made a first version with 7-seg number output

This commit is contained in:
Lucas Pleß 2013-06-14 01:35:59 +02:00
parent 7dc7d1ed27
commit 7fa7355afa
8 changed files with 1542 additions and 143 deletions

View File

@ -2,19 +2,21 @@
<project version="4">
<component name="ChangeListManager">
<list default="true" id="9fad4545-a424-4a82-86dc-76602cf3eef3" name="Default" comment="">
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/Makefile" afterPath="$PROJECT_DIR$/powerboard/Makefile" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/src/main.c" afterPath="$PROJECT_DIR$/powerboard/src/main.c" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/src/main.h" afterPath="$PROJECT_DIR$/powerboard/src/main.h" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/src/uart.h" afterPath="$PROJECT_DIR$/powerboard/src/uart.h" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/src/utils.c" afterPath="$PROJECT_DIR$/powerboard/src/utils.c" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/powerboard/src/utils.h" afterPath="$PROJECT_DIR$/powerboard/src/utils.h" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/main.c" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/main.h" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/uart.c" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/uart.h" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/utils.c" />
<change type="NEW" beforePath="" afterPath="$PROJECT_DIR$/displayboard/src/utils.h" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/displayboard/Makefile" afterPath="$PROJECT_DIR$/displayboard/Makefile" />
<change type="MODIFICATION" beforePath="$PROJECT_DIR$/.idea/workspace.xml" afterPath="$PROJECT_DIR$/.idea/workspace.xml" />
</list>
<ignored path="bikegenerator.iws" />
<ignored path=".idea/workspace.xml" />
<file path="/Makefile" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371032328243" ignored="false" />
<file path="/Dummy.txt" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371043904548" ignored="false" />
<file path="/main.c" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371074113650" ignored="false" />
<file path="/Dummy.txt" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371166540202" ignored="false" />
<file path="/main.c" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371163595702" ignored="false" />
<file path="/uart.c" changelist="9fad4545-a424-4a82-86dc-76602cf3eef3" time="1371164805619" ignored="false" />
<option name="TRACKING_ENABLED" value="true" />
<option name="SHOW_DIALOG" value="false" />
<option name="HIGHLIGHT_CONFLICTS" value="true" />
@ -29,7 +31,6 @@
<disable_hints />
</component>
<component name="DebuggerManager">
<ui_properties default_suspend_policy="SuspendAll" default_condition_enabled="true" />
<breakpoint_any default_suspend_policy="SuspendAll" default_condition_enabled="true">
<breakpoint>
<option name="NOTIFY_CAUGHT" value="true" />
@ -66,6 +67,7 @@
<option name="LOG_MESSAGE" value="" />
</breakpoint>
</breakpoint_any>
<ui_properties default_suspend_policy="SuspendAll" default_condition_enabled="true" />
<breakpoint_rules />
<ui_properties />
</component>
@ -75,10 +77,19 @@
</component>
<component name="FileEditorManager">
<leaf>
<file leaf-file-name="main.c" pinned="false" current="true" current-in-tab="true">
<entry file="file://$PROJECT_DIR$/powerboard/src/main.c">
<file leaf-file-name="main.h" pinned="false" current="false" current-in-tab="false">
<entry file="file://$PROJECT_DIR$/displayboard/src/main.h">
<provider selected="true" editor-type-id="text-editor">
<state line="179" column="32" selection-start="4434" selection-end="4434" vertical-scroll-proportion="0.67713004">
<state line="20" column="28" selection-start="506" selection-end="522" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
</file>
<file leaf-file-name="main.c" pinned="false" current="true" current-in-tab="true">
<entry file="file://$PROJECT_DIR$/displayboard/src/main.c">
<provider selected="true" editor-type-id="text-editor">
<state line="98" column="17" selection-start="1974" selection-end="1974" vertical-scroll-proportion="0.738255">
<folding />
</state>
</provider>
@ -111,7 +122,13 @@
<option value="$PROJECT_DIR$/powerboard/src/utils.c" />
<option value="$PROJECT_DIR$/powerboard/src/utils.h" />
<option value="$PROJECT_DIR$/powerboard/Makefile" />
<option value="$PROJECT_DIR$/displayboard/src/utils.h" />
<option value="$PROJECT_DIR$/displayboard/Makefile" />
<option value="$PROJECT_DIR$/displayboard/src/main.h" />
<option value="$PROJECT_DIR$/powerboard/src/main.c" />
<option value="$PROJECT_DIR$/displayboard/src/uart.c" />
<option value="$PROJECT_DIR$/displayboard/src/uart.h" />
<option value="$PROJECT_DIR$/displayboard/src/main.c" />
</list>
</option>
</component>
@ -147,7 +164,6 @@
<sortByType />
</navigator>
<panes>
<pane id="PackagesPane" />
<pane id="ProjectPane">
<subPane>
<PATH>
@ -190,28 +206,49 @@
<option name="myItemType" value="com.intellij.ide.projectView.impl.nodes.PsiDirectoryNode" />
</PATH_ELEMENT>
</PATH>
<PATH>
<PATH_ELEMENT>
<option name="myItemId" value="bikegenerator" />
<option name="myItemType" value="com.intellij.ide.projectView.impl.nodes.ProjectViewProjectNode" />
</PATH_ELEMENT>
<PATH_ELEMENT>
<option name="myItemId" value="displayboard" />
<option name="myItemType" value="com.intellij.ide.projectView.impl.nodes.PsiDirectoryNode" />
</PATH_ELEMENT>
<PATH_ELEMENT>
<option name="myItemId" value="src" />
<option name="myItemType" value="com.intellij.ide.projectView.impl.nodes.PsiDirectoryNode" />
</PATH_ELEMENT>
</PATH>
</subPane>
</pane>
<pane id="Scope" />
<pane id="PackagesPane" />
</panes>
</component>
<component name="PropertiesComponent">
<property name="project.structure.last.edited" value="Project" />
<property name="GoToFile.includeJavaFiles" value="false" />
<property name="project.structure.proportion" value="0.0" />
<property name="options.splitter.main.proportions" value="0.3" />
<property name="MemberChooser.sorted" value="false" />
<property name="recentsLimit" value="5" />
<property name="options.lastSelected" value="project.propCompiler" />
<property name="last_opened_file_path" value="$PROJECT_DIR$/../.." />
<property name="last_opened_file_path" value="$PROJECT_DIR$" />
<property name="project.structure.side.proportion" value="0.2" />
<property name="MemberChooser.copyJavadoc" value="false" />
<property name="GoToClass.toSaveIncludeLibraries" value="false" />
<property name="WebServerToolWindowFactoryState" value="false" />
<property name="restartRequiresConfirmation" value="true" />
<property name="MemberChooser.showClasses" value="true" />
