borgware-2d/scripts/Menuconfig

1698 lines
32 KiB
Plaintext
Raw Normal View History

#! /bin/sh
#
# This script is used to configure the borgware.
#
# It was derived from the Ethersex project.
#
# It was once derived from the Linux kernel's Menuconfig script.
#
# It uses a very modified/mutilated version of the "dialog" utility
# written by Savio Lam (lam836@cs.cuhk.hk). Savio is not responsible
# for this script or the version of dialog used by this script.
# Please do not contact him with questions. The official version of
# dialog is available at sunsite.unc.edu or a sunsite mirror.
#
#
# Change this to TRUE if you prefer all kernel options listed
# in a single menu rather than the standard menu hierarchy.
#
single_menu_mode=
#
# Make sure we're really running bash.
#
[ -z "$BASH" ] && { echo "Menuconfig requires bash" 1>&2; exit 1; }
#
# Cache function definitions, turn off posix compliance
#
set -h +o posix
# Given a configuration variable, set the global variable $x to its value,
# and the global variable $info to the string " (NEW)" if this is a new
# variable.
#
# This function looks for: (1) the current value, or (2) the default value
# from the arch-dependent defconfig file, or (3) a default passed by the caller.
function set_x_info () {
eval x=\$$1
if [ -z "$x" ]; then
eval `sed -n -e 's/# \(.*\) is not set.*/\1=n/' -e "/^$1=/p" arch/$ARCH/defconfig`
eval x=\${$1:-\"$2\"}
eval $1=$x
eval INFO_$1="' (NEW)'"
fi
eval info=\"\$INFO_$1\"
}
#
# Load the functions used by the config.in files.
#
# I do this because these functions must be redefined depending
# on whether they are being called for interactive use or for
# saving a configuration to a file.
#
# Thank the heavens bash supports nesting function definitions.
#
load_functions () {
#
# Additional comments
#
function comment () {
comment_ctr=$[ comment_ctr + 1 ]
echo -ne "': $comment_ctr' '--- $1' " >>MCmenu
}
function impossible () {
comment_ctr=$[ comment_ctr + 1 ]
echo -ne "': $comment_ctr' '[-] $1' " >>MCmenu
}
#
# Define a boolean to a specific value.
#
function define_bool () {
eval $1=$2
}
function define_tristate () {
eval $1=$2
}
function define_hex () {
eval $1=$2
}
function define_int () {
eval $1=$2
}
function define_string () {
eval $1=\"$2\"
}
#
# Create a boolean (Yes/No) function for our current menu
# which calls our local bool function.
#
function bool () {
set_x_info "$2" "n"
case $x in
y|m) flag="*" ;;
n) flag=" " ;;
esac
echo -ne "'$2' '[$flag] $1$info' " >>MCmenu
echo -e "function $2 () { l_bool '$2' \"\$1\" ;}\n" >>MCradiolists
}
#
# Create a tristate (Yes/No/Module) radiolist function
# which calls our local tristate function.
#
# Collapses to a boolean (Yes/No) if module support is disabled.
#
function tristate () {
if [ "$CONFIG_MODULES" != "y" ]
then
bool "$1" "$2"
else
set_x_info "$2" "n"
case $x in
y) flag="*" ;;
m) flag="M" ;;
*) flag=" " ;;
esac
echo -ne "'$2' '<$flag> $1$info' " >>MCmenu
echo -e "
function $2 () { l_tristate '$2' \"\$1\" ;}" >>MCradiolists
fi
}
#
# Create a tristate radiolist function which is dependent on
# another kernel configuration option.
#
# Quote from the original configure script:
#
# If the option we depend upon is a module,
# then the only allowable options are M or N. If Y, then
# this is a normal tristate. This is used in cases where modules
# are nested, and one module requires the presence of something
# else in the kernel.
#
function dep_tristate () {
ques="$1"
var="$2"
dep=y
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y ]; then
shift
elif [ "$1" = m ]; then
dep=m
shift
else
dep=n
shift $#
fi
done
if [ "$dep" = y ]; then
tristate "$ques" "$var"
elif [ "$dep" = m ]; then
mod_bool "$ques" "$var"
else
define_tristate "$var" n
fi
}
#
# Same as above, but now only Y and N are allowed as dependency
# (i.e. third and next arguments).
#
function dep_bool () {
ques="$1"
var="$2"
dep="$3"
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y ]; then
shift
else
dep=n
shift $#
fi
done
if [ "$dep" = y ]; then
bool "$ques" "$var"
else
impossible "$ques"
define_bool "$var" n
fi
}
function dep_bool_menu () {
ques="$1"; shift
echo "haveMCmenu$1=y" >> MCradiolists
dep_bool "$ques --->" $*
}
function dep_mbool () {
ques="$1"
var="$2"
dep=y
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y -o "$1" = m ]; then
shift
else
dep=n
shift $#
fi
done
if [ "$dep" = y ]; then
bool "$ques" "$var"
else
define_bool "$var" n
fi
}
#
# Add a menu item which will call our local int function.
#
function int () {
set_x_info "$2" "$3"
echo -ne "'$2' '($x) $1$info' " >>MCmenu
echo -e "function $2 () { l_int '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local hex function.
