFFER_SIZE)) {
-			uartcmd_reset_borg();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_SCROLL, 7)) {
-			uartcmd_scroll_message();
-		} else if (!strncmp_P(g_rx_buffer, UART_CMD_TEST, 4)) {
-			uartcmd_test();
-		} else if (g_rx_buffer[0] != 0) {
-			UART_PUTS_P(UART_STR_UNKNOWN);
-		}
-		UART_PUTS_P(UART_STR_PROMPT);
-		uartcmd_clear_buffer();
-	}
-}

src/uart/uart_commands.h

@@ -1,38 +0,0 @@
-/*
- * uart_commands.h
- *
- *  Created on: 16.08.2014
- *      Author: chris
- */
-
-#ifndef UART_COMMANDS_H_
-#define UART_COMMANDS_H_
-
-#include <stdbool.h>
-#include <avr/interrupt.h>
-
-extern bool g_uartcmd_permit_processing;
-
-/**
- * Enables UART command processing.
- */
-inline static void uartcmd_permit(void) {
-	cli();
-	g_uartcmd_permit_processing = true;
-	sei();
-}
-
-
-/**
- * Disables UART command processing.
- */
-inline static void uartcmd_forbid(void) {
-	cli();
-	g_uartcmd_permit_processing = false;
-	sei();
-}
-
-
-void uartcmd_process(void);
-
-#endif /* UART_COMMANDS_H_ */

src/util.c

@@ -19,9 +19,6 @@ extern jmp_buf newmode_jmpbuf;
 #  include "can/borg_can.h"
 #endif
 
-#ifdef UART_SUPPORT
-#  include "uart/uart_commands.h"
-#endif
 
 void wait(int ms){
 /* Always use Timer1 except for the Arduino/LoL Shield platform. */
@@ -44,10 +41,6 @@ void wait(int ms){
 		bcan_process_messages();
 #endif
 
-#ifdef UART_SUPPORT
-		uartcmd_process();
-#endif
-
 #ifdef RFM12_SUPPORT
 		borg_rfm12_tick();
 #endif
@@ -57,7 +50,7 @@ void wait(int ms){
 			//PORTJOYGND &= ~(1<<BITJOY0);
 			//PORTJOYGND &= ~(1<<BITJOY1);
 			if (JOYISFIRE) {
-				longjmp(newmode_jmpbuf, 0xFEu);
+				longjmp(newmode_jmpbuf, 43);
 			}
 		}
 #endif