<property name="GoToClass.includeLibraries" value="false" />
<property name="options.searchVisible" value="true" />
<property name="options.splitter.details.proportions" value="0.2" />
<property name="options.searchVisible" value="true" />
</component>
<component name="RecentsManager">
<key name="CopyFile.RECENT_KEYS">
<recent name="$PROJECT_DIR$/displayboard" />
</key>
<key name="MoveFile.RECENT_KEYS">
<recent name="$PROJECT_DIR$/powerboard/src" />
</key>
@ -231,6 +268,19 @@
<option name="PORT" value="5005" />
<method />
</configuration>
<configuration default="true" type="Applet" factoryName="Applet">
<module name="" />
<option name="MAIN_CLASS_NAME" />
<option name="HTML_FILE_NAME" />
<option name="HTML_USED" value="false" />
<option name="WIDTH" value="400" />
<option name="HEIGHT" value="300" />
<option name="POLICY_FILE" value="$APPLICATION_HOME_DIR$/bin/appletviewer.policy" />
<option name="VM_PARAMETERS" />
<option name="ALTERNATIVE_JRE_PATH_ENABLED" value="false" />
<option name="ALTERNATIVE_JRE_PATH" />
<method />
</configuration>
<configuration default="true" type="TestNG" factoryName="TestNG">
<extension name="coverage" enabled="false" merge="false" sample_coverage="true" runner="idea" />
<module name="" />
@ -259,19 +309,6 @@
<listeners />
<method />
</configuration>
<configuration default="true" type="Applet" factoryName="Applet">
<module name="" />
<option name="MAIN_CLASS_NAME" />
<option name="HTML_FILE_NAME" />
<option name="HTML_USED" value="false" />
<option name="WIDTH" value="400" />
<option name="HEIGHT" value="300" />
<option name="POLICY_FILE" value="$APPLICATION_HOME_DIR$/bin/appletviewer.policy" />
<option name="VM_PARAMETERS" />
<option name="ALTERNATIVE_JRE_PATH_ENABLED" value="false" />
<option name="ALTERNATIVE_JRE_PATH" />
<method />
</configuration>
<configuration default="true" type="Application" factoryName="Application">
<extension name="coverage" enabled="false" merge="false" sample_coverage="true" runner="idea" />
<option name="MAIN_CLASS_NAME" />
@ -357,14 +394,26 @@
<created>1371043908804</created>
<updated>1371043908804</updated>
</task>
<option name="localTasksCounter" value="5" />
<task id="LOCAL-00005" summary="bugfixes, live check on avr&#10;working for now">
<created>1371075233272</created>
<updated>1371075233272</updated>
</task>
<task id="LOCAL-00006" summary="changed resistor values for 7-Seg&#10;removed lm371 due to lack of voltage">
<created>1371166480748</created>
<updated>1371166480748</updated>
</task>
<task id="LOCAL-00007" summary="changed counter (bugfix)&#10;changed baudrate to 19200">
<created>1371166541841</created>
<updated>1371166541841</updated>
</task>
<option name="localTasksCounter" value="8" />
<servers />
</component>
<component name="ToolWindowManager">
<frame x="-4" y="25" width="1608" height="853" extended-state="6" />
<editor active="false" />
<layout>
<window_info id="Changes" active="true" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="true" weight="0.328125" sideWeight="0.5" order="11" side_tool="false" content_ui="tabs" />
<window_info id="Changes" active="true" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="true" weight="0.32670453" sideWeight="0.5" order="11" side_tool="false" content_ui="tabs" />
<window_info id="Palette" active="false" anchor="right" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="3" side_tool="false" content_ui="tabs" />
<window_info id="Ant Build" active="false" anchor="right" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.25" sideWeight="0.5" order="1" side_tool="false" content_ui="tabs" />
<window_info id="Database" active="false" anchor="right" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="6" side_tool="false" content_ui="tabs" />
@ -379,7 +428,7 @@
<window_info id="Maven Projects" active="false" anchor="right" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="5" side_tool="false" content_ui="tabs" />
<window_info id="Commander" active="false" anchor="right" auto_hide="false" internal_type="SLIDING" type="SLIDING" visible="false" weight="0.4" sideWeight="0.5" order="0" side_tool="false" content_ui="tabs" />
<window_info id="Application Servers" active="false" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="10" side_tool="false" content_ui="tabs" />
<window_info id="Project" active="false" anchor="left" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="true" weight="0.3011583" sideWeight="0.671875" order="0" side_tool="false" content_ui="combo" />
<window_info id="Project" active="false" anchor="left" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="true" weight="0.3011583" sideWeight="0.67329544" order="0" side_tool="false" content_ui="combo" />
<window_info id="Run" active="false" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="3" side_tool="false" content_ui="tabs" />
<window_info id="Cvs" active="false" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.25" sideWeight="0.5" order="5" side_tool="false" content_ui="tabs" />
<window_info id="Message" active="false" anchor="bottom" auto_hide="false" internal_type="DOCKED" type="DOCKED" visible="false" weight="0.33" sideWeight="0.5" order="1" side_tool="false" content_ui="tabs" />
@ -430,7 +479,7 @@
<option name="WRAP_WHEN_TYPING_REACHES_RIGHT_MARGIN" value="false" />
<option name="FORCE_NON_EMPTY_COMMENT" value="false" />
<option name="CLEAR_INITIAL_COMMIT_MESSAGE" value="false" />
<option name="LAST_COMMIT_MESSAGE" value="working, refactured a bit, optimised for size" />
<option name="LAST_COMMIT_MESSAGE" value="changed counter (bugfix)&#10;changed baudrate to 19200" />
<option name="MAKE_NEW_CHANGELIST_ACTIVE" value="false" />
<option name="OPTIMIZE_IMPORTS_BEFORE_PROJECT_COMMIT" value="false" />
<option name="CHECK_FILES_UP_TO_DATE_BEFORE_COMMIT" value="false" />
@ -448,6 +497,9 @@
<MESSAGE value="added first draft of overvoltage protection by using dump load" />
<MESSAGE value="optimisations in adc code" />
<MESSAGE value="working, refactured a bit, optimised for size" />
<MESSAGE value="bugfixes, live check on avr&#10;working for now" />
<MESSAGE value="changed resistor values for 7-Seg&#10;removed lm371 due to lack of voltage" />
<MESSAGE value="changed counter (bugfix)&#10;changed baudrate to 19200" />
</component>
<component name="XDebuggerManager">
<breakpoint-manager />
@ -457,99 +509,180 @@
<option name="FILTER_TARGETS" value="false" />
</component>
<component name="editorHistoryManager">
<entry file="file://$PROJECT_DIR$/displayboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="0" column="0" selection-start="0" selection-end="0" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="5" column="31" selection-start="95" selection-end="95" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/powerboard.iml">