#
function hex () {
set_x_info "$2" "$3"
x=${x##*[x,X]}
echo -ne "'$2' '($x) $1$info' " >>MCmenu
echo -e "function $2 () { l_hex '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local string function.
#
function string () {
set_x_info "$2" "$3"
echo -ne "'$2' ' $1: \"$x\"$info' " >>MCmenu
echo -e "function $2 () { l_string '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local editor function.
#
function editor () {
echo -ne "'$2' ' Edit "$1"$info' " >>MCmenu
echo -e "function $2 () { l_editor '$1';}" >>MCradiolists
}
#
# Add a menu item which will call our local mac function.
#
function mac () {
set_x_info "$2" "$3"
echo -ne "'$2' ' $1: \"$x\"$info' " >>MCmenu
echo -e "function $2 () { l_mac '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local ipv4 function.
#
function ipv4 () {
set_x_info "$2" "$3"
echo -ne "'$2' ' $1: \"$x\"$info' " >>MCmenu
echo -e "function $2 () { l_ipv4 '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local ipv6 function.
#
function ipv6 () {
set_x_info "$2" "$3"
echo -ne "'$2' ' $1: \"$x\"$info' " >>MCmenu
echo -e "function $2 () { l_ipv6 '$1' '$2' '$3' '$x' ;}" >>MCradiolists
}
#
# Add a menu item which will call our local One-of-Many choice list.
#
function choice () {
#
# Need to remember params cause they're gonna get reset.
#
title=$1
choices=$2
default=$3
define_symbol=$4
current=
#
# Find out if one of the choices is already set.
# If it's not then make it the default.
#
set -- $choices
firstchoice=$2
if [ -n "$define_symbol" ]
then
firstchoice=$define_symbol
while [ -n "$2" ]
do
if eval [ \"_\$$define_symbol\" == \"_$2\" ]
then
current=$1
break
fi
shift ; shift
done
else
while [ -n "$2" ]
do
if eval [ \"_\$$2\" = \"_y\" ]
then
current=$1
break
fi
shift ; shift
done
fi
: ${current:=$default}
echo -ne "'$firstchoice' '($current) $title' " >>MCmenu
echo -e "
function $firstchoice () \
{ l_choice '$title' \"$choices\" \"$current\" \"$define_symbol\" ;}" >>MCradiolists
}
} # END load_functions()
#
# Extract available help for an option from Configure.help
# and send it to standard output.
#
# Most of this function was borrowed from the original kernel
# Configure script.
#
function extract_help () {
if [ -f Documentation/Configure.help ]
then
#first escape regexp special characters in the argument:
var=$(echo "$1"|sed 's/[][\/.^$*]/\\&/g')
#now pick out the right help text:
text=$(sed -n "/^$var[ ]*\$/,\${
/^$var[ ]*\$/c\\
${var}:\\
/^#/b
/^[^ ]/q
s/^ //
/<file:\\([^>]*\\)>/s//\\1/g
p
}" Documentation/Configure.help)
if [ -z "$text" ]
then
echo "There is no help available for this option."
return 1
else
echo "$text"
fi
else
echo "There is no help available for this option."
return 1
fi
}
#
# Activate a help dialog.
#
function help () {
if extract_help $1 >help.out
then
$DIALOG --backtitle "$backtitle" --title "$2"\
--textbox help.out $ROWS $COLS
else
$DIALOG --backtitle "$backtitle" \
--textbox help.out $ROWS $COLS
fi
rm -f help.out
}
#
# Show the README file.
#
function show_readme () {
$DIALOG --backtitle "$backtitle" \
--textbox scripts/README.Menuconfig $ROWS $COLS
}
#
# Begin building the dialog menu command and Initialize the
# Radiolist function file.
#
function menu_name () {
echo -ne "$DIALOG --title '$1'\
--backtitle '$backtitle' \
--menu '$menu_instructions' \
$ROWS $COLS $((ROWS-10)) \
'$default' " >MCmenu
>MCradiolists
}
#
# Add a submenu option to the menu currently under construction.
#
function submenu () {
echo -ne "'activate_menu $2' '$1 --->' " >>MCmenu
}
#
# Handle a boolean (Yes/No) option.
#
function l_bool () {
if [ -n "$2" ]
then
case "$2" in
y|m) eval $1=y ;;
c) eval x=\$$1
case $x in
y) eval $1=n ;;
n) eval $1=y ;;
*) eval $1=y ;;
esac ;;
*) eval $1=n ;;
esac
else
get_cmd='echo $haveMCmenu'"$1"
value="`eval $get_cmd`"
if [ -n "$value" ]; then
eval activate_menu MCmenu$1
else
echo -ne "\007"
fi
fi
}
#
# Same as bool() except options are (Module/No)
#
function mod_bool () {
if [ "$CONFIG_MODULES" != "y" ]; then
define_bool "$2" "n"
else
set_x_info "$2" "n"
case $x in
y|m) flag='M' ;;
*) flag=' ' ;;
esac
echo -ne "'$2' '<$flag> $1$info' " >>MCmenu
echo -e "function $2 () { l_mod_bool '$2' \"\$1\" ;}" >>MCradiolists
fi
}
#
# Same as l_bool() except options are (Module/No)
#
function l_mod_bool() {
if [ -n "$2" ]
then
case "$2" in
y) echo -en "\007"
${DIALOG} --backtitle "$backtitle" \
--infobox "\
This feature depends on another which has been configured as a module. \
As a result, this feature will be built as a module." 4 70
sleep 5
eval $1=m ;;
m) eval $1=m ;;
c) eval x=\$$1
case $x in
m) eval $1=n ;;
n) eval $1=m ;;
*) eval $1=m ;;
esac ;;
*) eval $1=n ;;
esac
else
echo -ne "\007"
fi
}
#
# Handle a tristate (Yes/No/Module) option.
#
function l_tristate () {
if [ -n "$2" ]
then
eval x=\$$1
case "$2" in
y) eval $1=y ;;
m) eval $1=m ;;
c) eval x=\$$1
case $x in
y) eval $1=n ;;
n) eval $1=m ;;
m) eval $1=y ;;
*) eval $1=y ;;
esac ;;
*) eval $1=n ;;
esac
else
echo -ne "\007"
fi
}
#
# Create a dialog for entering an integer into a kernel option.
#
function l_int () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_int" \
10 75 "$4" 2>MCdialog.out
then
answer="`cat MCdialog.out`"
answer="${answer:-$3}"
# Semantics of + and ? in GNU expr changed, so
# we avoid them:
if expr "$answer" : '0$' '|' "$answer" : '[1-9][0-9]*$' '|' "$answer" : '-[1-9][0-9]*$' >/dev/null
then
eval $2=\"$answer\"
else
eval $2=\"$3\"
echo -en "\007"
${DIALOG} --backtitle "$backtitle" \
--infobox "You have made an invalid entry." 3 43
sleep 2
fi
break
fi
help "$2" "$1"
done
}
#
# Create a dialog for entering a hexadecimal into a kernel option.
#
function l_hex () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_hex" \
10 75 "$4" 2>MCdialog.out
then
answer="`cat MCdialog.out`"
answer="${answer:-$3}"
answer="${answer##*[x,X]}"
if expr "$answer" : '[0-9a-fA-F][0-9a-fA-F]*$' >/dev/null
then
eval $2=\"$answer\"
else
eval $2=\"$3\"
echo -en "\007"
${DIALOG} --backtitle "$backtitle" \
--infobox "You have made an invalid entry." 3 43
sleep 2
fi
break
fi
help "$2" "$1"
done
}
#
# Create a dialog for entering a string into a kernel option.
#
function l_string () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_string" \
10 75 "$4" 2>MCdialog.out
then
answer="`cat MCdialog.out`"
answer="${answer:-$3}"