<provider selected="true" editor-type-id="text-editor">
<state line="0" column="0" selection-start="0" selection-end="0" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="19" column="28" selection-start="429" selection-end="429" vertical-scroll-proportion="0.06942393">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/adc.c">
<provider selected="true" editor-type-id="text-editor">
<state line="8" column="39" selection-start="169" selection-end="169" vertical-scroll-proportion="0.1843318">
<folding />
</state>
<state line="8" column="39" selection-start="169" selection-end="169" vertical-scroll-proportion="0.1843318" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/adc.h">
<provider selected="true" editor-type-id="text-editor">
<state line="4" column="11" selection-start="73" selection-end="73" vertical-scroll-proportion="0.0921659">
<folding />
</state>
<state line="4" column="11" selection-start="73" selection-end="73" vertical-scroll-proportion="0.0921659" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/uart.c">
<provider selected="true" editor-type-id="text-editor">
<state line="80" column="76" selection-start="2948" selection-end="2948" vertical-scroll-proportion="-1.9201807">
<folding>
<element signature="n#!!doc" expanded="true" />
</folding>
<state line="80" column="76" selection-start="2948" selection-end="2948" vertical-scroll-proportion="-1.9201807" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/utils.h">
<provider selected="true" editor-type-id="text-editor">
<state line="5" column="32" selection-start="142" selection-end="142" vertical-scroll-proportion="0.0" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/uart.h">
<provider selected="true" editor-type-id="text-editor">
<state line="176" column="0" selection-start="6326" selection-end="6326" vertical-scroll-proportion="0.7784343" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="62" column="28" selection-start="1637" selection-end="1637" vertical-scroll-proportion="0.3323486" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/utils.h">
<provider selected="true" editor-type-id="text-editor">
<state line="4" column="45" selection-start="71" selection-end="112" vertical-scroll-proportion="0.08836524" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="21" column="22" selection-start="465" selection-end="465" vertical-scroll-proportion="0.46391752" />
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/utils.c">
<provider selected="true" editor-type-id="text-editor">
<state line="30" column="22" selection-start="656" selection-end="673" vertical-scroll-proportion="0.66273934">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/main.h">
<provider selected="true" editor-type-id="text-editor">
<state line="31" column="36" selection-start="864" selection-end="864" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/utils.h">
<provider selected="true" editor-type-id="text-editor">
<state line="5" column="32" selection-start="142" selection-end="142" vertical-scroll-proportion="0.0">
<state line="31" column="36" selection-start="864" selection-end="864" vertical-scroll-proportion="0.6848306">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/utils.c">
<provider selected="true" editor-type-id="text-editor">
<state line="21" column="21" selection-start="442" selection-end="442" vertical-scroll-proportion="0.46528804">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/uart.h">
<provider selected="true" editor-type-id="text-editor">
<state line="176" column="0" selection-start="6326" selection-end="6326" vertical-scroll-proportion="0.7784343">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/Makefile">
<provider selected="true" editor-type-id="text-editor">
<state line="62" column="28" selection-start="1637" selection-end="1637" vertical-scroll-proportion="0.3323486">
<state line="33" column="0" selection-start="760" selection-end="865" vertical-scroll-proportion="0.72901326">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/powerboard/src/main.c">
<provider selected="true" editor-type-id="text-editor">
<state line="179" column="32" selection-start="4434" selection-end="4434" vertical-scroll-proportion="0.67713004">
<state line="159" column="34" selection-start="4186" selection-end="4186" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/main.h">
<provider selected="true" editor-type-id="text-editor">
<state line="20" column="28" selection-start="506" selection-end="522" vertical-scroll-proportion="0.0">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/uart.h">
<provider selected="true" editor-type-id="text-editor">
<state line="141" column="11" selection-start="5298" selection-end="5298" vertical-scroll-proportion="0.5301915">
<folding />
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/uart.c">
<provider selected="true" editor-type-id="text-editor">
<state line="434" column="55" selection-start="14628" selection-end="14628" vertical-scroll-proportion="0.490991">
<folding>
<element signature="n#!!doc" expanded="true" />
</folding>
</state>
</provider>
</entry>
<entry file="file://$PROJECT_DIR$/displayboard/src/main.c">
<provider selected="true" editor-type-id="text-editor">
<state line="98" column="17" selection-start="1974" selection-end="1974" vertical-scroll-proportion="0.738255">
<folding />
</state>
</provider>
</entry>
</component>
<component name="masterDetails">
<states>
<state key="ArtifactsStructureConfigurable.UI">
<settings>
<artifact-editor />
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
<state key="FacetStructureConfigurable.UI">
<settings>
<last-edited>No facets are configured</last-edited>
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
<state key="GlobalLibrariesConfigurable.UI">
<settings>
<last-edited>Node.js v0.8.17 Core Modules</last-edited>
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
<state key="JdkListConfigurable.UI">
<settings>
<last-edited>1.6</last-edited>
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
<state key="ModuleStructureConfigurable.UI">
<settings>
<last-edited>powerboard</last-edited>
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
<option value="0.5" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
<state key="ProjectLibrariesConfigurable.UI">
<settings>
<splitter-proportions>
<option name="proportions">
<list>
<option value="0.2" />
</list>
</option>
</splitter-proportions>
</settings>
</state>
</states>
</component>
</project>