#
# Someone may add a nice check for the entered
# string here...
#
eval $2=\"$answer\"
break
fi
help "$2" "$1"
done
}
#
# Use an editor to edit a certain file
#
function l_editor() {
if [ -n "$EDITOR" ]; then
$EDITOR $1
elif [ -n "`which nano`" ]; then
nano $1
fi
}
#
# Create a dialog for entering a MAC address
#
function l_mac () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_ipv4" \
10 75 "$4" 2>MCdialog.out
then
answer="`cat MCdialog.out`"
answer="${answer:-$3}"
if expr "$answer" : '[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]$' >/dev/null
then
eval $2=\"$answer\"
else
eval $2=\"$3\"
echo -en "\007"
$DIALOG --backtitle "$backtitle" \
--infobox "You have made an invalid entry." 3 43
sleep 2
fi
break
fi
help "$2" "$1"
done
}
#
# Create a dialog for entering an IPv4 address
#
function l_ipv4 () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_ipv4" \
10 75 "$4" 2>MCdialog.out
then
answer="`cat MCdialog.out`"
answer="${answer:-$3}"
if expr "$answer" : '[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$' >/dev/null
then
eval $2=\"$answer\"
else
eval $2=\"$3\"
echo -en "\007"
$DIALOG --backtitle "$backtitle" \
--infobox "You have made an invalid entry." 3 43
sleep 2
fi
break
fi
help "$2" "$1"
done
}
#
# Create a dialog for entering an IPv6 address
#
function l_ipv6 () {
while true
do
if $DIALOG --title "$1" \
--backtitle "$backtitle" \
--inputbox "$inputbox_instructions_ipv6" \
10 75 "$4" 2>MCdialog.out
then
answer="`scripts/ipv6-expand "$(cat MCdialog.out)"`"
answer="${answer:-$3}"
if scripts/ipv6-check "$answer"
then
eval $2=\"$answer\"
else
eval $2=\"$3\"
echo -en "\007"
$DIALOG --backtitle "$backtitle" \
--infobox "You have made an invalid entry." 3 43
sleep 2
fi
break
fi
help "$2" "$1"
done
}
#
# Handle a one-of-many choice list.
#
function l_choice () {
#
# Need to remember params cause they're gonna get reset.
#
title="$1"
choices="$2"
current="$3"
define_symbol="$4"
chosen=
#
# Scan current value of choices and set radiolist switches.
#
list=
set -- $choices
firstchoice=$2
while [ -n "$2" ]
do
case "$1" in
"$current"*) if [ -z "$chosen" ]; then
list="$list $2 $1 ON "
chosen=1
else
list="$list $2 $1 OFF "
fi ;;
*) list="$list $2 $1 OFF " ;;
esac
shift ; shift
done
while true
do
if $DIALOG --title "$title" \
--backtitle "$backtitle" \
--radiolist "$radiolist_instructions" \
15 70 6 $list 2>MCdialog.out
then
choice=`cat MCdialog.out`
break
fi
help "$firstchoice" "$title"
done
#
# Now set the boolean value of each option based on
# the selection made from the radiolist.
#
set -- $choices
while [ -n "$2" ]
do
if [ "$2" = "$choice" ]
then
if [ \! -z "$define_symbol" ]; then
eval $define_symbol="$2"
else
eval $2=\"y\"
fi
else
if [ -z "$define_symbol" ]; then
eval $2=\"n\"
fi
fi
shift ; shift
done
}
#
# Call awk, and watch for error codes, etc.
#
function callawk () {
awk "$1" || { echo "Awk died with error code $?. Giving up."; exit 1; }
}
#
# A faster awk based recursive parser. (I hope)
#
function parser1 () {
callawk '
BEGIN {
menu_no = 0
comment_is_option = 0
parser("'$CONFIG_IN'","MCmenu0")
}
function parser(ifile,menu) {
while ((getline <ifile) > 0) {
if ($1 == "mainmenu_option") {
comment_is_option = "1"
}
else if ($1 == "dep_bool_menu") {
print >>menu
split ($0,ll,"\\\"");
split (ll[3],mm," ");
newmenu = sprintf("MCmenu%s", mm[1]);
printf( "function MCmenu%s () {\n"\
"default=$1\n"\
"menu_name \"%s\"\n",\
mm[1], ll[2]) > newmenu
parser(ifile, newmenu)
}
else if ($1 == "comment" && comment_is_option == "1") {
comment_is_option= "0"
sub($1,"",$0)
++menu_no
printf("submenu %s MCmenu%s\n", $0, menu_no) >>menu
newmenu = sprintf("MCmenu%d", menu_no);
printf( "function MCmenu%s () {\n"\
"default=$1\n"\
"menu_name %s\n",\
menu_no, $0) >newmenu
parser(ifile, newmenu)
}
else if ($0 ~ /^#|\$MAKE|mainmenu_name/) {
printf("") >>menu
}
else if ($1 ~ "endmenu") {
printf("}\n") >>menu
return
}
else if ($1 == "source") {
parser($2,menu)
}
else {
print >>menu
}
}
}'