View File

@ -1,56 +1,276 @@
COMPILER=G++
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make program = Download the hex file to the device, using avrdude. Please
# customize the avrdude settings below first!
#
# To rebuild project do "make clean" then "make all".
#
# todo: object files into output path, processing c / c++ files in the same time (?), nested directories for source files (?)
C = c
OUTPUT_PATH = out/production/displayboard/
SOURCE_PATH = src/
EXE = $(OUTPUT_PATH)displayboard
MCU = atmega32
F_CPU = 8000000
ifeq ($(COMPILER), G++)
ifeq ($(OS),Windows_NT)
OBJ = obj
else
OBJ = o
endif
COPT = -O2
CCMD = g++
OBJFLAG = -o
EXEFLAG = -o
# INCLUDES = -I../.includes
INCLUDES =
# LIBS = -lgc
LIBS =
# LIBPATH = -L../gc/.libs
LIBPATH =
CPPFLAGS = $(COPT) -g $(INCLUDES)
LDFLAGS = $(LIBPATH) -g $(LIBS)
DEP = dep
else
OBJ = obj
COPT = /O2
CCMD = cl
OBJFLAG = /Fo
EXEFLAG = /Fe
# INCLUDES = /I..\\.includes
INCLUDES =
# LIBS = ..\\.libs\\libgc.lib
LIBS =
CPPFLAGS = $(COPT) /DEBUG $(INCLUDES)
LDFLAGS = /DEBUG
endif
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
OBJS := $(patsubst %.$(C),%.$(OBJ),$(wildcard $(SOURCE_PATH)*.$(C)))
# Target file name (without extension).
TARGET = main
%.$(OBJ):%.$(C)
@echo Compiling $(basename $<)...
$(CCMD) -c $(CPPFLAGS) $(CXXFLAGS) $< $(OBJFLAG)$@
SRC = src/$(TARGET).c src/utils.c src/uart.c
all: $(OBJS)
@echo Linking...
$(CCMD) $(LDFLAGS) $^ $(LIBS) $(EXEFLAG) $(EXE)
clean:
rm -rf $(SOURCE_PATH)*.$(OBJ) $(EXE)
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS = src/
# Compiler flag to set the C Standard level.
# c89 - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99 - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here
CDEFS =
# Place -I options here
CINCS =
# Compiler flags.
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_CPU=$(F_CPU) #-DDEBUG
# External memory options
# Linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
# Programming support using avrdude. Settings and variables.
AVRDUDE_PROGRAMMER = usbasp
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
# ---------------------------------------------------------------------------
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
build: elf hex eep lss sym
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
finished:
@echo $(MSG_ERRORS_NONE)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
sizeafter:
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list finished end
clean_list :
@echo
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).hex
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET).obj
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).obj
$(REMOVE) $(TARGET).a90
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lnk
$(REMOVE) $(TARGET).lss
$(REMOVE) $(OBJ)
$(REMOVE) $(LST)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) .dep/*
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program
rebuild: clean all
#rebuild is not entirely correct