}
#
# Secondary parser for single menu mode.
#
function parser2 () {
callawk '
BEGIN {
parser("'$CONFIG_IN'","MCmenu0")
}
function parser(ifile,menu) {
while ((getline <ifile) > 0) {
if ($0 ~ /^#|$MAKE|mainmenu_name/) {
printf("") >>menu
}
else if ($1 ~ /mainmenu_option|endmenu/) {
printf("") >>menu
}
else if ($1 == "source") {
parser($2,menu)
}
else {
print >>menu
}
}
}'
}
#
# Parse all the config.in files into mini scripts.
#
function parse_config_files () {
rm -f MCmenu*
echo "function MCmenu0 () {" >MCmenu0
echo 'default=$1' >>MCmenu0
echo "menu_name 'Main Menu'" >>MCmenu0
echo "g_dflt_config" >>MCmenu0
if [ "_$single_menu_mode" = "_TRUE" ]
then
parser2
else
parser1
fi
echo "comment ''" >>MCmenu0
echo "g_alt_config" >>MCmenu0
echo "s_alt_config" >>MCmenu0
echo "}" >>MCmenu0
#
# These mini scripts must be sourced into the current
# environment in order for all of this to work. Leaving
# them on the disk as executables screws up the recursion
# in activate_menu(), among other things. Once they are
# sourced we can discard them.
#
for i in MCmenu*
do
echo -n "."
source ./$i
done
#rm -f MCmenu*
}
#
# This is the menu tree's bootstrap.
#
# Executes the parsed menus on demand and creates a set of functions,
# one per configuration option. These functions will in turn execute
# dialog commands or recursively call other menus.
#
function activate_menu () {
rm -f lxdialog.scrltmp
while true
do
comment_ctr=0 #So comment lines get unique tags
$1 "$default" 2> MCerror #Create the lxdialog menu & functions
if [ "$?" != "0" ]
then
clear
cat <<EOM
Menuconfig has encountered a possible error in one of the
configuration files and is unable to continue. Here is the error
report:
EOM
sed 's/^/ Q> /' MCerror
cat <<EOM
EOM
cleanup
exit 1
fi
rm -f MCerror
. ./MCradiolists #Source the menu's functions
. ./MCmenu 2>MCdialog.out #Activate the lxdialog menu
ret=$?
read selection <MCdialog.out
case "$ret" in
0|3|4|5|6)
defaults="$selection$defaults" #pseudo stack
case "$ret" in
0) eval $selection ;;
3) eval $selection y ;;
4) eval $selection n ;;
5) eval $selection m ;;
6) eval $selection c ;;
esac
default="${defaults%%*}" defaults="${defaults#*}"
;;
2)
default="${selection%%\ *}"
case "$selection" in
*"-->"*|*"alt_config"*)
show_readme ;;
*)
eval help $selection ;;
esac
;;
255|1)
break
;;
139)
stty sane
clear
cat <<EOM
There seems to be a problem with the lxdialog companion utility which is
built prior to running Menuconfig. Usually this is an indicator that you
have upgraded/downgraded your ncurses libraries and did not remove the
old ncurses header file(s) in /usr/include or /usr/include/ncurses.
It is VERY important that you have only one set of ncurses header files
and that those files are properly version matched to the ncurses libraries
installed on your machine.
You may also need to rebuild lxdialog. This can be done by moving to
the /usr/src/linux/scripts/lxdialog directory and issuing the
"make clean all" command.
EOM
cleanup
exit 139
;;
esac
done
}
g_dflt_config () {
echo -n "get_dflt_config 'Load a Default Configuration --->' "\
>>MCmenu
}
get_dflt_config () {
config_files=`ls ./profiles/`
choices=""
for file in $config_files
do
choices="$choices $file $file 0"
done
while true
do
$DIALOG --title "Load Default Configuration" \
--backtitle "$backtitle" \
--radiolist "\
Select the default profile you wish to load. \
<Esc><Esc> to abort." \
15 70 7 \
$choices \
2>MCdialog.out
exit_status=$?
if [ $exit_status -eq 0 ]; then
choice=`cat MCdialog.out`
echo $choice
load_config_file "./profiles/$choice"
break
elif [ $exit_status -eq 255 ]; then
break # ESC-ESC ...