View File

@ -0,0 +1,122 @@
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include "utils.h"
#include "main.h"
#include "uart.h"
volatile uint16_t syscounter = 0;
volatile uint16_t digitcounter = 0;
uint8_t digit = 0;
uint8_t digitbuffer[6] = { 0,0,0,0,0,0 };
const uint8_t digit_translate[10] = {
63, 6, 91, 79, 102, 109, 125, 7, 127, 111
};
void timer_init(void) {
// clock is 8MHz
TCCR1B |= _BV(WGM12) | _BV(CS11) | _BV(CS10) ; // CTC Mode for Timer 1 (16Bit) with prescale of 64
OCR1A = 125; // 1000Hz
TIMSK = _BV(OCIE1A);
sei(); // enable interrupts
}
void ports_init(void) {
// make column / digit driver pins to output
LEDDIG_DDR |= _BV(LEDS_MID1) | _BV(LEDS_MID2) | _BV(LEDS_LOAD) | _BV(LEDS_GEN);
SEVENSEGDIG_DDR |= _BV(DIG0) | _BV(DIG1) | _BV(DIG2) | _BV(DIG3) | _BV(DIG4) | _BV(DIG5);
// make data ports to output
LED_DDR = 0xff;
SEVENSEG_DDR = 0xff;
SEVENSEGDIG_PORT = 0;
SEVENSEG_PORT = 0;
LEDDIG_PORT = 0;
LED_PORT = 0;
}
void print_uint8(uint8_t display, uint8_t value) {
uint8_t d[3];
d[2] = (value % 1000 / 100 );
d[1] = (value % 100 / 10 );
d[0] = (value % 10);
if(display == 0) {
for(uint8_t i = 0; i< 3; i++) {
digitbuffer[i] = digit_translate[d[i]];
}
} else {
for(uint8_t i = 0; i< 3; i++) {
digitbuffer[i+3] = digit_translate[d[i]];
}
}
}
int main(void) {
ports_init();
timer_init();
uart_init(UART_BAUD_SELECT(19200,F_CPU));
uint8_t temp = 0;
uint8_t uart_char = 0;
digit = 0;
while(1) {
if(digitcounter == 2) {
digitcounter = 0;
digit++;
if(digit >5) digit = 0;
SEVENSEG_PORT = digitbuffer[digit];
SEVENSEGDIG_PORT = _BV(digit+2);
}
if(syscounter == 200) {
uart_putc('a');
uart_char = uart_getc();
if(uart_char != UART_NO_DATA) {
}
print_uint8(0, temp);
print_uint8(1, temp);
syscounter = 0;
temp++;
}
}
return(0);
}
// system timer
SIGNAL(TIMER1_COMPA_vect) {
syscounter++;
digitcounter++;
}

View File

@ -0,0 +1,29 @@
#ifndef _main_h
#define _main_h
#define SEVENSEG_PORT PORTA
#define SEVENSEG_DDR DDRA
#define LED_PORT PORTC
#define LED_DDR DDRC
#define DIG0 PD2
#define DIG1 PD3
#define DIG2 PD4
#define DIG3 PD5
#define DIG4 PD6
#define DIG5 PD7
#define LEDS_MID1 PB0
#define LEDS_MID2 PB1
#define LEDS_LOAD PB2
#define LEDS_GEN PB3
#define SEVENSEGDIG_PORT PORTD
#define SEVENSEGDIG_DDR DDRD
#define LEDDIG_PORT PORTB
#define LEDDIG_DDR DDRB
#endif

View File

@ -0,0 +1,664 @@
/*************************************************************************
Title: Interrupt UART library with receive/transmit circular buffers
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
File: $Id: uart.c,v 1.10 2013/06/02 07:27:04 peter Exp $
Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher
Hardware: any AVR with built-in UART,
License: GNU General Public License
DESCRIPTION:
An interrupt is generated when the UART has finished transmitting or
receiving a byte. The interrupt handling routines use circular buffers
for buffering received and transmitted data.
The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define
the buffer size in bytes. Note that these variables must be a
power of 2.
USAGE:
Refere to the header file uart.h for a description of the routines.
See also example test_uart.c.
NOTES:
Based on Atmel Application Note AVR306
LICENSE:
Copyright (C) 2006 Peter Fleury
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*************************************************************************/
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include "uart.h"
/*
* constants and macros
*/
/* size of RX/TX buffers */
#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1)
#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1)
#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK )
#error RX buffer size is not a power of 2
#endif
#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK )
#error TX buffer size is not a power of 2
#endif
#if defined(__AVR_AT90S2313__) \
|| defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \
|| defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \
|| defined(__AVR_ATmega103__)
/* old AVR classic or ATmega103 with one UART */
#define AT90_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS USR
#define UART0_CONTROL UCR
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__)
/* old AVR classic with one UART */
#define AT90_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
|| defined(__AVR_ATmega323__)
/* ATmega with one USART */
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RXC_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined (__AVR_ATmega8515__) || defined(__AVR_ATmega8535__)
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega163__)
/* ATmega163 with one UART */
#define ATMEGA_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega162__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RXC_vect
#define UART1_RECEIVE_INTERRUPT USART1_RXC_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega161__)
/* ATmega with UART */
#error "AVR ATmega161 currently not supported by this libaray !"
#elif defined(__AVR_ATmega169__)
/* ATmega with one USART */
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega48__) || defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) \
|| defined(__AVR_ATmega3250__) || defined(__AVR_ATmega3290__) ||defined(__AVR_ATmega6450__) || defined(__AVR_ATmega6490__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATtiny2313__)
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega329__) || \
defined(__AVR_ATmega649__) || \
defined(__AVR_ATmega325__) || \
defined(__AVR_ATmega645__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega644__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#else
#error "no UART definition for MCU available"
#endif
/*
* module global variables
*/
static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE];
static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE];
static volatile unsigned char UART_TxHead;
static volatile unsigned char UART_TxTail;
static volatile unsigned char UART_RxHead;
static volatile unsigned char UART_RxTail;
static volatile unsigned char UART_LastRxError;
#if defined( ATMEGA_USART1 )
static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE];
static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE];
static volatile unsigned char UART1_TxHead;
static volatile unsigned char UART1_TxTail;
static volatile unsigned char UART1_RxHead;
static volatile unsigned char UART1_RxTail;
static volatile unsigned char UART1_LastRxError;
#endif
ISR (UART0_RECEIVE_INTERRUPT)
/*************************************************************************
Function: UART Receive Complete interrupt
Purpose: called when the UART has received a character
**************************************************************************/
{
unsigned char tmphead;
unsigned char data;
unsigned char usr;
unsigned char lastRxError;
/* read UART status register and UART data register */
usr = UART0_STATUS;
data = UART0_DATA;
/* */
#if defined( AT90_UART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#elif defined( ATMEGA_USART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#elif defined( ATMEGA_USART0 )
lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) );
#elif defined ( ATMEGA_UART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#endif
/* calculate buffer index */
tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK;
if ( tmphead == UART_RxTail ) {
/* error: receive buffer overflow */
lastRxError = UART_BUFFER_OVERFLOW >> 8;
}else{
/* store new index */
UART_RxHead = tmphead;
/* store received data in buffer */
UART_RxBuf[tmphead] = data;
}
UART_LastRxError |= lastRxError;
}
ISR (UART0_TRANSMIT_INTERRUPT)
/*************************************************************************
Function: UART Data Register Empty interrupt
Purpose: called when the UART is ready to transmit the next byte
**************************************************************************/
{
unsigned char tmptail;
if ( UART_TxHead != UART_TxTail) {
/* calculate and store new buffer index */
tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK;
UART_TxTail = tmptail;
/* get one byte from buffer and write it to UART */
UART0_DATA = UART_TxBuf[tmptail]; /* start transmission */
}else{
/* tx buffer empty, disable UDRE interrupt */
UART0_CONTROL &= ~_BV(UART0_UDRIE);
}
}
/*************************************************************************
Function: uart_init()
Purpose: initialize UART and set baudrate
Input: baudrate using macro UART_BAUD_SELECT()
Returns: none
**************************************************************************/
void uart_init(unsigned int baudrate)
{
UART_TxHead = 0;
UART_TxTail = 0;
UART_RxHead = 0;
UART_RxTail = 0;
#if defined( AT90_UART )
/* set baud rate */
UBRR = (unsigned char)baudrate;
/* enable UART receiver and transmmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN);
#elif defined (ATMEGA_USART)
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRRH = (unsigned char)(baudrate>>8);
UBRRL = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL
UCSRC = (1<<URSEL)|(3<<UCSZ0);
#else
UCSRC = (3<<UCSZ0);
#endif
#elif defined (ATMEGA_USART0 )
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X0); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRR0H = (unsigned char)(baudrate>>8);