elif [ $exit_status -eq 1 ]; then
help "$firstchoice" "$title"
fi
done
rm -f help.out MCdialog.out
}
#
# Create a menu item to load an alternate configuration file.
#
g_alt_config () {
echo -n "get_alt_config 'Load an Alternate Configuration File' "\
>>MCmenu
}
#
# Get alternate config file name and load the
# configuration from it.
#
get_alt_config () {
set -f ## Switch file expansion OFF
while true
do
ALT_CONFIG="${ALT_CONFIG:-$DEFAULTS}"
$DIALOG --backtitle "$backtitle" \
--inputbox "\
Enter the name of the configuration file you wish to load. \
Accept the name shown to restore the configuration you \
last retrieved. Leave blank to abort."\
11 55 "$ALT_CONFIG" 2>MCdialog.out
if [ "$?" = "0" ]
then
ALT_CONFIG=`cat MCdialog.out`
[ "_" = "_$ALT_CONFIG" ] && break
if eval [ -r \"$ALT_CONFIG\" ]
then
eval load_config_file \"$ALT_CONFIG\"
break
else
echo -ne "\007"
$DIALOG --backtitle "$backtitle" \
--infobox "File does not exist!" 3 38
sleep 2
fi
else
cat <<EOM >help.out
For various reasons, one may wish to keep several different kernel
configurations available on a single machine.
If you have saved a previous configuration in a file other than the
kernel's default, entering the name of the file here will allow you
to modify that configuration.
If you are uncertain, then you have probably never used alternate
configuration files. You should therefor leave this blank to abort.
EOM
$DIALOG --backtitle "$backtitle"\
--title "Load Alternate Configuration"\
--textbox help.out $ROWS $COLS
fi
done
set +f ## Switch file expansion ON
rm -f help.out MCdialog.out
}
#
# Create a menu item to store an alternate config file.
#
s_alt_config () {
echo -n "save_alt_config 'Save Configuration to an Alternate File' "\
>>MCmenu
}
#
# Get an alternate config file name and save the current
# configuration to it.
#
save_alt_config () {
set -f ## Switch file expansion OFF
while true
do
$DIALOG --backtitle "$backtitle" \
--inputbox "\
Enter a filename to which this configuration should be saved \
as an alternate. Leave blank to abort."\
10 55 "$ALT_CONFIG" 2>MCdialog.out
if [ "$?" = "0" ]
then
ALT_CONFIG=`cat MCdialog.out`
[ "_" = "_$ALT_CONFIG" ] && break
if eval touch $ALT_CONFIG 2>/dev/null
then
eval save_configuration $ALT_CONFIG
load_functions ## RELOAD
break
else
echo -ne "\007"
$DIALOG --backtitle "$backtitle" \
--infobox "Can't create file! Probably a nonexistent directory." 3 60
sleep 2
fi
else
cat <<EOM >help.out
For various reasons, one may wish to keep different kernel
configurations available on a single machine.
Entering a file name here will allow you to later retrieve, modify
and use the current configuration as an alternate to whatever
configuration options you have selected at that time.
If you are uncertain what all this means then you should probably
leave this blank.
EOM
$DIALOG --backtitle "$backtitle"\
--title "Save Alternate Configuration"\
--textbox help.out $ROWS $COLS
fi
done
set +f ## Switch file expansion ON
rm -f help.out MCdialog.out
}
#
# Load config options from a file.
# Converts all "# OPTION is not set" lines to "OPTION=n" lines
#
function load_config_file () {
awk '
/# .* is not set.*/ { printf("%s=n\n", $2) }
! /# .* is not set.*/ { print }
' $1 >.tmpconfig
source ./.tmpconfig
rm -f .tmpconfig
}
#
# Just what it says.
#
save_configuration () {
echo
echo -n "Saving your Borg configuration."