UBRR0L = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE0)|(1<<RXEN0)|(1<<TXEN0);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL0
UCSR0C = (1<<URSEL0)|(3<<UCSZ00);
#else
UCSR0C = (3<<UCSZ00);
#endif
#elif defined ( ATMEGA_UART )
/* set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRRHI = (unsigned char)(baudrate>>8);
UBRR = (unsigned char) baudrate;
/* Enable UART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
#endif
}/* uart_init */
/*************************************************************************
Function: uart_getc()
Purpose: return byte from ringbuffer
Returns: lower byte: received byte from ringbuffer
higher byte: last receive error
**************************************************************************/
unsigned int uart_getc(void)
{
unsigned char tmptail;
unsigned char data;
if ( UART_RxHead == UART_RxTail ) {
return UART_NO_DATA; /* no data available */
}
/* calculate /store buffer index */
tmptail = (UART_RxTail + 1) & UART_RX_BUFFER_MASK;
UART_RxTail = tmptail;
/* get data from receive buffer */
data = UART_RxBuf[tmptail];
data = (UART_LastRxError << 8) + data;
UART_LastRxError = 0;
return data;
}/* uart_getc */
/*************************************************************************
Function: uart_putc()
Purpose: write byte to ringbuffer for transmitting via UART
Input: byte to be transmitted
Returns: none
**************************************************************************/
void uart_putc(unsigned char data)
{
unsigned char tmphead;
tmphead = (UART_TxHead + 1) & UART_TX_BUFFER_MASK;
while ( tmphead == UART_TxTail ){
;/* wait for free space in buffer */
}
UART_TxBuf[tmphead] = data;
UART_TxHead = tmphead;
/* enable UDRE interrupt */
UART0_CONTROL |= _BV(UART0_UDRIE);
return 0;
}/* uart_putc */
/*************************************************************************
Function: uart_puts()
Purpose: transmit string to UART
Input: string to be transmitted
Returns: none
**************************************************************************/
void uart_puts(const char *s )
{
while (*s)
uart_putc(*s++);
}/* uart_puts */
/*************************************************************************
Function: uart_puts_p()
Purpose: transmit string from program memory to UART
Input: program memory string to be transmitted
Returns: none
**************************************************************************/
void uart_puts_p(const char *progmem_s )
{
register char c;
while ( (c = pgm_read_byte(progmem_s++)) )
uart_putc(c);
}/* uart_puts_p */
/*
* these functions are only for ATmegas with two USART
*/
#if defined( ATMEGA_USART1 )
ISR(UART1_RECEIVE_INTERRUPT)
/*************************************************************************
Function: UART1 Receive Complete interrupt
Purpose: called when the UART1 has received a character
**************************************************************************/
{
unsigned char tmphead;
unsigned char data;
unsigned char usr;
unsigned char lastRxError;
/* read UART status register and UART data register */
usr = UART1_STATUS;
data = UART1_DATA;
/* */
lastRxError = (usr & (_BV(FE1)|_BV(DOR1)) );
/* calculate buffer index */
tmphead = ( UART1_RxHead + 1) & UART_RX_BUFFER_MASK;
if ( tmphead == UART1_RxTail ) {
/* error: receive buffer overflow */
lastRxError = UART_BUFFER_OVERFLOW >> 8;
}else{
/* store new index */
UART1_RxHead = tmphead;
/* store received data in buffer */
UART1_RxBuf[tmphead] = data;
}
UART1_LastRxError |= lastRxError;
}
ISR(UART1_TRANSMIT_INTERRUPT)
/*************************************************************************
Function: UART1 Data Register Empty interrupt
Purpose: called when the UART1 is ready to transmit the next byte
**************************************************************************/
{
unsigned char tmptail;
if ( UART1_TxHead != UART1_TxTail) {
/* calculate and store new buffer index */
tmptail = (UART1_TxTail + 1) & UART_TX_BUFFER_MASK;
UART1_TxTail = tmptail;
/* get one byte from buffer and write it to UART */
UART1_DATA = UART1_TxBuf[tmptail]; /* start transmission */
}else{
/* tx buffer empty, disable UDRE interrupt */
UART1_CONTROL &= ~_BV(UART1_UDRIE);
}
}
/*************************************************************************
Function: uart1_init()
Purpose: initialize UART1 and set baudrate
Input: baudrate using macro UART_BAUD_SELECT()
Returns: none
**************************************************************************/
void uart1_init(unsigned int baudrate)
{
UART1_TxHead = 0;
UART1_TxTail = 0;
UART1_RxHead = 0;
UART1_RxTail = 0;
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART1_STATUS = (1<<U2X1); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRR1H = (unsigned char)(baudrate>>8);
UBRR1L = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART1_CONTROL = _BV(RXCIE1)|(1<<RXEN1)|(1<<TXEN1);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL1
UCSR1C = (1<<URSEL1)|(3<<UCSZ10);
#else
UCSR1C = (3<<UCSZ10);
#endif
}/* uart_init */
/*************************************************************************
Function: uart1_getc()
Purpose: return byte from ringbuffer
Returns: lower byte: received byte from ringbuffer
higher byte: last receive error
**************************************************************************/
unsigned int uart1_getc(void)
{
unsigned char tmptail;
unsigned char data;
if ( UART1_RxHead == UART1_RxTail ) {
return UART_NO_DATA; /* no data available */
}
/* calculate /store buffer index */
tmptail = (UART1_RxTail + 1) & UART_RX_BUFFER_MASK;
UART1_RxTail = tmptail;
/* get data from receive buffer */
data = UART1_RxBuf[tmptail];
data = (UART1_LastRxError << 8) + data;
UART1_LastRxError = 0;
return data;
}/* uart1_getc */
/*************************************************************************
Function: uart1_putc()
Purpose: write byte to ringbuffer for transmitting via UART
Input: byte to be transmitted
Returns: none
**************************************************************************/
void uart1_putc(unsigned char data)
{
unsigned char tmphead;
tmphead = (UART1_TxHead + 1) & UART_TX_BUFFER_MASK;
while ( tmphead == UART1_TxTail ){
;/* wait for free space in buffer */
}
UART1_TxBuf[tmphead] = data;
UART1_TxHead = tmphead;
/* enable UDRE interrupt */
UART1_CONTROL |= _BV(UART1_UDRIE);
}/* uart1_putc */
/*************************************************************************
Function: uart1_puts()
Purpose: transmit string to UART1
Input: string to be transmitted
Returns: none
**************************************************************************/
void uart1_puts(const char *s )
{
while (*s)
uart1_putc(*s++);
}/* uart1_puts */
/*************************************************************************
Function: uart1_puts_p()
Purpose: transmit string from program memory to UART1
Input: program memory string to be transmitted
Returns: none
**************************************************************************/
void uart1_puts_p(const char *progmem_s )
{
register char c;
while ( (c = pgm_read_byte(progmem_s++)) )
uart1_putc(c);
}/* uart1_puts_p */
#endif

View File

@ -0,0 +1,180 @@
#ifndef UART_H
#define UART_H
/************************************************************************
Title: Interrupt UART library with receive/transmit circular buffers
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
File: $Id: uart.h,v 1.12 2012/11/19 19:52:27 peter Exp $
Software: AVR-GCC 4.1, AVR Libc 1.4
Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz
License: GNU General Public License
Usage: see Doxygen manual
LICENSE:
Copyright (C) 2006 Peter Fleury
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
************************************************************************/
/**
* @defgroup pfleury_uart UART Library
* @code #include <uart.h> @endcode
*
* @brief Interrupt UART library using the built-in UART with transmit and receive circular buffers.
*
* This library can be used to transmit and receive data through the built in UART.
*
* An interrupt is generated when the UART has finished transmitting or
* receiving a byte. The interrupt handling routines use circular buffers
* for buffering received and transmitted data.
*
* The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define
* the size of the circular buffers in bytes. Note that these constants must be a power of 2.
* You may need to adapt this constants to your target and your application by adding
* CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your Makefile.
*
* @note Based on Atmel Application Note AVR306
* @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
*/
/**@{*/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
/*
** constants and macros
*/
/** @brief UART Baudrate Expression
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
*/
#define UART_BAUD_SELECT(baudRate,xtalCpu) (((xtalCpu) + 8UL * (baudRate)) / (16UL * (baudRate)) -1UL)
/** @brief UART Baudrate Expression for ATmega double speed mode
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
*/
#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) ( ((((xtalCpu) + 4UL * (baudRate)) / (8UL * (baudRate)) -1UL)) | 0x8000)
/** Size of the circular receive buffer, must be power of 2 */
#ifndef UART_RX_BUFFER_SIZE
#define UART_RX_BUFFER_SIZE 32
#endif
/** Size of the circular transmit buffer, must be power of 2 */
#ifndef UART_TX_BUFFER_SIZE
#define UART_TX_BUFFER_SIZE 32
#endif
/* test if the size of the circular buffers fits into SRAM */
#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) )
#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM"
#endif
/*
** high byte error return code of uart_getc()
*/
#define UART_FRAME_ERROR 0x1000 /* Framing Error by UART */
#define UART_OVERRUN_ERROR 0x0800 /* Overrun condition by UART */
#define UART_PARITY_ERROR 0x0400 /* Parity Error by UART */
#define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */
#define UART_NO_DATA 0x0100 /* no receive data available */
/*
** function prototypes
*/
/**
@brief Initialize UART and set baudrate
@param baudrate Specify baudrate using macro UART_BAUD_SELECT()
@return none
*/
extern void uart_init(unsigned int baudrate);
/**
* @brief Get received byte from ringbuffer
*
* Returns in the lower byte the received character and in the
* higher byte the last receive error.
* UART_NO_DATA is returned when no data is available.
*
* @param void
* @return lower byte: received byte from ringbuffer
* @return higher byte: last receive status
* - \b 0 successfully received data from UART
* - \b UART_NO_DATA
* <br>no receive data available
* - \b UART_BUFFER_OVERFLOW
* <br>Receive ringbuffer overflow.
* We are not reading the receive buffer fast enough,
* one or more received character have been dropped
* - \b UART_OVERRUN_ERROR
* <br>Overrun condition by UART.
* A character already present in the UART UDR register was
* not read by the interrupt handler before the next character arrived,
* one or more received characters have been dropped.
* - \b UART_FRAME_ERROR
* <br>Framing Error by UART
*/
extern unsigned int uart_getc(void);
/**
* @brief Put byte to ringbuffer for transmitting via UART
* @param data byte to be transmitted
* @return none
*/
extern void uart_putc(unsigned char data);
/**
* @brief Put string to ringbuffer for transmitting via UART
*
* The string is buffered by the uart library in a circular buffer
* and one character at a time is transmitted to the UART using interrupts.
* Blocks if it can not write the whole string into the circular buffer.
*
* @param s string to be transmitted
* @return none
*/
extern void uart_puts(const char *s );
/**
* @brief Put string from program memory to ringbuffer for transmitting via UART.
*
* The string is buffered by the uart library in a circular buffer
* and one character at a time is transmitted to the UART using interrupts.
* Blocks if it can not write the whole string into the circular buffer.
*
* @param s program memory string to be transmitted
* @return none
* @see uart_puts_P
*/
extern void uart_puts_p(const char *s );
/**
* @brief Macro to automatically put a string constant into program memory
*/
#define uart_puts_P(__s) uart_puts_p(PSTR(__s))
#endif // UART_H

View File

@ -0,0 +1,39 @@
#include <avr/io.h>
#include <util/delay.h>
#include "uart.h"
void wait(uint8_t count) {
uint8_t i;
if(count == 0) count = 100;
for(i=0;i<count;i++) {
_delay_ms(10);
}
}
void uart_print_voltage(uint16_t x) {
uart_putc(48 + (x / 10000));
uart_putc(48 + (x % 10000 /1000));
uart_putc('.');
uart_putc(48 + (x % 1000 / 100 ));
//uart_putc(48 + (x % 100 / 10 ));
//uart_putc(48 + (x % 10));
}
void uart_print_int16(int16_t x) {
if(x <0) uart_putc('-');
uart_putc(48 + (x / 10000));
uart_putc(48 + (x % 10000 /1000));
uart_putc(48 + (x % 1000 / 100 ));
uart_putc(48 + (x % 100 / 10 ));
uart_putc(48 + (x % 10));
}
void uart_print_uint16(uint16_t x) {
uart_putc(48 + (x / 10000));
uart_putc(48 + (x % 10000 /1000));
uart_putc(48 + (x % 1000 / 100 ));
uart_putc(48 + (x % 100 / 10 ));
uart_putc(48 + (x % 10));
}

View File

@ -0,0 +1,12 @@
#ifndef _utils_h
#define _utils_h
extern void wait(uint8_t count);
extern void uart_print_voltage(uint16_t);
extern void uart_print_int16(int16_t);
extern void uart_print_uint16(uint16_t);
#endif