#
# Now, let's redefine the configuration functions for final
# output to the config files.
#
# Nested function definitions, YIPEE!
#
function bool () {
set_x_info "$2" "n"
eval define_bool \"$2\" \"$x\"
}
function tristate () {
set_x_info "$2" "n"
eval define_tristate \"$2\" \"$x\"
}
function dep_tristate () {
set_x_info "$2" "n"
var="$2"
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y ]; then
shift
elif [ "$1" = m -a "$x" != n ]; then
x=m; shift
else
x=n; shift $#
fi
done
define_tristate "$var" "$x"
}
function dep_bool () {
set_x_info "$2" "n"
var="$2"
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y ]; then
shift
else
x=n; shift $#
fi
done
define_bool "$var" "$x"
}
function dep_bool_menu () {
ques="$1"; shift
dep_bool "" $*
}
function dep_mbool () {
set_x_info "$2" "n"
var="$2"
shift 2
while [ $# -gt 0 ]; do
if [ "$1" = y -o "$1" = m ]; then
shift
else
x=n; shift $#
fi
done
define_bool "$var" "$x"
}
function int () {
set_x_info "$2" "$3"
echo "$2=$x" >>$CONFIG
echo "#define $2 ($x)" >>$CONFIG_H
}
function hex () {
set_x_info "$2" "$3"
echo "$2=$x" >>$CONFIG
echo "#define $2 \"$(echo "$x" | sed -e 's/\(..\)/\\x\1/g')\"" >>$CONFIG_H
}
function string () {
set_x_info "$2" "$3"
echo "$2=\"$x\"" >>$CONFIG
echo "#define $2 \"$x\"" >>$CONFIG_H
}
function mac () {
set_x_info "$2" "$3"
echo "$2=\"$x\"" >>$CONFIG
echo "#define $2 " \
"\"\\x$(echo "$x" | sed -e 's;:;\\x;g')\"" >> $CONFIG_H
}
function ipv4 () {
set_x_info "$2" "$3"
echo "$2=\"$x\"" >>$CONFIG
echo "#define $2 uip_ipaddr(ip," \
$(echo "$x" | sed -e 's;\.;,;g') ")" >> $CONFIG_H
}
function ipv6 () {
set_x_info "$2" "$3"
echo "$2=\"$x\"" >>$CONFIG
echo "#define $2 uip_ip6addr(ip," \
"0x"$(echo "$x" | sed -e 's;:;,0x;g') ")" >> $CONFIG_H
}
function define_hex () {
eval $1=\"$2\"
echo "$1=$2" >>$CONFIG
echo "#define $1 0x${2##*[x,X]}" >>$CONFIG_H
}
function define_int () {
eval $1=\"$2\"
echo "$1=$2" >>$CONFIG
echo "#define $1 ($2)" >>$CONFIG_H
}
function define_symbol () {
eval $1=\"$2\"
echo "$1=$2" >>$CONFIG
echo "#define $1 $2" >>$CONFIG_H
}
function define_string () {
eval $1=\"$2\"
echo "$1=\"$2\"" >>$CONFIG
echo "#define $1 \"$2\"" >>$CONFIG_H
}
function define_bool () {
define_tristate "$1" "$2"
}
function define_tristate () {
eval $1=\"$2\"
case "$2" in
y)
echo "$1=y" >>$CONFIG
echo "#define $1 1" >>$CONFIG_H
;;
m)
if [ "$CONFIG_MODULES" = "y" ]
then
echo "$1=m" >>$CONFIG
echo "#undef $1" >>$CONFIG_H
echo "#define $1_MODULE 1" >>$CONFIG_H
else
echo "$1=y" >>$CONFIG
echo "#define $1 1" >>$CONFIG_H
fi
;;
n)
echo "# $1 is not set" >>$CONFIG
echo "#undef $1" >>$CONFIG_H
;;
esac
}
function choice () {
#
# Find the first choice that's already set to 'y'
#
choices="$2"
default="$3"
define_symbol="$4"
current=
chosen=
set -- $choices
if [ -n "$define_symbol" ]
then
while [ -n "$2" ]
do
if eval [ \"_\$$define_symbol\" == \"_$2\" ]
then
current=$1
break
fi
shift ; shift
done
else
while [ -n "$2" ]
do
if eval [ \"_\$$2\" = \"_y\" ]
then
current=$1
break
fi
shift ; shift
done
fi
#
# Use the default if none were set.
#
: ${current:=$default}
#
# Output all choices (to be compatible with other configs).
#
set -- $choices
while [ -n "$2" ]
do
case "$1" in
"$current"*) if [ -z "$chosen" ]; then
if [ \! -z "$define_symbol" ]; then
echo "$define_symbol=$2" >>$CONFIG
echo "#define $define_symbol $2" >>$CONFIG_H
else
define_bool "$2" "y"
fi
chosen=1
else
if [ -z "$define_symbol" ]; then
define_bool "$2" "n"
fi
fi ;;
*) if [ -z "$define_symbol" ]; then
define_bool "$2" "n"
fi ;;
esac
shift ; shift
done
}
function mainmenu_name () {
:
}
function mainmenu_option () {
comment_is_option=TRUE
}
function endmenu () {
:
}
function comment () {
if [ "$comment_is_option" ]
then
comment_is_option=
echo >>$CONFIG
echo "#" >>$CONFIG
echo "# $1" >>$CONFIG
echo "#" >>$CONFIG
echo >>$CONFIG_H
echo "/*" >>$CONFIG_H
echo " * $1" >>$CONFIG_H
echo " */" >>$CONFIG_H
fi
}
echo -n "."
DEF_CONFIG="${1:-.config}"
DEF_CONFIG_H="autoconf.h"
CONFIG=.tmpconfig
CONFIG_H=.tmpconfig.h
echo "#" >$CONFIG
echo "# Automatically generated by make menuconfig: don't edit" >>$CONFIG
echo "#" >>$CONFIG
echo "/*" >$CONFIG_H
echo " * Automatically generated by make menuconfig: don't edit" >>$CONFIG_H
echo " */" >>$CONFIG_H
echo "#define AUTOCONF_INCLUDED" >> $CONFIG_H
echo -n "."
if . $CONFIG_IN >>.menuconfig.log 2>&1
then
if [ "$DEF_CONFIG" = ".config" ]
then
mv $CONFIG_H $DEF_CONFIG_H
fi
if [ -f "$DEF_CONFIG" ]
then
rm -f ${DEF_CONFIG}.old
mv $DEF_CONFIG ${DEF_CONFIG}.old
fi
mv $CONFIG $DEF_CONFIG
return 0
else
return 1
fi
}
#
# Remove temporary files
#
cleanup () {
cleanup1
cleanup2
}
cleanup1 () {
rm -f MCmenu* MCradiolists MCdialog.out help.out
}
cleanup2 () {
rm -f .tmpconfig .tmpconfig.h
}
set_geometry () {
# Some distributions export these with incorrect values
# which can really screw up some ncurses programs.
LINES= COLUMNS=
ROWS=${1:-24} COLS=${2:-80}
# Just in case the nasty rlogin bug returns.
#
[ $ROWS = 0 ] && ROWS=24
[ $COLS = 0 ] && COLS=80
if [ $ROWS -lt 19 -o $COLS -lt 80 ]
then
echo -e "\n\007Your display is too small to run Menuconfig!"
echo "It must be at least 19 lines by 80 columns."
exit 1
fi
ROWS=$((ROWS-4)) COLS=$((COLS-5))
}
set_geometry `stty size 2>/dev/null`
menu_instructions="\
Arrow keys navigate the menu. \
<Enter> selects submenus --->. \
Highlighted letters are hotkeys. \
Pressing <Y> includes, <N> excludes. <Esc><Esc> to exit, <?> for Help. \
Legend: [*] enabled [ ] disabled [-] not available"
radiolist_instructions="\
Use the arrow keys to navigate this window or \
press the hotkey of the item you wish to select \
followed by the <SPACE BAR>.
Press <?> for additional information about this option."
inputbox_instructions_int="\
Please enter a decimal value. \
Fractions will not be accepted. \
Use the <TAB> key to move from the input field to the buttons below it."
inputbox_instructions_hex="\
Please enter a hexadecimal string. \
Use the <TAB> key to move from the input field to the buttons below it."
inputbox_instructions_string="\
Please enter a string value. \
Use the <TAB> key to move from the input field to the buttons below it."
DIALOG="./scripts/lxdialog/lxdialog"
backtitle="Borg Configuration"
trap "cleanup ; exit 1" 1 2 15
#
# Locate default files.
#
CONFIG_IN=./config.in
if [ "$1" != "" ] ; then
CONFIG_IN=$1
fi
DEFAULTS=scripts/profiles/defconfig
if [ -f .config ]; then
DEFAULTS=.config
fi
if [ -f $DEFAULTS ]
then
echo "Using defaults found in" $DEFAULTS
load_config_file $DEFAULTS
else
echo "No defaults found"
fi
# Fresh new log.
>.menuconfig.log
# Load the functions used by the config.in files.
echo -n "Preparing scripts: functions"
load_functions
if [ ! -e $CONFIG_IN ]
then
echo "Your main config.in file ($CONFIG_IN) does not exist"
exit 1
fi
if [ ! -x $DIALOG ]
then
echo "Your lxdialog utility does not exist"
exit 1
fi
#
# Read config.in files and parse them into one shell function per menu.
#
echo -n ", parsing"
parse_config_files $CONFIG_IN
echo "done."
#
# Start the ball rolling from the top.
#
activate_menu MCmenu0
#
# All done!
#
cleanup1
#
# Confirm and Save
#
if $DIALOG --backtitle "$backtitle" \
--yesno "Do you wish to save your new Borg configuration?" 5 60
then
save_configuration
echo
echo
echo "*** End of Borg configuration."
echo
else
echo
echo
echo Your Borg configuration changes were NOT saved.
echo
fi
# Remove log if empty.
if [ ! -s .menuconfig.log ] ; then
rm -f .menuconfig.log
fi
exit 0